Top 10k strings from libtool in <root> / bin / pc / Emulators / fuse-hc2000-hacks.7z / src / libspectrum /
Back to the directory listing
58 esac
39 else
33 continue
27 $opt_debug
25 done
19 ;;
17 $opt_debug
12 if test -n "$1"; then
12 continue
11 case $host in
10 case $host in
9 $opt_dry_run || {
8 cat <<"EOF"
8 *.la)
7 case $host in
7 fi
6 build_old_libs=yes
6 build_libtool_libs=no
6 lt_debugprintf (__FILE__, __LINE__,
6 func_to_host_path_result="$1"
6 func_to_host_file_result="$1"
6 *" $libdir "*) ;;
6 $ECHO "\
6 deplibs="$deplib $deplibs"
6 $ECHO \
5 func_convert_file_check "$1" "$func_to_host_file_result"
5 func_to_host_path_tmp1=$func_stripname_result
5 func_stripname : : "$1"
5 deplibs="$deplib $deplibs"
5 cat <<EOF
5 finalize_deplibs="$deplib $finalize_deplibs"
5 echo
5 compile_deplibs="$deplib $compile_deplibs"
5 case $arg in
5 *.lo)
5 "$func_to_host_path_tmp1" "$func_to_host_path_result"
4 preserve_args+=" $opt"
4 name=$func_stripname_result
4 name="$func_basename_result"
4 exit $EXIT_SUCCESS
4 arg="$func_quote_for_eval_result"
4 add="-l$name"
4 IFS="$save_ifs"
4 ##################################################
4 # func_to_host_file_result.
4 # determined imposters.
4 # We need an absolute path.
4 # This function is only a basic sanity check; it will hardly flush out
4 tmp_libs=
4 major=".$current"
4 if (quote_around)
4 generated+=" $gentop"
4 func_fatal_error "\`$vinfo' is not valid version information"
4 func_arith $current - $age
4 for deplib in $dependency_libs; do
4 case :$dllsearchpath: in
4 IFS="$save_ifs"
4 test "X$arg" = "X-lc" && continue
4 if test "$linkmode" = prog; then
4 if test "$build_old_libs" = yes; then
4 for arg
4 case $host_os in
4 case $deplib in
4 case $1 in
4 case " $sys_lib_dlsearch_path " in
4 shift
4 if test -n "$a_deplib" ; then
4 exit $EXIT_SUCCESS
4 cat <<EOF
4 case $lib in
4 break
3 your compiler does not support \`-c' and \`-o' together. If you
3 test -z "$libdir" && \
3 temporary object file, and libtool could not work around it because
3 repeat this compilation, it may succeed, by chance, but you had better
3 optarg="$1"
3 opt_verbose=false
3 opt_silent=false
3 library_names=
3 if test "$opt_mode" = relink; then
3 finalize_command+=" $arg"
3 exit $EXIT_FAILURE
3 echo "*** you link to this library. But I can only do this if you have a"
3 echo "*** shared version of the library, which you do not appear to have"
3 echo "*** I have the capability to make that library automatically link in when"
3 dir="$func_dirname_result"
3 compiler."
3 compile_command+=" $arg"
3 cat <<"EOF"
3 case $dir in
3 case $deplib in
3 case "$new_inherited_linker_flags " in
3 case " $new_libs " in
3 avoid parallel builds (make -j) in this platform, or get a better
3 `cat $lockfile 2>/dev/null`
3 This indicates that another process is trying to use the same
3 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
3 $opt_dry_run || $RM $removelist
3 #if defined (HAVE_DOS_BASED_FILE_SYSTEM)
3 # Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
3 # Check to see that this really is a libtool archive.
3 set dummy $deplibs_check_method; shift
3 non_pic_objects+=" $non_pic_object"
3 major=.$func_arith_result
3 if test "$#" -gt 0; then
3 gentop="$output_objdir/${outputname}x"
3 for obj in $save_oldobjs
3 case $version_type in
3 case $arg in
3 XFREE (tmp_pathspec);
3 test "X$libobjs" = "X " && libobjs=
3 return 0;
3 non_pic_objects+=" $non_pic_object"
3 if test "$build_libtool_libs" = yes; then
3 if $opt_preserve_dup_deps ; then
3 func_resolve_sysroot "$func_stripname_result"
3 func_error ${1+"$@"}
3 func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
3 func_convert_path_check : ";" \
3 exit $EXIT_SUCCESS
3 exit $?
3 dlopen_self=$dlopen_self_static
3 case ${1} in
3 IFS="$save_ifs"
3 *" $deplib "*) ;;
3 *" $arg "*) ;;
3 $ECHO "\
3 # See func_convert_path_msys_to_w32:
3 test -z "$concat_cmds" || concat_cmds=$concat_cmds~
3 test -n "$vinfo" && \
3 test -n "$release" && \
3 newdeplibs+=" $a_deplib"
3 mingw*)
3 if test -n "$shlibpath_var"; then
3 eval '$MV "$nlist"T "$nlist"'
3 case $file in
3 case "$tmp_libs " in
3 add="-l$name"
3 -shared)
3 -l*)
3 *" $libdir "*) ;;
3 $opt_dry_run || {
3 s/^# //
3 else
3 nonnull (name), nonnull (value));
2 } # !$opt_dry_run
2 test $# = 0 && func_missing_arg $opt && break
2 test "$build_libtool_libs" != yes && \
2 static const char *
2 skipped_export=false
2 save_ifs="$IFS"; IFS=','
2 return concat_name;
2 relink_command=
2 prev=xcompiler
2 prev=vinfo
2 prev=dlprefiles
2 opt_verbose=:
2 opt_silent=:
2 opt_help=false
2 opt_dry_run=false
2 old_library=
2 newdeplibs+=" $i"
2 match_pattern*)
2 link_command="$compile_var$compile_command$compile_rpath"
2 libname=`eval "\\$ECHO \"$libname_spec\""`
2 libdir="$hardcode_libdirs"
2 lib_linked=no
2 if test -z "$potlib" ; then
2 if test -z "$dlname"; then
2 if test -n "$postlink_cmds"; then
2 if test -n "$i" ; then
2 if test -n "$hardcode_libdir_flag_spec"; then
2 if test -n "$gentop"; then
2 if test -n "$export_symbols" && test -n "$include_expsyms"; then
2 if test -n "$dlprefiles"; then
2 if test -n "$destname"; then
2 if func_lalib_p "$file"; then
2 hardcode_libdirs+="$hardcode_libdir_separator$libdir"
2 func_stripname -l '' "$i"
2 func_stripname ' ' '' "$arg"
2 func_source "$file"
2 func_show_eval "$cmd" 'exit $?'
2 func_resolve_sysroot "$file"
2 func_replace_sysroot "$func_stripname_result"
2 func_quote_for_eval "$arg"
2 func_mode_help
2 func_lalib_unsafe_p "$file" \
2 func_fallback_echo ()
2 func_echo "Waiting for $lockfile to be removed"
2 func_dirname "$file" "" "."
2 func_basename "$lib"
2 for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
2 for flag in $args; do
2 file=$func_resolve_sysroot_result
2 exit $exit_status
2 eval shared_ext=\"$shrext_cmds\"
2 eval rpath=\" $hardcode_libdir_flag_spec\"
2 eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
2 eval flag=\"$hardcode_libdir_flag_spec\"
2 eval "(exit $my_status); $my_fail_exp"
2 elif test -n "$runpath_var"; then
2 echo "*** because I did check the linker path looking for a file starting"
2 droppeddeps=yes
2 deplibs="$tmp_deplibs"
2 deplibs+=" $arg"
2 compiler_flags+=" $arg"
2 command="$base_compile $qsrcfile $pic_flag"
2 case $prev in
2 case $file in
2 case $arg in
2 case " $predeps $postdeps " in
2 but it should contain:
2 build_old_libs=no
2 build_libtool_libs=module
2 backslashes++;
2 backslashes = 0;
2 args=$func_stripname_result
2 arg_mode=normal
2 arg=$func_stripname_result
2 add_shlibpath="$dir"
2 add_dir="-L$dir"
2 add="$dir/$linklib"
2 _LTECHO_EOF'
2 ]*|*]*|"")
2 [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
2 [\\/]* | [A-Za-z]:[\\/]*) ;;
2 This mode accepts the following additional options:
2 RM is the name of the program to use to delete files associated with each FILE
2 DUALCASE=1; export DUALCASE # for MKS sh
2 BIN_SH=xpg4; export BIN_SH # for Tru64
2 /* #elif defined (other platforms) ... */
2 *-*-darwin*)
2 *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
2 *** ERROR, $lockfile contains:
2 *) new_libs+=" $deplib" ;;
2 *) abs=`pwd`"/$lib" ;;
2 *" -L$path/$objdir "*) ;;
2 *" $lib "*) ;;
2 *" $a_deplib "*)
2 (typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
2 $progname: and run autoconf again.
2 $progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
2 $progname: Version mismatch error. This is $PACKAGE $VERSION, but the
2 $opt_dry_run || {
2 $ECHO "*** Warning: linker path does not have real file for library $a_deplib."
2 #ifdef __cplusplus
2 #ifdef _MSC_VER
2 #elif defined(__CYGWIN__)
2 #############################################
2 ## ----------- ##
2 # with nonzero status (FALSE) otherwise.
2 # same distribution terms that you use for the rest of that program.
2 # not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
2 # name of the DLL associated with the specified
2 # metacharacters that are still active within double-quoted strings.
2 # it depends on a number of variable set therein.
2 # is built using GNU Libtool, you may include this file under the
2 # into the resulting binary.
2 # in func_to_host_file_result.
2 # import library ARG.
