Top 10k strings from DIAGRAM.Z80 in <root> / bin / pc / Emulators / z80-305.zip /

Back to the directory listing

   3  Parts List",
   1 for PC's",
   1 eds to be adjusted forbest results. The bar, appearingin a moment, should point just  below 50 if there's a signal,   and should go to 0 when there   isn't."
   1 eds to be adjusted forbest results. The bar, appearingin a mo"
   1 ds to be adjusted forbest results. The bar, appearingin a mo"
   1 ;"This program checks your tape   interface. The bar at the top of"
   1 0orbest result
   1 0forbest result
   1 ''"The registered version of 'Z80' version 3.0 can load Spectrum   programs directly from tape, andwrite them back."
   1 ''"Resistors:","330",,"4.7k",,"10k",,"120k"
   1 '"You can use the SoundBlaster A/Dconverter as audio input. It is also possible to use the adapterof which you just saw the cir-  cuit diagram.  This adapter is  necessary if you want to SAVE   files to tape."
   1 '"The variable resistor in the    diagram needs to be adjusted forbest results. This program can  be used to calibrate the tape   adapter."
   1 '"The Emulator should not be in   Real mode for this program"
   1 '"Pot. meter:","25k linear"
   1 '"Capacitors:","4.7nF",,"680nF"
   1 '"(Press any key)"
   1 "the screen should point just"
   1 "below 50 if there is a signal."
   1 "It should go to 0 (instead of   100) if there is no signal."
   1  Tape-adapter for PC's",
   1  75    100"