Top 10k strings from Z80.INI in <root> / bin / pc / Emulators / z80-305.zip /
Back to the directory listing
1 -z 100 % Emulation speed 100%
1 -xs % Default to shifted cursor keys in '128 mode
1 -xl 1 % * ZX Printer output to LPT1.
1 -l % Emulate LDIR faithfully (remove this for faster Jetset Willy)
1 -km % Control Spectrum joystick with MS Mouse
1 -ju 12435 % * User defined joystick = left Sinclair joystick by default, but
1 -jc % * ...select Cursor joystick instead of user def joystick
1 -d2 % * Set frame interrupt frequency to 100/2 = 50 Hz
1 -0e % Convert ZX Printer output into Epson format (-0h for HP-PCL)
1 %% -xh % OBSOLETE (was: Extended Hercules graphics)
1 %% -q % OBSOLETE (was: Plantronics, different palette)
1 %% -p % OBSOLETE (was: Plantronics graphics)
1 % useful switches are:
1 % turn it off again.
1 % line is permitted, but concatenation of switches, e.g. -c1 instead of -c -1
1 % is allowed on the command line only.
1 % This is the configuration file for 'Z80'
1 % Tape and Microdrive options:
1 % Standard switches:
1 % Spectrum hardware options:
1 % Specifying a switch twice, either here or on the command line, will usually
1 % Sound switches:
1 % Some switches are defaulted below. Remove or change them if necessary.
1 % RS232 redirection options:
1 % Miscellaneous switches:
1 % Lines starting with a % sign are ignored. Putting more than one switch on a
1 % Joystick options:
1 % Emulator configuration:
1 % Display adapter options:
1 % All available switches are listed below the default switches. Some especially
1 % ------------------
1 % (remove first % sign to activate them)
1 % (lines starting with * are hard-coded defaults; included for clarity)
1 % The next switches all automatically select Single .TAP File mode:
1 % -znnn.n % Emulate the Spectrum at speed nnn.n%
1 % -yl, -yh % Low, high video synchronization mode
1 % -xz % Assume AZERTY keyboard layout
1 % -xz % if you're using an AZERTY keyboard
1 % -xy % Dump trace of program in .OUT file
1 % -xx % Hi-resolution colour emulation
1 % -xw % Run in Windows compatibility mode
1 % -xv % 400-line VGA (for some Tridents)
1 % -xu % Use as little memory as possible; disable Hi Color Res emulation
1 % -xt % Use as little memory as possible
1 % -xs % Default to shifted cursor keys (NumLock) in '128 mode
1 % -xr F % Use file F as standard Spectrum rom
1 % -xq adr % Set base IO address for SoundBlaster (for -xo, -xc, default 0220)
1 % -xp c:\spectrum\progs % to specify your default directory for .Z80 files
1 % -xp D % Select default directory D for .Z80 snapshot files
1 % -xo -xq220 % if you have a Soundblaster at address 0220 (for
1 % -xo % Use SoundBlaster's A/D Converter for tape input
1 % -xm D % Select default directory D for .MDR files
1 % -xl N % Select LPTn for ZX-Printer output
1 % -xk % Emulate Multiface 128 interface (can't be used with SamRam)
1 % -xj % 'Off-line=wait' instead of 'Off-line=No ZX Printer'
1 % -xi % Do NOT use internal PC speaker for '128 sound
1 % -xh % if you're using a Hercules adapter
1 % -xg % Log all outs to FE in OUT log file, not only ones that make noise
1 % -xf % Switch full 16K of Interface I ROM
1 % -xe % Do not use expanded memory
1 % -xc % Use SoundBlaster CMS chips for noise (specify base addr if <> 220)
1 % -xc % if you've got a Soundblaster with CM/S chips
1 % -xb % Black-and-white VGA
1 % -xa % Do NOT use AdLib for 128 sound (use internal speaker instead)
1 % -wF % Redirect Spectrum RS232 output to file F
1 % -v % VGA graphics
1 % -uF % Redirect file F to Spectrum RS232 input
1 % -tx % Do not display tape info window when loading or saving
1 % -tw % Don't wrap load pointer of tapefile at end
1 % -tv F % Play .VOC file F to 'ear' input
1 % -ts D % Specify default directory for Single .TAP File mode
1 % -tp % Pause after loading .TAP block
1 % -to F % Use F{.TAP} as tape output (if exists, append)
1 % -tm % Mirror tape input to disk (Do also specify output file!)
1 % -ti F % Use F{.TAP} as tape input
1 % -te % Mirror tape input to disk in EXACT mode
1 % -td D % Select directory D for Multiple .TAP File mode
1 % -s % Emulate Spectrum with SamRam
1 % -r % Emulate the R register
1 % -oN % Redirect Spectrum RS232 output to COMn
1 % -n % Emulate Spectrum without Interface I
1 % -m N F % Insert cartridge file F{.MDR} into microdrive N
1 % -l % Better (but slower) LDIR/LDDR emulation
1 % -kz % Use digital Zandbergen joystick
1 % -kxABCD % Press key #CD for scan code #AB; see docs for details!
1 % -km % Use MS Mouse to control Spectrum joystick
1 % -kk % Do not look for analogue or Zandbergen joystick
1 % -ka % Emulate Spectrum AMX mouse interface controlled by MS Mouse
1 % -k2 % Use 2nd joystick as Sinclair 1 always
1 % -k1 % Do not use 2nd analogue joystick as Sinclair 1 (1,2,3,4,5)
1 % -ju<lf><rt><up><dn><fire> % Userdef joyst. ([=shft,]=symshft,/=enter,\=space)
1 % -jk % Emulate Kempston joystick (instead of Cursor)
1 % -j2 % Emulate Sinclair joystick 2 (keys 6,7,8,9 and 0)
1 % -iN % Redirect COMn to Spectrum RS232 input
1 % -h % Hercules graphics
1 % -g % No sound
1 % -e % EGA graphics
1 % -dN % Set frame irupt freq to 100/N Hz (set twice to make 50 Hz default)
1 % -c % CGA graphics
1 % -bN % Use LPTn for tape I/O
1 % -aN % Redirect Spectrum RS232 output to LPTn
1 % -9 % Default to M.G.T. interface instead of Interface I
1 % -2 % Emulate an Issue-2 Spectrum
1 % -1[28] % Emulate Spectrum 128 (can be used with -n)
1 % -128 % to emulate a Spectrum 128 by default
1 % -0sND % Set Disciple/+D drive N to D: (default -0s1A and -0s2B)
1 % -0p % M.G.T. = PLUS D
1 % -0m F % Build map of opcode locations in file F; see docs for details!
1 % -0i % Disable Disciple interrupt
1 % -0h % HP PCL printer (for ZX PRINTER and M.G.T. type)
1 % -0f N % Issue a Form Feed every N ZX Prtr lines on HP PCL printer
1 % -0e % Epson printer (for ZX PRINTER and M.G.T. type)
1 % -0d % M.G.T. = DISCiPLE ROM (default)
1 % -00 % Do not show intro screen, and don't pause at startup
1 % % tape input)