2 # ifdef __STRICT_ANSI__
2 # if you distribute this file as part of a program or library that
2 # define stat _stat
2 # define setmode _setmode
2 # define putenv _putenv
2 # define getcwd _getcwd
2 # define chmod _chmod
2 # define LT_DLSYM_CONST
2 # define FOPEN_WB "wb"
2 # conversion to w32 is not available inside the cwrapper. Returns result in
2 # along with GNU Libtool; see the file COPYING. If not, a copy
2 # You should have received a copy of the GNU General Public License
2 # Unless opt_silent is true, then output CMD. Then, if opt_dryrun is
2 # True iff FILE is a libtool `.la' library or `.lo' object file.
2 # This predicate returns with zero status (TRUE) if
2 # Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
2 # Sed substitution that helps us do robust quoting. It backslashifies
2 # Returns result in func_to_host_file_result.
2 # Result is available in the variable
2 # Restore the uninstalled library and exit
2 # Replace the output file specification.
2 # Please DO NOT delete this file!
2 # Platform-specific function to extract the
2 # Must ONLY be called from within func_mode_link because
2 # It is necessary for linking the library.
2 # Invoked by eval'ing the libtool variable
2 # In each case, ARG is the path to be converted from $build to $host format.
2 # If the user specified any rpath flags, then add them.
2 # Figure out destination file name, if it wasn't already specified.
2 # Echo program name prefixed message to standard error, followed by
2 # Don't build PIC code
2 # Do a test to see if this is really a libtool program.
2 # Be Bourne compatible
2 # As a special exception to the GNU General Public License,
2 # Add any objects from preloaded convenience libraries
2 # A function that is used when there is no print builtin or printf.
2 # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
2 # $sharedlib_from_linklib_result
2 # $sharedlib_from_linklib_cmd
2 test -n "$hardcode_libdirs"; then
2 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
2 xdir="$func_dirname_result"
2 while test "$loop" -ne 0; do
2 while :; do
2 versuffix=".$current"
2 versuffix="$major.$age.$revision"
2 tmp_pathspec = 0;
2 tmp_len = strlen (tmp);
2 struct stat st;
2 strcpy (concat_name + tmp_len + 1, wrapper);
2 setopt NO_GLOB_SUBST
2 save_oldobjs=$oldobjs
2 return rval;
2 relink_command=
2 progdir=\"\$thisdir/$objdir\"
2 prefer_static_libs=yes
2 postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
2 oldobjs=
2 objlist=
2 newdeplibs+=" $a_deplib"
2 name=$func_stripname_result
2 memcpy (concat_name, tmp, tmp_len);
2 match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
2 major=$func_arith_result
2 linker_flags+=" $qarg"
2 libobjs+=" $pic_object"
2 if test -z "$pic_flag" && test -n "$link_static_flag"; then
2 if test -z "$libdir"; then
2 if test -n "$hardcode_libdir_separator"; then
2 if test -n "$exclude_expsyms"; then
2 if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
2 if test "$pass" = conv; then
2 if test "$linkmode,$pass" = "prog,link"; then
2 if test "$linkmode" = lib; then
2 if (name && *name && value && *value)
2 if (getcwd (tmp, LT_PATHMAX) == NULL)
2 if (check_executable (concat_name))
2 if ((!path) || (!*path))
2 func_to_tool_file "$output"
2 func_to_tool_file "$1" func_convert_file_msys_to_w32
2 func_stripname '' '.la' "$outputname"
2 func_source $dir/$name
2 func_source "$wrapper"
2 func_show_eval '${RM}r "$gentop"'
2 func_fatal_error "\`$lib' is not a valid libtool archive"
2 func_fatal_configuration "can not build a shared library"
2 func_extract_archives $gentop $dlprefiles
2 func_execute_cmds "$postlink_cmds" 'exit $?'
2 func_dirname "$arg" "/" ""
2 func_basename "$file"
2 for potent_lib in $potential_libs; do
2 for l in $old_library $library_names; do
2 for a_deplib in $deplibs; do
2 for (s = string; *s != '\0'; s++)
2 finalize_command+=" $qarg"
2 file="$progdir/$program"
2 eval 'cat <<_LTECHO_EOF
2 eval "func_echo $func_quote_for_expand_result"
2 esac # linkmode
2 emulate sh
2 echo >> "$output_objdir/$my_dlsyms" "\
2 done # Gone through all deplibs.
2 destfile="$func_basename_result"
2 destfile="$destdir/$destname"
2 destfile="$destdir/$destfile"
2 deplibs="$lib $deplibs"
2 deplibs="$deplib $deplibs"
2 concat_name[tmp_len] = '/';
2 concat_name =
2 concat_cmds=
2 compiler_flags+=" $qarg"
2 compile_command+=" $qarg"
2 cmds=$old_archive_cmds
2 char *p;
2 case $tagname in
2 case $linkmode in
2 case $file in
2 case $4 in
2 case "$finalize_rpath " in
2 case " $new_libs " in
2 backslashes = 0;
2 absdir=`cd "$dir" && pwd`
2 a_deplib=""
2 XFREE (target_name);
2 XFREE (concat_name);
2 XFREE (actual_cwrapper_name);
2 NULLCMD=:
2 ::) dllsearchpath=$testbindir;;
2 *p = '\0';
2 *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
2 *-*-sco3.2v5* | *-*-sco5v6*)
2 *-*-rhapsody* | *-*-darwin1.[012])
2 *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
2 *) new_libs+=" $deplib" ;;
2 *) finalize_rpath+=" $libdir" ;;
2 *) dllsearchpath+=":$testbindir";;
2 *":$testbindir:"*) ;;
2 *" -L$path/$objdir "*)
2 *" $deplib "*) ;;
2 'error=$?; $opt_dry_run || $RM $removelist; exit $error'
2 $ECHO "*** with $libname and none of the candidates passed a file format test"
2 # is contrary to our usage. Disable this feature.
2 # We should set the runpath_var.
2 # Transform arg to wrapped name.
2 # Read the .lo file
2 # Prepend the subdirectory the object is found in.
2 # Extract subdirectory from the argument.
2 # Add in all the interfaces that we are compatible with.
2 continue
2 xdir="$func_dirname_result"
2 tmp_libs+=" $deplib"
2 test -n "$prev" && \
2 save_libobjs=$libobjs
2 save_ifs="$IFS"; IFS='~'
2 rpath=
2 rpath+="$dir:"
2 rpath+=" $flag"
2 revision="$number_minor"
2 return concat_name;
2 potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
2 notinst_path+=" $abs_ladir"
2 newlib_search_path+=" $func_resolve_sysroot_result"
2 newdlprefiles=
2 newdlfiles=
2 newdeplibs+=" $i"
2 newdependency_libs="$deplib $newdependency_libs"
2 newdependency_libs=
2 new_libs+=" -L$path/$objdir" ;;
2 my_fail_exp="${2-:}"
2 my_cmd="$1"
2 lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
2 loop=$func_arith_result
2 libtool_install_magic="$magic"
2 libobjs+=" $pic_object"
2 libname=`eval "\\$ECHO \"$libname_spec\""`
2 iface=$func_arith_result
2 if test -z "$hardcode_libdirs"; then
2 if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
2 if test "$prev" = dlprefiles; then
2 if test "$prev" = dlfiles; then
2 if test "$lock_old_archive_extraction" = yes; then
2 if test "$linkmode,$pass" = "prog,link"; then
2 if test "$linkmode" = lib ; then
2 if func_ltwrapper_executable_p "$file"; then
2 if ${opt_dry_run-false}; then :; else
2 func_to_tool_file "$output"
2 func_to_host_path_result="$func_cygpath_result"
2 func_to_host_file_result="$func_cygpath_result"
2 func_stripname '-L' '' "$deplib"
2 func_infer_tag $base_compile
2 func_error "Continuing, but uninstalled executables may not work."
2 func_convert_path_front_back_pathsep ":*" "*:" : "$1"
2 func_convert_path_check : : \
2 func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
2 func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
2 func_convert_core_msys_to_w32 "$1"
2 func_convert_core_file_wine_to_w32 "$1"
2 func_basename_result="${1##*/}"
2 func_arith $number_major + $number_minor
2 func_arith $loop - 1
2 for lib in $dlprefiles; do
2 for lib in $dlfiles; do
2 for i in $deplibs; do
2 for file in $files; do
2 for deplib in $dependency_libs; do
2 finalize_deplibs="$deplib $finalize_deplibs"
2 files=
2 eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
2 eval flag=\"$hardcode_libdir_flag_spec\"
2 echo "*** you link to this library. But I can only do this if you have a"
2 echo "*** I have the capability to make that library automatically link in when"
2 droppeddeps=yes
2 dlprefiles="$newdlprefiles"
2 dlfiles="$newdlfiles"
2 dir="$ladir"
2 deplibs="$dir/$old_library $deplibs"
2 deplibs=
2 deplibs+=" System.ltframework"
2 delfiles+=" $output"
2 current=$func_arith_result
2 compile_deplibs="$deplib $compile_deplibs"
2 case $output in
2 case $linkmode in
2 case $libobj in
2 case $host in
2 case $a_deplib in
2 case "$xrpath " in
2 age="$number_minor"
2 add_shlibpath=
2 add_dir=
2 absdir="$abs_ladir"
2 *cygwin* | *mingw* | *cegcc* )
2 *" $libdir "*) ;;
2 *" $dir "*) ;;
2 *" $absdir "*) ;;
2 * ) new_inherited_linker_flags+=" $deplib" ;;
2 ${opt_silent-false} || {
2 # than running their programs.
2 # search path.
2 # This variable tells wrapper scripts just to set variables rather
2 # Skip directories that are in the system default run-time
2 # Remove this search path later
2 # Prepend the subdirectory the object is found in.
2 # Hardcode the library path.
2 # Do not include libc due to us having libc/libc_r.
