Top 10k strings from TRANSHLP.DOC in <root> / bin / pc / Emulators / warsp251.zip /
Back to the directory listing
37 27 22 19 19 18 16 15 13 12 11 8 6 5 Was the loading successful? 5 4 3 3 3 2 and different constants 2 Well done! 2 Was the transfer successful? 2 Try with advanced setup 2 See Chapter 8 from the 2 Create empty tape file, or select it! 2 Warajevo 2.0 manual 2 Sorry, you must hack 2 or use Multiface! 2 connect cables and start the tape! 2 2 2 2 2 2 1 original Spectrum 128 1 on real Spectrum) look nonstandard? 1 make hex dump of program and type it on keyboard in the emulator!!! 1 loading from created TAP file! 1 load from the tape in multicolor mode 1 load from created TAP file! 1 for original Spectrum on real tape? 1 and select the tape device! 1 and play the game! 1 and multicolor mode! 1 Use external mixer setting program and 1 Transfer program from Internet 1 Transfer communication program to original Spectrum 1 Transfer blocks to PC using RS232 1 TapeFiles/Communications/Cassette/Receive from cassette 1 Tape-files/Communications/Cassette/Sample from cassette 1 TAP file from real tape? 1 Switch to the emulator and try 1 Switch to the emulator and 1 Switch on HCR border 1 Switch off screen generating! 1 Switch off HCR border! 1 Successful loading? 1 Save the snapshot 1 SNAPS/GAMES/BY-LETTER/D/DIAGRAM.ZIP 1 SMARTDRV and everything that can use RAM above 1Mb! 1 Let's try Real loading 1 LPT tape interface, let's try it 1 LPT port tape interface? 1 Is the program available on Internet? 1 Is the loader only turbo saved 1 Have you got internet access? 1 Have you got a 386 (at least with 1 Have you got SoundBlaster card? 1 Have all blocks on your original tape 1 Does your operating system 1 Does the program load on original Spectrum 1 Do you want to try 1 Do you want to obtain it ? 1 Do you want to have this tape 1 Do you have a computer with a 1 Convert created VOC file into a TAP file, 1 Connect tape, type LOAD "" 1 Connect LPT port tape interface 1 Compress this TAP file and use it! 1 COOLEDIT to sample program into VOC file 1 Are all blocks on your original tape 1 Although it is less reliable than 1 Adjust azimuth and volume! 1 but with normal leader tone? 1 Switch to the emulator and 1 Switch off Windows, QEMM, EMM386, HIMEM, RAMDISK, 1 SoundBlaster card and with 1 Have you got RS232, 1 Buy interface from B G SERVICES 1 (counters, strange order, etc.) 1 using Start button in the environment 1 other method? 1 or build it using schematic which 1 load the program from 1 and the communication program 1 Try using some sampling software like 1 FTP.NVG.UNIT.NO/PUB/SINCLAIR/ 1 Does the screen (during loading 1 Do you want to make 1 then try loading of this VOC file 1 more than 2M of RAM memory? 1 in Lunter's TAP format? 1 except line input on one channel! 1 allow shutting down 1 Switch to the emulator 1 Still nothing works? Oh well, the only thing you can do is to 1 into MS DOS mode? 1 and play the tape 1 and adjust its tuner 1 Is your machine fast enough to 1 Have you got a comms program 1 with current azimuth and volume? 1 this TAP file 1 switch off every sound source 1 standard loading speed? 1 may be found at address 1 and cable? 1 at the standard speed? 1 a lot of memory? 1 Have you got 1 and play it! 1 (Pentium + VGA card) 1 compress it, and use it! 1 then select an adequate input device, 1 and save it to the tape! 1 and adequate input device then 1 Select option 1 Select option 1 ENTER HERE! 1 1 1 1 1 1