Top 10k strings from z80.ini in <root> / bin / pc / Emulators / z80.zip /
Back to the directory listing
1 -xp l:\aaa % to specify your default directory for .Z80 files
1 %-xm c:\spectrum\disk % to specify your default microdrive file directory
1 %-w c:\spectrum\rs232\printer.lst % Redirect Spectrum RS232 output to file F
1 % will cause the utility TAP2TAPE to misbehave!
1 % switches, e.g. -c1 instead of -c -1 is permitted on the command line only.
1 % WARNING: Specifying a default .TAP output file using -to in this .INI file
1 % This is the configuration file for 'Z80' version 2.01a
1 % Spectrum hardware options:
1 % Sound options:
1 % RS232 redirection options:
1 % Putting more than one switch on a % line is allowed, but concatenation of
1 % Miscellaneous switches:
1 % Microdrive and tape options:
1 % Lines starting with a % sign are ignored.
1 % Joystick options:
1 % Emulator configuration:
1 % Display adapter options:
1 % All available switches are listed below. Some useful switches are:
1 % The next options all automatically select Single .TAP File mode:
1 % -z50.0 % Emulate the Spectrum at speed nnn.n%
1 % -yl % Low,
1 % -yh % high video synchronization mode
1 % -xz % Assume AZERTY keyboard layout
1 % -xw % Run in Windows compatibility mode
1 % -xv % 400-line VGA (For some Tridents)
1 % -xs % Default shifted cursor keys (NumLock) in '128 mode
1 % -xr F % Use file F as standard Spectrum rom
1 % -xp D % Select default directory D for .Z80 snapshot files
1 % -xi % Do not use internal PC speaker for 128 sound
1 % -xh % Extended Hercules graphics
1 % -xf % Switch full 16K of Interface I ROM
1 % -xc % Use CM/S chips on SoundBlaster for noise
1 % -xb % Black and white VGA
1 % -uF % Redirect file F to Spectrum RS232 input
1 % -ts C:\spectrum\caseta % Specify default directory for single .TAP file mode
1 % -to caseta1.tap % Use F{.TAP} as tape output (if exists, append)
1 % -tm % Mirror tape input to disk (Do also specify outputfile!)
1 % -ti caseta1.tap % Use F{.TAP} as tape input
1 % -te % Mirror tape input to disk in EXACT mode
1 % -td c:\spectrum\caseta % Select directory D for multiple .TAP file mode
1 % -s % Emulate a spectrum with SamRam
1 % -q % Plantronics, different palette
1 % -p % Plantronics graphics
1 % -oN % Redirect Spectrum RS232 output to COMn
1 % -n % Emulate a Spectrum without Interface I
1 % -kz % Use digital Zandbergen joystick
1 % -jk % Emulate Kempston joystick (instead of Cursor)
1 % -j2 % 2
1 % -j1 % Emulate Sinclair joysticks 1 or
1 % -iN % Redirect COMn to Spectrum RS232 input
1 % -h % Hercules graphics
1 % -f % Faster FLASH emulation
1 % -e % EGA graphics
1 % -c % CGA graphics
1 % -b1 % Use LPTn for tape I/O
1 % -aN % Redirect Spectrum RS232 output to LPTn
1 % -2 % Emulate an Issue-2 Spectrum
1 % -128 % Emulate a Spectrum 128 (can be used with -n)
1 % -z100 -l % to make the emulated Spectrum run at normal speed
1 % -xz % if you're using an AZERTY keyboard
1 % -xm c:\spectrum\disk % Select default directory D for .MDR files
1 % -xh % if you're using a Hercules adapter
1 % -xc % if you've got a Soundblaster with CM/S chips
1 % -m 1 utils.mdr % to have your utilities cartridge file inserted in
1 % -m 1 disk1.mdr % Insert cartridgefile F{.MDR} in microdrive N
1 % -g % No sound
1 % -128 % to emulate a Spectrum 128 by default
1 % % microdrive 1
1 % % (useful if you've got a fast computer)
1 -xe % Do not use expanded memory
1 -xa % Do not use Adlib for 128 sound
1 -v % VGA graphics
1 -r % Emulate the R register
1 -l % Better (but slower) LDIR/LDDR emulation
1 -kk % Do not look for analog or Zandbergen joystick
1 -d % Double interrupt frequency (100 Hz)