2 # Compiler inserts libc in the correct place for threads to work
2 # Causes problems with __ctype
2 test "$build_libtool_libs" = no; then
2 progpath="$progdir/$progname"
2 while :; do
2 until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
2 then
2 test -n "$xrpath" && \
2 test -n "$rpath" && \
2 test -n "$add_dir" && deplibs="$add_dir $deplibs"
2 test -n "$add" && deplibs="$add $deplibs"
2 test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
2 test "$#" -gt 1 && \
2 rpath=
2 relink_command=
2 prev=
2 pre_post_deps=
2 pic_mode=default
2 path=
2 old_library=
2 notinst_deplibs+=" $lib"
2 newdeplibs+=" $i"
2 new_libs=
2 name=$func_stripname_result
2 name="$func_basename_result"
2 my_status=$?
2 lt_setenv (name, new_value);
2 lt_debugprintf (__FILE__, __LINE__,
2 len=$len0
2 if test -n \"\$lt_option_debug\"; then
2 if test -n "$runpath_var"; then
2 if test -n "$last_robj"; then
2 if test -n "$hardcode_libdir_separator" &&
2 if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
2 if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
2 if test "$need_locks" = warn &&
2 if test "$my_status" -eq 0; then :; else
2 if test "$build_old_libs" = no; then
2 if test "$build_libtool_libs" = yes; then
2 if (check_executable (concat_name))
2 if (c == '\\')
2 if (c == '"')
2 hardcode_libdirs="$libdir"
2 hardcode_libdirs=
2 func_verbose "creating $output"
2 func_to_tool_file "$obj"
2 func_stripname -l '' "$a_deplib"
2 func_stripname '' '.exe' "$file"
2 func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
2 func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
2 func_quote_for_expand "$my_cmd"
2 func_quote_for_eval "$arg"
2 func_ltwrapper_scriptname "$file"
2 func_help noexit
2 func_basename "$file"
2 for path in $notinst_path; do
2 for opt_mode in compile link execute install finish uninstall clean; do
2 for libdir in $libdirs; do
2 export_dynamic=yes
2 eval "func_echo $func_quote_for_expand_result"
2 echo "----------------------------------------------------------------------"
2 dlself=yes
2 dlself=needless
2 continue
2 char c = *s;
2 char *new_value = lt_extend_str (getenv (name), value, 0);
2 cat <<"EOF"
2 case $i in
2 case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
2 case $deplib in
2 case "$finalize_rpath " in
2 case "$compile_rpath " in
2 case " $deplibs" in
2 build_libtool_libs=no
2 break;
2 allow_undefined=yes
2 add_dir="-L$libdir"
2 XFREE (new_value);
2 XFREE (concat_name);
2 IFS="$save_ifs"
2 -R*)
2 -L*)
2 --help)
2 *\ -l* | *\ -L*)
2 *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \
2 */*) func_dirname_result="${1%/*}${2}" ;;
2 *.$libext)
2 *) finalize_rpath+=" $libdir" ;;
2 *) compile_rpath+=" $absdir" ;;
2 *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
2 *" $deplib "*) specialdeplibs+=" $deplib" ;;
2 *" $absdir "*) ;;
2 * ) func_dirname_result="${3}" ;;
2 $ECHO "$func_to_tool_file_result" >> $output
2 # move library search paths that coincide with paths to not yet
2 # installed libraries to the beginning of the library search list
2 # in scan sets, so we specify it separately.
2 # Substitute the hardcoded libdirs into the rpath.
2 # Now set the variables for building old libraries.
2 # Many Bourne shells cannot handle close brackets correctly
2 # Just accumulate the unique libdirs.
2 # Double-quote args containing shell metacharacters to delay
2 # Add a -L argument.
2 tmpdir=`func_mktempdir`
2 test -z "$libdir" && \
2 newdlprefiles+=" $dir/$old_library"
2 newdlprefiles+=" $dir/$linklib"
2 func_quote_for_eval "$arg"
2 func_lt_dump_args \${1+\"\$@\"} 1>&2
2 for lib in $libs; do
2 else
2 cat >&2 <<_LT_EOF
2 break
2 $opt_dry_run || {
2 # that they are being used correctly in the link pass.
2 # Keep a list of preopened convenience libraries to check
2 wrappers_required=no
2 func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
2 func_quote_for_eval "$flag"
2 fi
2 dlpreconveniencelibs+=" $dir/$old_library"
2 cat <<"EOF"
2 nonempty (path));
1 } while (0)
1 } lt_dlsymlist;
1 } # Extended-shell func_xform implementation
1 } # Extended-shell func_stripname implementation
1 } # Extended-shell func_split_short_opt implementation
1 } # Extended-shell func_split_long_opt implementation
1 } # Extended-shell func_lo2o implementation
1 } # Extended-shell func_len implementation
1 } # Extended-shell func_dirname_and_basename implementation
1 } # Extended-shell func_dirname implementation
1 } # Extended-shell func_basename implementation
1 } # Extended-shell func_arith implementation
1 } # Extended-shell func_append_quoted implementation
1 } # Extended-shell func_append implementation
1 || func_fatal_help "\`$file' is not a file"
1 { test "$opt_mode" = uninstall || test "$opt_mode" = clean; } &&
1 { test "$opt_mode" = link || test "$opt_mode" = relink; } &&
1 xstrdup (const char *string)
1 xmalloc (size_t num)
1 xdir="$func_dirname_result"
1 xcompiler)
1 xcclinker)
1 with_gnu_ld="yes"
1 with_gcc=yes
1 with it are deleted. Otherwise, only FILE itself is deleted using RM."
1 whole_archive_flag_spec="\${wl}--whole-archive\$convenience \${wl}--no-whole-archive"
1 weak_library_names='$weak_libs'
1 want_nocaseglob="no"
1 volatile const char * MAGIC_EXE = "$magic_exe";
1 void lt_update_lib_path (const char *name, const char *value);
1 void lt_update_exe_path (const char *name, const char *value);
1 void lt_setenv (const char *name, const char *value);
1 void lt_fatal (const char *file, int line, const char *message, ...);
1 void lt_dump_script (FILE* f)
1 void lt_dump_script (FILE *f);
1 void lt_debugprintf (const char *file, int line, const char *fmt, ...);
1 void *xmalloc (size_t num);
1 vinfo_number=yes
1 versuffix_save=$versuffix
1 versuffix=$versuffix_save
1 versuffix="-$major"
1 versuffix=""
1 versuffix=
1 verstring=
1 version_type=windows
1 variables_saved_for_relink="PATH PATH LD_RUN_PATH GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
1 using \`ar' and \`ranlib', or on Windows using \`lib'.
1 use_static_libs=$prefer_static_libs
1 uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
1 typedef struct {
1 treated as uninstalled libtool libraries, other files are standard or library
1 to_tool_file_cmd=func_convert_file_msys_to_w32
1 to_host_path_cmd=
1 to_host_file_cmd=func_convert_file_msys_to_w32
1 tmp_deplibs=
1 thread_safe=yes
1 the \`--dry-run' option if you just want to see what would be executed."
1 test_compile)
1 test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP`
1 test -z "$opt_mode" && {
1 test -z "$exec_cmd" && \
1 test -n "$vinfo" && \
1 test -n "$removelist" && \
1 test -n "$release" && \
1 test -n "$old_library" && staticlibs+=" $dir/$old_library"
1 test -n "$objs$old_deplibs" && \
1 test -n "$destfile" && \
1 test -n "$7" && \
1 test "X$libobjs" = "X " && libobjs=
1 test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'}
1 test "$want_nocaseglob" = yes && nocaseglob=`shopt -p nocaseglob`
1 test "$opt_mode" = install && func_mode_install ${1+"$@"}
1 test "$opt_mode" = finish && func_mode_finish ${1+"$@"}
1 test "$opt_mode" = execute && func_mode_execute ${1+"$@"}
1 test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
1 test "$module" = no && \
1 tempremovelist=`$ECHO "$output_objdir/*"`
1 temp_xrpath=
1 tdlname=../bin/$dlname
1 tdlname=$func_relative_path_result$dlname
1 taglist="$taglist $tagname"
1 sys_lib_search_path_spec="c:/mingw/lib/gcc/mingw32/4.6.2 c:/mingw/lib/gcc c:/mingw/mingw32/lib c:/mingw/lib /mingw/lib "
1 sys_lib_dlsearch_path_spec="/lib /usr/lib"
1 symtab_cflags=
1 symfileobj="$output_objdir/${my_outputname}S.$objext"
1 suppress_output=' >/dev/null 2>&1'
1 stripped_ext=""
1 stripme=" -s"
1 striplib="strip --strip-unneeded"
1 strendzap (char *str, const char *pat)
1 staticlibs+=" $file"
1 static void
1 static int lt_debug = 1;
1 static int lt_debug = 0;
1 static const void *lt_preloaded_setup() {
1 static const char *nonnull (const char *s);
1 static const char *nonempty (const char *s);
1 static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX;
1 static const char *dumpscript_opt = LTWRAPPER_OPTION_PREFIX "dump-script";
1 static const char *debug_opt = LTWRAPPER_OPTION_PREFIX "debug";
1 soname_spec="\${libname}\`echo \${release} | \$SED -e s/[.]/-/g\`\${versuffix}\${shared_ext}"
1 solaris2.[6789]|solaris2.1[0-9])
1 skipped_export=:
1 single_module="${wl}-multi_module"
1 shrext_cmds=".dll"
1 shouldnotlink=no
1 shouldnotlink=$module
1 shlibpath_var=PATH
1 shlibpath_overrides_runpath=yes
1 shlibpath="$finalize_shlibpath"
1 shift; break ;;
1 sharedlib_from_linklib_cmd="func_cygming_dll_for_implib"
1 set dummy --mode finish ${1+"$@"}; shift
1 set dummy $vinfo 0 0 0
1 set dummy $library_names; shift
1 set dummy $library_names
1 set dummy "$opt" ${1+"$@"};
1 set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"}
1 set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"}
1 sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
1 sed_quote_subst='$sed_quote_subst'
1 sed_make_literal_regex='s,[].[^$\\*\/],\\&,g'
1 sed_double_backslash="\
1 save_output=$output
1 save_libobjs=$libobjs
1 save_ifs="$IFS"; IFS='~'
1 save_ifs="$IFS"; IFS=':'
1 save_deplibs="$deplibs"
1 s@/\./@/@g
1 s/\$with_gnu_ld/'"$with_gnu_ld"'/
1 s/\$progname/'$progname'/
1 s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/
1 s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/
1 s,/\.$,/,'
1 s*\$progname*'$progname'*
1 s*\$host*'"$host"'*
1 s*\$SHELL*'"$SHELL"'*
1 s*\$LTCFLAGS*'"$LTCFLAGS"'*
1 s*\$LTCC*'"$LTCC"'*
1 s*\$LD*'"$LD"'*
1 runpath_var=LD_RUN_PATH
1 rpath | xrpath)
1 revision=$revision
1 required, except when creating a convenience library.
1 removelist=$lockfile
1 removelist=
1 removedotparts=':dotsl
1 reload_objs="$libobjs $reload_conv_objs"
1 reload_flag=" -r"
1 reload_cmds="\$LD\$reload_flag -o \$output\$reload_objs"
1 relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
1 relink_command=\"$relink_command\""
1 relink_command=\"$relink_command\"
1 relink_command="(cd `pwd`; $relink_command)"
1 relink_command="$finalize_var$finalize_command$finalize_rpath"
1 release_save=$release
1 release=$release_save
1 release=""
1 realname="$1"
1 progpath="$0"
1 progname=$func_basename_result
1 prev=xrpath
1 prev=xlinker
1 prev=xcclinker
1 prev=shrext
1 prev=rpath
1 prev=release
1 prev=precious_regex
1 prev=objectlist
1 prev=inst_prefix
1 prev=framework
1 prev=dlfiles
1 prev=bindir
1 preserve_args=
1 preserve_args+=" $opt $optarg"
1 prepare_spawn (char **argv)
1 prelink_cmds=""
1 precious_regex)
1 potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
1 postuninstall_cmds="dldll=\\\`\$SHELL 2>&1 -c '. \$file; echo \\\$dlname'\\\`~
1 postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
1 postlink_cmds=""
1 postinstall_cmds="base_file=\\\`basename \\\${file}\\\`~
1 pic_object=$write_lobj
1 pic_object=
1 pic_mode=yes
1 pic_mode=no
1 pic_mode=default
1 pic_flag_for_symtable=
1 pic_flag=" -DDLL_EXPORT -DPIC"
1 pathcdr='s,^/[^/]*,,'
1 pathcar='s,^/\([^/]*\).*$,\1,'
1 passes="conv scan dlopen dlpreopen link"
1 passes="conv dlpreopen link"
1 package_revision=1.3294
1 output_la=$func_basename_result
1 output=${output_objdir}/${output_la}.nm
1 output=$save_output
1 output="$libobj"
1 orig_export_symbols=
1 opt_warning=:
1 opt_tag="$optarg"
1 opt_quiet=false
1 opt_preserve_dup_deps=false
1 opt_preserve_dup_deps=:
1 opt_mode="$optarg"
1 opt_help_all=false
1 opt_help_all=:
1 opt_help=:
1 opt_help=': help-all'
1 opt_finish=false
1 opt_finish=:
1 opt_features=false
1 opt_features=:
1 opt_dry_run=:
1 opt_dlopen="${opt_dlopen+$opt_dlopen
1 opt_debug=:
1 opt_debug='set -x'
1 opt_config=false
1 opt_config=:
1 only library objects (\`.lo' files) may be specified, and \`-rpath' is
1 oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP`
1 oldobjs="$libobjs_save $symfileobj"
1 oldobjs+=" $func_extract_archives_result"
1 oldlibs="$output_objdir/$libname.$libext"
1 oldlibs+=" $output_objdir/$libname.$libext"
1 old_striplib="strip --strip-debug"
1 old_postuninstall_cmds=""
1 old_postinstall_cmds="chmod 644 \$oldlib~\$RANLIB \$oldlib"
1 old_library='$old_library'
1 old_deplibs+=" $arg"
1 old_archive_from_new_cmds=""
1 old_archive_from_expsyms_cmds=""
1 old_archive_cmds="\$AR \$AR_FLAGS \$oldlib\$oldobjs~\$RANLIB \$oldlib"
1 odir="$objdir"
1 odir="$dir/$objdir"
1 objs+=" $arg"
1 objectlist)
1 object files.
1 objdir=.libs
1 obj=$func_lo2o_result
1 obj="$output"
1 o2lo="s/\\.${objext}\$/.lo/"
1 nonnull (const char *s)
1 nonempty (const char *s)
1 none | unknown | *)
1 non_pic_object=$write_oldobj
1 non_pic_object=
1 no_undefined_flag=""
1 no_builtin_flag=" -fno-builtin"
1 no/*-*-irix* | /*-*-irix*)
1 nm_file_list_spec="@"
1 nlist="$output_objdir/${my_outputname}.nm"
1 newobj=lt$counter-$objbase
1 newdlprefiles=
1 newdlprefiles+=" ${lt_sysroot:+=}$libdir/$name"
1 newdlfiles=
1 newdlfiles+=" ${lt_sysroot:+=}$libdir/$name"
1 newdeplibs=
1 newdeplibs+=" $a_deplib"
1 newdependency_libs+=" -R$func_replace_sysroot_result"
1 newdependency_libs+=" -L$func_replace_sysroot_result"
1 newdependency_libs+=" ${lt_sysroot:+=}$libdir/$name"
1 new_argv[i] = xstrdup ("\"\"");
1 new_argv[i] = (char *) string;
1 need_version=no
1 need_locks="no"
1 need_lib_prefix=no
1 name_save=$name
1 name=$name_save
1 my_dlsyms="${my_outputname}S.c"
1 my_arg=`$ECHO "$1" | $SED \
1 module_expsym_cmds=""
1 module_cmds=""
1 module=yes
1 max_cmd_len=8192
1 make_executable (const char *path)
1 major_save=$major
1 major=$major_save
1 major=$func_arith_result
1 main (int argc, char *argv[])
1 magic_exe="%%%MAGIC EXE variable%%%"
1 magic="%%%MAGIC variable%%%"
1 macro_version=2.4
1 macro_revision=1.3294
1 lt_user_locale=
1 lt_update_lib_path (const char *name, const char *value)
1 lt_update_exe_path (const char *name, const char *value)
1 lt_unset=unset
1 lt_sysroot=
1 lt_setenv (const char *name, const char *value)
1 lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
1 lt_safe_locale=
1 lt_option_debug=
1 lt_fatal (const char *file, int line, const char *message, ...)
1 lt_extend_str (const char *orig_value, const char *add, int to_end)
1 lt_exit=$?
1 lt_error_core (int exit_status, const char *file,
1 lt_debugprintf (const char *file, int line, const char *fmt, ...)
1 lt_${my_prefix}_LTX_preloaded_symbols[];
1 lt_${my_prefix}_LTX_preloaded_symbols[] =
1 lock_old_archive_extraction=no
1 lo2o="s/\\.lo\$/.${objext}/"
1 link|lin|li|l)
1 linknames=
1 link_static_flag="-static"
1 link_static=no # Whether the deplib will be linked statically
1 link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
1 link_command="$compile_command$compile_rpath"
1 link_all_deplibs=unknown
1 link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
1 libs="$dlprefiles"
1 libs="$deplibs"
1 library_names_spec="\$libname.dll.a"
1 library_names='$library_names'
1 library object suffix, \`.lo'."
1 libobjs=$save_libobjs
1 libobjs=$nm_file_list_spec$func_to_tool_file_result
1 libobj=$output
1 libobj="$func_basename_result"
1 libobj="$arg"
1 libname_spec="lib\$name"
1 libname_save=$libname
1 libname=$libname_save
1 libdirs+=" $opt"
1 libdir=LIBDIR
1 libdir='$install_libdir'"
1 libdir=$func_replace_sysroot_result
1 lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"`
1 lib="$output_objdir/$realname"
1 length += backslashes + 1;
1 len=$func_len_result
1 len=$func_arith_result
1 lastarg="$arg"
1 laname="$func_basename_result"
1 ladir="$func_dirname_result"
1 is created, otherwise an executable program is created."
1 irix | nonstopux)
1 into their corresponding uninstalled binary, and any of their required library
1 int setenv (const char *, const char *, int);
1 int putenv (char *);
1 int make_executable (const char *path);
1 int check_executable (const char *path);
1 int _putenv (const char *);
1 instname="$dir/$name"i
1 install|instal|insta|inst|ins|in|i)
1 installed=yes
1 installed=$installed
1 install_shared_prog+=" -m $func_quote_for_eval_result"
1 install_override_mode=""
1 inst_prefix)
1 inherited_linker_flags='$new_inherited_linker_flags'
1 inherited_linker_flags=
1 inherit_rpath=no
1 include_expsyms=""
1 if test \"\$libtool_install_magic\" = \"$magic\"; then
1 if test -z "$vinfo" && test -n "$release"; then
1 if test -z "$tagname"; then
1 if test -z "$pic_object" ||
1 if test -z "$old_library" ; then
1 if test -z "$linklib"; then
1 if test -z "$libdir"; then
1 if test -z "$hardcode_libdirs"; then
1 if test -z "$func_stripname_result"; then
1 if test -z "$export_symbols"; then
1 if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
1 if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
1 if test -n "$whole_archive_flag_spec"; then
1 if test -n "$soname_spec"; then
1 if test -n "$shlibpath"; then
1 if test -n "$rpath"; then
1 if test -n "$relink_command"; then
1 if test -n "$prev"; then
1 if test -n "$perm_rpath"; then
1 if test -n "$old_library" &&
1 if test -n "$link_static_flag"; then
1 if test -n "$library_names" &&
1 if test -n "$inst_prefix_dir"; then
1 if test -n "$inherited_linker_flags"; then
1 if test -n "$finish_eval"; then
1 if test -n "$finish_cmds"; then
1 if test -n "$finalize_perm_rpath"; then
1 if test -n "$file_magic_glob"; then
1 if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
1 if test -n "$exec_cmd"; then
1 if test -n "$dllsearchpath"; then
1 if test -n "$delfiles"; then
1 if test -n "$convenience"; then
1 if test -n "$1"; then
1 if test -f "$output_objdir/${outputname}S.${objext}"; then
1 if test -f "$dir/$objdir/$dlname"; then
1 if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then
1 if test "X$skipped_export" != "X:" &&
1 if test "X$objlist" = X ||
1 if test "X$installed" = Xyes; then
1 if test "X$destdir" = "X$libdir"; then
1 if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
1 if test "X$arg" = "X-export-symbols"; then
1 if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
1 if test "$use_static_libs" = built && test "$installed" = yes; then
1 if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
1 if test "$tagname" = CXX ; then
1 if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
1 if test "$search_ext" = ".la"; then
1 if test "$prev" = dlfiles; then
1 if test "$pic_object" != none; then
1 if test "$pass" = dlpreopen; then
1 if test "$pass" = dlopen; then
1 if test "$pass" = conv; then
1 if test "$pass" != conv; then
1 if test "$opt_mode" = clean ; then
1 if test "$non_pic_object" != none; then
1 if test "$need_lib_prefix" != no; then
1 if test "$module" = yes || test "$export_dynamic" = yes; then
1 if test "$module" = yes && test -n "$module_cmds" ; then
1 if test "$linkmode,$pass" = "prog,link"; then
1 if test "$linkmode,$pass" = "lib,link" ||
1 if test "$linkmode,$pass" != "prog,link"; then
1 if test "$linkmode" = prog && test "$pass" != link; then
1 if test "$linkmode" = lib; then
1 if test "$linkmode" = "prog"; then
1 if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
1 if test "$hardcode_into_libs" = yes; then
1 if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
1 if test "$found" = yes || test -f "$lib"; then :
1 if test "$fast_install" = yes; then
1 if test "$fast_install" != no; then
1 if test "$droppeddeps" = yes; then
1 if test "$dlself" = yes; then
1 if test "$deplibs_check_method" != pass_all; then
1 if test "$build_old_libs" = yes; then
1 if test "$build_libtool_libs" = yes; then
1 if test "$build_libtool_libs" = module; then
1 if test "$avoid_version" = yes && test "$need_version" = no; then
1 if test "$allow_undefined" = yes; then
1 if test "$age" -gt "$current"; then
1 if func_ltwrapper_script_p "$wrapper"; then
1 if func_ltwrapper_script_p "$file"; then
1 if func_lalib_unsafe_p "$opt"; then
1 if func_lalib_unsafe_p "$arg"; then
1 if func_lalib_p "$lib"; then
1 if eval test -z \"\${$var+set}\"; then
1 if (for obj in $oldobjs
1 if (IS_PATH_SEPARATOR (*q))
1 if $opt_help; then
1 if $opt_dry_run; then
1 if $install_cp; then :; else
1 if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
1 if $GREP "^installed=no" $deplib > /dev/null; then
1 host_os=mingw32msvc
1 host_alias=i586-mingw32msvc
1 host=i586-pc-mingw32msvc
1 help="Try \`$progname --help' for more information." ## default
1 has_slash = 1;
1 hardcode_shlibpath_var=unsupported
1 hardcode_minus_L=no
1 hardcode_libdir_separator=""
1 hardcode_libdir_flag_spec_ld=""
1 hardcode_libdir_flag_spec="-L\$libdir"
1 hardcode_into_libs=no
1 hardcode_direct_absolute=no
1 hardcode_direct=no
1 hardcode_automatic=no
1 hardcode_action=immediate
1 global_symbol_to_cdecl="sed -n -e 's/^T .* \\(.*\\)\$/extern int \\1();/p' -e 's/^[ABCDGIRSTW]* .* \\(.*\\)\$/extern char \\1;/p'"
1 global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \\([^ ]*\\)[ ]*\$/ {\\\"\\1\\\", (void *) 0},/p' -e 's/^[ABCDGIRSTW]* \\([^ ]*\\) \\(lib[^ ]*\\)\$/ {\"\\2\", (void *) \\&\\2},/p' -e 's/^[ABCDGIRSTW]* \\([^ ]*\\) \\([^ ]*\\)\$/ {\"lib\\2\", (void *) \\&\\2},/p'"
1 global_symbol_to_c_name_address="sed -n -e 's/^: \\([^ ]*\\)[ ]*\$/ {\\\"\\1\\\", (void *) 0},/p' -e 's/^[ABCDGIRSTW]* \\([^ ]*\\) \\([^ ]*\\)\$/ {\"\\2\", (void *) \\&\\2},/p'"
1 global_symbol_pipe="sed -n -e 's/^.*[
1 gentop="$output_objdir/${outputname}x"
1 generated+=" $gentop"
1 func_xform ()
1 func_write_libtool_object ()
1 func_win32_libid ()
1 func_win32_import_lib_p ()
1 func_warning ()
1 func_warning "this platform does not like uninstalled shared libraries"
1 func_warning "ignoring multiple \`-rpath's for a libtool library"
1 func_warning "\`-version-info/-version-number' is ignored for archives"
1 func_warning "\`-version-info' is ignored for programs"
1 func_warning "\`-version-info' is ignored for objects"
1 func_warning "\`-rpath' is ignored for objects"
1 func_warning "\`-rpath' is ignored for archives"
1 func_warning "\`-release' is ignored for programs"
1 func_warning "\`-release' is ignored for objects"
1 func_warning "\`-release' is ignored for archives"
1 func_warning "\`-l' and \`-L' are ignored for objects" ;;
1 func_warning "\`-l' and \`-L' are ignored for archives" ;;
1 func_warning "\`-export-symbols' is ignored for archives"
1 func_warning "\`-dlopen' is ignored for objects"
1 func_warning "\`-dlopen' is ignored for non-libtool libraries and objects"
1 func_warning "\`-dlopen' is ignored for archives"
1 func_warning "\`-dlopen self' is ignored for libtool libraries"
1 func_warning "\`-R' is ignored for objects"
1 func_warning "\`-R' is ignored for archives"
1 func_warning "\`$output' will be relinked during installation"
1 func_version ()
1 func_version
1 func_verbose ()
1 func_verbose "using reloadable object file for export list..."
1 func_verbose "creating $output_objdir/$my_dlsyms"
1 func_verbose "creating $NM input file list: $output"
1 func_verbose "Extracting $my_xabs"
1 func_usage ()
1 func_usage
1 func_tr_sh ()
1 func_to_tool_file ()
1 func_to_tool_file "$output_objdir/$outputname"
1 func_to_tool_file "$output"
1 func_to_host_path ()
1 func_to_host_file ()
1 func_stripname -R '' "$deplib"
1 func_stripname -L '' "$deplib"
1 func_stripname ()
1 func_stripname 'lib' '.la' "$outputname"
1 func_stripname 'lib' '.la' "$laname"
1 func_stripname '-Wl,' '' "$arg"
1 func_stripname '-Wc,' '' "$arg"
1 func_stripname '-R' '' "$arg"
1 func_stripname "-L" '' "$arg"
1 func_split_short_opt ()
1 func_split_short_opt "$opt"
1 func_split_long_opt ()
1 func_split_long_opt "$opt"
1 func_source ()
1 func_source "$lib"
1 func_source "$func_resolve_sysroot_result" ;;
1 func_source "$arg"
1 func_show_eval_locale ()
1 func_show_eval ()
1 func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'
1 func_show_eval '${RM}r "$gentop"'
1 func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"'
1 func_show_eval '$MV "$output_obj" "$obj"' \
1 func_show_eval '$MV "$output_obj" "$lobj"' \
1 func_show_eval "rmdir $dir >/dev/null 2>&1"
1 func_show_eval "$old_striplib $oldlib" 'exit $?'
1 func_show_eval "$link_command" 'exit_status=$?'
1 func_show_eval "$link_command" 'exit $?'
1 func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?'
1 func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
1 func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
1 func_resolve_sysroot ()
1 func_resolve_sysroot "$func_stripname_result"
1 func_resolve_sysroot "$arg"
1 func_replace_sysroot ()
1 func_replace_sysroot "$libdir"
1 func_relative_path ()
1 func_relative_path "$install_libdir" "$bindir"
1 func_quote_for_expand ()
1 func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;;
1 func_quote_for_eval ()
1 func_quote_for_eval "$install_override_mode"
1 func_quote_for_eval "$arg2"
1 func_parse_lt_options ()
1 func_normal_abspath ()
1 func_mode_uninstall ()
1 func_mode_link ()
1 func_mode_install ()
1 func_mode_help ()
1 func_mode_finish ()
1 func_mode_execute ()
1 func_mode_compile ()
1 func_mktempdir ()
1 func_mkdir_p ()
1 func_missing_arg ()
1 func_ltwrapper_scriptname ()
1 func_ltwrapper_script_p ()
1 func_ltwrapper_p ()
1 func_ltwrapper_executable_p ()
1 func_lt_dump_args ()
1 func_lo2o ()
1 func_lo2o "$libobj"
1 func_len ()
1 func_len " $obj"
1 func_len " $cmds"
1 func_lalib_unsafe_p ()
1 func_lalib_unsafe_p "$lib" \
1 func_lalib_p ()
1 func_init_to_host_path_cmd ()
1 func_infer_tag ()
1 func_help ()
1 func_grep ()
1 func_generate_dlsyms ()
1 func_features ()
1 func_features
1 func_fatal_help ()
1 func_fatal_help "you must specify a destination"
1 func_fatal_help "unrecognized option \`$opt'" ;;
1 func_fatal_help "no file or destination specified"
1 func_fatal_help "\`$dest' is not a directory"
1 func_fatal_error ()
1 func_fatal_error "unknown suffix for \`$my_dlsyms'"
1 func_fatal_error "invalid argument \`$opt'"
1 func_fatal_error "\`-allow-undefined' must not be used because it is the default"
1 func_fatal_configuration ()
1 func_extract_archives ()
1 func_extract_archives $gentop $addlibs
1 func_extract_an_archive ()
1 func_execute_cmds ()
1 func_execute_cmds "$reload_cmds" 'exit $?'
1 func_execute_cmds "$prelink_cmds" 'exit $?'
1 func_execute_cmds "$postlink_cmds" 'exit $?'
1 func_exec_program_core ()
1 func_exec_program ()
1 func_error ()
1 func_error "not configured to extract global symbols from dlpreopened files"
1 func_error "ignoring unknown tag $tagname"
1 func_enable_tag ()
1 func_enable_tag "$optarg"
1 func_emit_wrapper_arg1=${1-no}
1 func_emit_wrapper no > $func_ltwrapper_scriptname_result
1 func_emit_wrapper ()
1 func_emit_exe_manifest ()
1 func_emit_cwrapperexe_src ()
1 func_echo_all ()
1 func_echo ()
1 func_echo "enabling shell trace mode"
1 func_dirname_and_basename ()
1 func_dirname_and_basename "$progpath"
1 func_dirname ()
1 func_dirname "$lib" "" "."
1 func_dirname "$file" "/" ""
1 func_dirname "$arg" "/" ""
1 func_cygpath ()
1 func_cygming_ms_implib_p ()
1 func_cygming_gnu_implib_p ()
1 func_cygming_dll_for_implib_fallback_core ()
1 func_cygming_dll_for_implib_fallback ()
1 func_cygming_dll_for_implib ()
1 func_convert_path_noop ()
1 func_convert_path_nix_to_w32 ()
1 func_convert_path_nix_to_cygwin ()
1 func_convert_path_msys_to_w32 ()
1 func_convert_path_msys_to_cygwin ()
1 func_convert_path_front_back_pathsep ()
1 func_convert_path_cygwin_to_w32 ()
1 func_convert_path_check ()
1 func_convert_file_noop ()
1 func_convert_file_nix_to_w32 ()
1 func_convert_file_nix_to_cygwin ()
1 func_convert_file_msys_to_w32 ()
1 func_convert_file_msys_to_cygwin ()
1 func_convert_file_cygwin_to_w32 ()
1 func_convert_file_check ()
1 func_convert_core_path_wine_to_w32 ()
1 func_convert_core_msys_to_w32 ()
1 func_convert_core_file_wine_to_w32 ()
1 func_config ()
1 func_config
1 func_check_version_match ()
1 func_basename ()
1 func_basename "$srcfile"
1 func_basename "$output"
1 func_basename "$file$stripped_ext"
1 func_basename "$file"
1 func_basename "$deplib"
1 func_arith ()
1 func_arith $len + $func_len_result
1 func_arith $counter + 1
1 func_append_quoted CC_quoted "$arg"
1 func_append_quoted ()
1 func_append ()
1 from the given SOURCEFILE.
1 freebsd-elf)
1 freebsd-aout)
1 framework)
1 for z in $available_tags; do
1 for var in $vars dependency_libs; do
1 for var in $variables_saved_for_relink; do
1 for test_deplib in $deplibs; do
1 for pre_post_dep in $predeps $postdeps; do
1 for p in $tempremovelist; do
1 for obj in $save_libobjs; do
1 for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
1 for linkname in $linknames; do
1 for libdir in $xrpath; do
1 for libdir in $rpath $xrpath; do
1 for lib in $dlprefiles; do
1 for lalib_p_l in 1 2 3 4
1 for installed in no yes; do
1 for file in $dlfiles $dlprefiles; do
1 for dlprefile in $dlprefiles; do
1 for deplib in $save_deplibs; do
1 for deplib in $deplibs; do
1 for cmd in $cmds; do
1 for arg in $LTCFLAGS; do
1 finish|finis|fini|fin|fi|f)
1 finish_eval=""
1 finish_cmds=""
1 find_executable (const char *wrapper)
1 finalslash='s,/*$,/,'
1 finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'`
1 finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
1 finalize_deplibs=
1 finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
1 finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
1 files+=" $dest"
1 file_magic_glob=""
1 file_magic_cmd="func_win32_libid"
1 file_magic*)
1 file_list_spec=""
1 file="$func_basename_result"
1 fi # linkmode = lib
1 fi # link shared/static library?
1 fi # $pass = dlpreopen
1 fi # $pass = dlopen
1 fi # $pass = conv
1 fi # $linkmode = prog...
1 fi # $installed = yes
1 fast_install=no
1 fast_install=needless
1 extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
1 extracted_serial=0
1 extracted_archives=
1 extract_expsyms_cmds=""
1 extern \"C\" {
1 extern LT_DLSYM_CONST lt_dlsymlist
1 expsyms_regex)
1 export_symbols_cmds="\$NM \$libobjs \$convenience | \$global_symbol_pipe | \$SED -e '/^[BCDGRS][ ]/s/.*[ ]\\\\([^ ]*\\\\)/\\\\1 DATA/;s/^.*[ ]__nm__\\\\([^ ]*\\\\)[ ][^ ]*/\\\\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //' | sort | uniq > \$export_symbols"
1 export_dynamic_flag_spec="\${wl}--export-all-symbols"
1 export_dynamic=yes
1 export LANGUAGE LC_ALL
1 exit_status=1
1 exit_status=0
1 exit_status=$EXIT_SUCCESS
1 exit_cmd=:
1 exit $lt_exit
1 execute|execut|execu|exec|exe|ex|e)
1 exec 0<&5 5<&-
1 exclude_expsyms="[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname"
1 eval library_names=\"$library_names_spec\"
1 eval libname=\"$libname_spec\"
1 eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
1 eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
1 eval cmds=\"$old_archive_cmds\"
1 eval cmd=\"$cmd1\"
1 eval "if test \"\${save_$lt_var+set}\" = set; then
1 eval "export $shlibpath_var"
1 eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
1 eval "$shlibpath_var=\"\$dir\""
1 eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
1 eval "$extractedcf"
1 esac # case $deplib
1 esac # case $arg
1 elif test -n "$archiver_list_spec"; then
1 elif test "X$arg" = "X-lc_r"; then
1 elif test "$prev" = dlprefiles; then
1 elif test "$linkmode" = prog; then
1 elif test "$build_libtool_libs" = yes; then
1 elif func_ltwrapper_executable_p "$file"; then
1 elif eval var_value=\$$var; test -z "$var_value"; then
1 either the \`install' or \`cp' program.
1 echo "export $shlibpath_var"
1 echo "*** that it is just a static archive that I should not use here."
1 echo "*** not find such a program. So, this module is probably useless."
1 echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
1 echo "*** because the file extensions .$libext of this argument makes me believe"
1 echo "*** \`nm' from GNU binutils and a full rebuild may help."
1 echo "*** However, this would only work if libtool was able to extract symbol"
1 echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
1 echo " - add LIBDIR to the \`$shlibpath_var' environment variable"
1 echo " - add LIBDIR to the \`$runpath_var' environment variable"
1 echo " during linking"
1 echo " during execution"
1 echo " setmode(1,_O_BINARY);"
1 droppeddeps=no
1 double_quote_subst='s/\(["`\\]\)/\\\1/g'
1 done > "$output"
1 done # for var
1 dollar='\$'
1 dlpreopen='$dlprefiles'
1 dlpreopen=
1 dlpreopen) libs="$dlprefiles" ;;
1 dlopen_support=unknown
1 dlopen_self_static=unknown
1 dlopen_self=unknown
1 dlopen='$dlfiles'
1 dlopen) libs="$dlfiles" ;;
1 dlname='$tdlname'
1 dlfiles|dlprefiles)
1 dlfiles+=" $pic_object"
1 dirname="s,/[^/]*$,,"
1 directories are added to the library path.
1 dir=$func_stripname_result
1 dir=$func_resolve_sysroot_result
1 dir=$func_dirname_result
1 dir+="$objdir"
1 deplibs_check_method="file_magic ^x86 archive import|^x86 DLL"
1 deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"`
1 deplibs=$newdeplibs
1 deplibs="$deplib $deplibs"
1 dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"`
1 dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
1 dependency_libs='$dependency_libs'
1 dep_rpath+=" $flag"
1 delfiles+=" $output"
1 cygwin* | mingw* | cegcc*)
1 current=$current
1 create an executable program.
1 counter=$func_arith_result
1 const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */
1 const char *base_name (const char *name);
1 const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */
1 const char * TARGET_PROGRAM_NAME = "$outputname"; /* hopefully, no .exe */
1 const char * LIB_PATH_VARNAME = "$shlibpath_var";
1 const char * LIB_PATH_VALUE = "$func_to_host_path_result";
1 const char * LIB_PATH_VALUE = "";
1 const char * EXE_PATH_VARNAME = "PATH";
1 const char * EXE_PATH_VARNAME = "";
1 const char * EXE_PATH_VALUE = "$func_to_host_path_result";
1 const char * EXE_PATH_VALUE = "";
1 const char *
1 compile|compil|compi|comp|com|co|c)
1 compiler_needs_object="no"
1 compiler_c_o="yes"
1 compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'`
1 compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
1 compile_deplibs=
1 compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
1 compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
1 compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
1 command="$base_compile $qsrcfile$pie_flag"
1 command="$base_compile $qsrcfile"
1 command+=" -o $obj"
1 command+=" -o $lobj"
1 collapseslashes='s@/\{1,\}@/@g'
1 cmds=$old_archive_from_new_cmds
1 clean|clea|cle|cl)
1 check_executable (const char *path)
1 chase_symlinks (const char *pathspec)
1 char *xstrdup (const char *string);
1 char *strendzap (char *str, const char *pat);
1 char *realpath (const char *, char *);
1 char *lt_extend_str (const char *orig_value, const char *add, int to_end);
1 char *find_executable (const char *wrapper);
1 char *chase_symlinks (const char *pathspec);
1 char **prepare_spawn (char **argv);
1 case :$finalize_shlibpath: in
1 case $with_gcc/$host in
1 case $vinfo_number in
1 case $version_type in
1 case $revision in
1 case $progpath in
1 case $potliblink in
1 case $pass in
1 case $output_name in
1 case $output in
1 case $optarg in
1 case $libdir in
1 case $ladir in
1 case $install_prog,$host in
1 case $host_os in
1 case $destfile in
1 case $deplibs_check_method in
1 case $current in
1 case $age in
1 case $1 in
1 case "$xrpath " in
1 case "$libs " in
1 case "$dlprefiles " in
1 case "$deplibs " in
1 case "$compile_command " in
1 case " $rmdirs " in
1 case " $predeps $postdeps $compiler_lib_search_path " in
1 case " $oldobjs " in
1 case " $dlprefiles $dlfiles " in
1 build_os=mingw32
1 build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
1 build_libtool_need_lc=yes
1 build_libtool_libs=yes
1 build_alias=
1 build=i686-pc-mingw32
1 bs4='\\\\\\\\'
1 bs2='\\\\'
1 basename="s,^.*/,,"
1 base_name (const char *name)
1 avoidtemprpath=
1 avoid_version=yes
1 available_tags=""
1 archiver_list_spec="@"
1 archive_expsym_cmds="if test \\\"x\\\`\$SED 1q \$export_symbols\\\`\\\" = xEXPORTS; then
1 archive_cmds="\$CC -shared \$libobjs \$deplibs \$compiler_flags -o \$output_objdir/\$soname \${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker \$lib"
1 always_export_symbols=no
1 allow_undefined_flag="unsupported"
1 allow_undefined=no
1 allow_libtool_libs_with_static_runtimes=yes
1 alldeplibs=no
1 addlibs="$old_convenience"
1 addlibs="$convenience"
1 add="$libdir/$linklib"
1 add="$inst_prefix_dir$libdir/$linklib"
1 add="$dir/$old_library"
1 a_deplib=""
1 a program from several object files.
1 \$CC -shared \$output_objdir/\$soname.def \$libobjs \$deplibs \$compiler_flags -o \$output_objdir/\$soname \${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker \$lib"
1 \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
1 [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
1 [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
1 [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
1 [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
1 Xsed="${SED}"' -e 1s/^X//'
1 Xsed="$SED -e 1s/^X//"
1 VERSION=2.4
1 This mode sets the library path environment variable according to \`-dlopen'
1 Then, COMMAND is executed, with ARGS as arguments."
1 The rest of the components are interpreted as arguments to that command (only
1 The output file name is determined by removing the directory component from
1 The following components of LINK-COMMAND are treated specially:
1 The following components of INSTALL-COMMAND are treated specially:
1 The commands that this mode executes may require superuser privileges. Use
1 TIMESTAMP=""
1 STRIP="strip"
1 SP2NL="tr \\040 \\012"
1 SOURCEFILE, then substituting the C source code suffix \`.c' with the
1 SHELL="/bin/sh"
1 SED="/bin/sed"
1 Remove libraries from an installation directory.
1 Remove files from the build directory.
1 RANLIB=$save_RANLIB
1 RANLIB="ranlib"
1 PROGRAM=libtool
1 PACKAGE=libtool
1 Otherwise, only FILE itself is deleted using RM."
1 OTOOL64=""
1 OBJDUMP="objdump"
1 NL2SP="tr \\015\\012 \\040\\040"
1 MANIFEST_TOOL=":"
1 MAGIC_CMD=file
1 Link object files or libraries together to form another library, or to
1 LT_DLSYM_CONST lt_dlsymlist
1 LTCFLAGS="-g -O2 -Wall"
1 LTCC="gcc"
1 LN_S="cp -p"
1 LINK-COMMAND is a command using the C compiler that you would use to create
1 LD="c:/mingw/mingw32/bin/ld.exe"
1 LANGUAGE=C
1 Install executables or libraries.
1 If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
1 If any of the ARGS are libtool executable wrappers, then they are translated
1 If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
1 If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
1 If FILE is a libtool library, object or program, all the files associated
1 If FILE is a libtool library, all the files associated with it are deleted.
1 INSTALL-COMMAND is the installation command. The first component should be
1 IFS="$save_mkdir_p_IFS"
1 GREP="/bin/grep"
1 FGREP="/bin/grep -F"
1 Every other argument is treated as a filename. Files ending in \`.la' are
1 Each LIBDIR is a directory that contains libtool libraries.
1 EXIT_SUCCESS=0
1 EXIT_SKIP=77
1 EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing.
1 EXIT_FAILURE=1
1 EGREP="/bin/grep -E"
1 ECHO="printf %s\\n"
1 DSYMUTIL=""
1 DLLTOOL="dlltool"
1 Complete the installation of libtool libraries.
1 Compile a source file into a libtool library object.
1 COMPILE-COMMAND is a command to be used in creating a \`standard' object file
1 BSD-compatible install options are recognized)."
1 Automatically set library path, then run a program.
1 All other options (arguments beginning with \`-') are ignored.
1 AR_FLAGS="cru"
1 <assembly xmlns="urn:schemas-microsoft-com:asm.v1" manifestVersion="1.0">
1 <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
1 </assembly>
1 : ${Xsed="$SED -e 1s/^X//"}
1 : ${SHELL="${CONFIG_SHELL-/bin/sh}"}
1 : ${SED="/bin/sed"}
1 : ${RM="rm -f"}
1 : ${MV="mv -f"}
1 : ${MKDIR="mkdir"}
1 : ${MAKE="make"}
1 : ${LN_S="cp -p"}
1 : ${GREP="/bin/grep"}
1 : ${FGREP="/bin/grep -F"}
1 : ${EGREP="/bin/grep -E"}
1 : ${CP="cp -f"}
1 /^# '$PROGRAM' (GNU /,/# warranty; / {
1 /* portability defines, excluding path handling macros */
1 /* path handling portability macros */
1 /* declarations of non-ANSI functions */
1 /* This works around a problem in FreeBSD linker */
1 /* This system does not cope well with relocations in const data. */
1 /* The mapping between symbol names and symbols. */
1 /* Searches for the full path of the wrapper. Returns
1 /* Prepares an argument vector before calling spawn().
1 /* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
1 /* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */
1 /* External symbol declarations for the compiler. */\
1 /* DATA imports from DLLs on WIN32 con't be const, because runtime
1 /* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */
1 /* $cwrappersource - temporary wrapper executable for $objdir/$outputname
1 . "./$1" ;;
1 -static-libtool-libs)
1 -shared | -static | -prefer-pic | -prefer-non-pic)
1 -pie | -fpie | -fPIE)
1 -no-suppress)
1 -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
1 -all-static)
1 -Xcompiler)
1 *~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*)
1 *str = '\0';
1 *p++ = '\\';
1 *cygwin*) func_stripname '' '.exe' "$output"
1 *cygwin* | *mingw*)
1 *cygwin* | *mingw* | *cegcc* )
1 *[\ /]"$newobj "*) ;;
1 */usr/bin/install*,*cygwin*)
1 *.ltframework)
1 *.lo | *.$objext)
1 *.$objext)
1 *.$libext)
1 *-*-sunos*) add_shlibpath="$dir" ;;
1 *-*-rhapsody* | *-*-darwin1.[012])
1 *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*)
1 *** ERROR, $lockfile exists and contains:
1 *) xrpath+=" $dir" ;;
1 *) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";;
1 *) no_install=yes ;;
1 *) new_libs="$deplib $new_libs" ;;
1 *) my_xabs=`pwd`"/$my_xlib" ;;
1 *) if test ! -f "$gentop/$newobj"; then break; fi ;;
1 *) finalize_shlibpath+="$libdir:" ;;
1 *) dlprefiles+=" $lib" ;;
1 *) dlfiles+=" $lib" ;;
1 *) deplibs+=" $qarg.ltframework" # this is fixed later
1 *) break ;;
1 *":$libdir:"*) ;;
1 *" -static "*) ;;
1 *" -L$dir "* | *" $arg "*)
1 *" $qarg.ltframework "*) ;;
1 *" $my_xlib_u "*)
1 *" $dir "*) ;;
1 *" $deplib "*) specialdeplibs+=" $deplib" ;;
1 *" $deplib "*) ;;
1 (unset CDPATH) >/dev/null 2>&1 && unset CDPATH
1 (GNU libtool) 2.4
1 (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
1 '"$cmd"'"'
1 && test "$dlopen_self_static" = unknown && \
1 && test "$dlopen_self" = unknown \
1 && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })"
1 %DEPLIBS%)
1 $progname: of $PACKAGE $VERSION and run autoconf again.
1 $progname: definition of this LT_INIT comes from an older release.
1 $progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
1 $progname: but the definition of this LT_INIT comes from revision $macro_revision.
1 $progname: You should recreate aclocal.m4 with macros from revision $package_revision
1 $progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision,
1 $opt_help || {
1 $opt_dry_run || if test -n "$outputname"; then
1 $opt_dry_run || $RM conftest
1 $opt_dry_run || $RM $output
1 $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
1 $opt_debug
1 $lt_unset CDPATH
1 $lt_unset $lt_var
1 $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result
1 $automake_version
1 $autoconf_version
1 $SED -n -e '
1 $RM \"\$progdir/\$file\"
1 $MV "${realname}U" "$realname" )
1 $LD (gnu? $with_gnu_ld)
1 $ECHO \"\$relink_command_output\" >&2
1 $ECHO "*** static library $deplib is not portable!"
1 $ECHO "*** Warning: lib $linklib is a module, not a shared library"
1 $ECHO "*** Warning: Trying to link with static lib archive $deplib."
1 $ECHO "*** Warning: Linking the shared library $output against the"
1 $ECHO " - use the \`$flag' linker flag"
1 $ECHO " - have your system administrator run these commands:$admincmds"
1 $ECHO " $libdir"
1 #pragma GCC diagnostic ignored \"-Wstrict-prototypes\"
1 #include <sys/stat.h>
1 #include <string.h>
1 #include <stdlib.h>
1 #include <stdio.h>
1 #include <stdarg.h>
1 #include <malloc.h>
1 #include <fcntl.h>
1 #include <errno.h>
1 #include <ctype.h>
1 #include <assert.h>
1 #ifndef _O_BINARY
1 #ifndef S_IXOTH
1 #ifndef S_IXGRP
1 #ifndef S_ISLNK
1 #ifndef PATH_SEPARATOR_2
1 #ifndef FOPEN_WB
1 #ifndef DIR_SEPARATOR_2
1 #ifndef DIR_SEPARATOR
1 #ifdef HAVE_SETENV
1 #ifdef FREEBSD_WORKAROUND
1 #if defined(__MINGW32__)
1 #if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4))
1 #if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
1 #if defined(_MSC_VER)
1 #if defined(PATH_MAX)
1 #if defined(LT_DEBUGWRAPPER)
1 #if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
1 #endif /* PATH_SEPARATOR_2 */
1 #endif /* DIR_SEPARATOR_2 */
1 #end: func_cygpath
1 #end: func_convert_core_msys_to_w32
1 #else /* PATH_SEPARATOR_2 */
1 #else /* DIR_SEPARATOR_2 */
1 #elif defined(__osf__)
1 #elif defined(__MINGW32__)
1 #elif defined(MAXPATHLEN)
1 #define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type)))
1 #define XFREE(stale) do { \
1 #define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
1 #define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
1 #define LTWRAPPER_OPTION_PREFIX "--lt-"
1 ## FIXME: Find the place where the list is rebuilt in the wrong
1 ## Main. ##
1 ## order, and fix it there properly
1 #! /bin/sh
1 # wrapper executable. Must ONLY be called from within
1 # would be equivalent was wrong. It would break on at least
1 # without needing to append a separator.
1 # windows platforms, and (c) all begin with the string "--lt-"
1 # win32 will think the script is a binary if it has
1 # will break.
1 # will be execed at the end. This prevents here-documents from being
1 # will assume that the directory in which it is stored is
1 # which contains forward slashes, into one that contains
1 # which are still active within double quotes backslashified.
1 # whether the shell understands "unset".
1 # where, for any given $build/$host combination the 'X_to_Y' value is the
1 # when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2)
1 # was found and let the user know that the "--tag" command
1 # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
1 # variables after splitting SHORTOPT after the 2nd character.
1 # variables after splitting LONGOPT at the `=' sign.
1 # variable will take. If 'yes', then the emitted script
1 # variable here.
1 # uses $file to determine the appropriate filename for a
1 # unless 'noexit' is passed as argument.
1 # turn spaces into newlines.
1 # turn newlines into spaces.
1 # to shlibpath, because on Windows, both are PATH and uninstalled
1 # to runtime path list.
1 # to make the code below a bit more comprehensible
1 # to be aesthetically quoted because they are evaled later.
1 # to avoid creating archives with duplicate basenames if we
1 # time on that platform, so we default to a shared-only configuration.
1 # those functions but instead duplicate the functionality here.
1 # this retains compatibility with .la files and attempts
1 # this pattern).
1 # them. This is particularly important on AIX, because we don't
1 # the user asked for that or because the platform doesn't support
1 # the two new functions must follow this pattern, or func_init_to_host_path_cmd
1 # the libtool wrapper, (b) are identical between the wrapper
1 # the library:
1 # the entirety of a libtool archive into another (currently
1 # the _XPG environment variable is not equal to 1 (one), the special
1 # the License, or (at your option) any later version.
1 # the Free Software Foundation; either version 2 of the License, or
1 # the $objdir directory. This is a cygwin/mingw-specific
1 # that is supplied when $file_magic_command is called.
1 # test for cygwin because mv fails w/o .exe extensions
1 # temporary ltwrapper_script.
1 # support having both static and shared libraries enabled at the same
1 # strip PREFIX and SUFFIX off of NAME.
1 # string literally.
1 # store the result into func_replace_sysroot_result.
1 # static archive out of a convenience library, or when linking
1 # specified import library.
1 # slash if non-empty, suitable for immediately appending a filename
1 # since we can't tell whether shared libraries were disabled because
1 # sh-indentation:2
1 # set to false by a later but shorter cmd.
1 # set therein.
1 # script's $0 value, followed by "$@".
1 # script to make things like `--version' happen as quickly as we can.
1 # same. If conversion functions are added for new $build/$host combinations,
1 # return the library type of file 'arg'
1 # result in func_to_tool_file_result. If the conversion in use is listed
1 # result in func_convert_core_msys_to_w32_result.
1 # restored at link time.
1 # resorting to external programs. To this end, it redirects stdin and
1 # remove .exe since cygwin /usr/bin/install will append another
1 # release should show up in the -l (ie -lgmp5) so we don't want to
1 # release of libtool.
1 # quotes we have to do it in 2 steps:
1 # published by the Free Software Foundation; either version 2 of
1 # positional parameter $0, within a function call, is the name of the
1 # platform-specific function to extract the name of the
1 # perform func_basename and func_dirname in a single function
1 # overlaps.
1 # otherwise set result to NONDIR_REPLACEMENT.
1 # or path in func_cygpath_result (input file name or path is assumed to be in
1 # or obtained by writing to the Free Software Foundation, Inc.,
1 # one anyway
1 # on the platform and compiler that created the implib.
1 # obtained by writing to the Free Software Foundation, Inc.,
1 # not supported by libtool).
1 # not shown.
1 # not in the set a-zA-Z0-9_ are replaced with '_'. Further,
1 # name if it has been set yet.
1 # modify it under the terms of the GNU General Public License as
1 # mode:shell-script
1 # might have to extract them afterwards, e.g., when creating a
1 # may have been created when compiling PIC objects.
1 # manifest files must have executable permission regardless).
1 # make stdout use "unix" line endings
1 # list incase some portion of path contains whitespace.
1 # line option must be used.
1 # libtool processes, and avoids race conditions if possible. If
1 # libtool - Provide generalized library-building support services.
1 # libtool (GNU libtool) 2.4
1 # library is relocated.
1 # libraries that it depends on are installed.
1 # libraries must come first.
1 # left over by shells.
1 # ldd/readelf like tool for Mach-O binaries on Mac OS X.
1 # ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4.
1 # launches target application with the remaining arguments.
1 # it will not redefine variables installed, or shouldnotlink
1 # it under the terms of the GNU General Public License as published by
1 # it an absolute path.
1 # is ksh but when the shell is invoked as "sh" and the current value of
1 # is given, then evaluate it. Use the saved locale for evaluation.
1 # is given, then evaluate it.
1 # is double-quoted, suitable for a subsequent eval, whereas
1 # invoked via `$to_host_path_cmd ARG'
1 # invoked via `$to_host_file_cmd ARG'
1 # into the library and all subsequent libraries and executables linked
1 # incorporate the script contents within a cygwin/mingw
1 # include the following information:
1 # include <unistd.h>
1 # include <stdint.h>
1 # include <process.h>
1 # include <io.h>
1 # include <direct.h>
1 # in which we disable both kinds of libraries. Given conflicting
1 # in input to double_quote_subst, that '$' was protected from expansion.
1 # in func_to_host_path_result.
1 # in a wine environment, working winepath, and LT_CYGPATH set. Returns result
1 # in (the comma separated) LAZY, no conversion takes place.
1 # in $build's $PATH.
1 # ifndef _INTPTR_T_DEFINED
1 # ifndef PATH_SEPARATOR_2
1 # ifndef DIR_SEPARATOR_2
1 # ifdef __CYGWIN__
1 # if one wasn't chosen via the "--tag" command line option.
1 # if CDPATH is set.
1 # if $1 begins with a digit, a '_' is prepended as well.
1 # given, STRING is the basename for that directory.
1 # generates a relative path from SRCDIR to DSTDIR, with a trailing
1 # function.
1 # func_xform libobj-or-source
1 # func_write_libtool_object output_name pic_name nonpic_name
1 # func_win32_libid arg
1 # func_win32_import_lib_p ARG
1 # func_warning arg...
1 # func_version
1 # func_verbose arg...
1 # func_usage
1 # func_tr_sh
1 # func_to_tool_file ARG LAZY
1 # func_to_host_path_result.
1 # func_to_host_path ARG
1 # func_to_host_file_result to a simplistic fallback value (see below).
1 # func_to_host_file_result to ARG1).
1 # func_to_host_file ARG
1 # func_stripname prefix suffix name
1 # func_strip_suffix prefix name
1 # func_split_short_opt shortopt
1 # func_split_long_opt longopt
1 # func_source file
1 # func_show_eval_locale cmd [fail_exp]
1 # func_show_eval cmd [fail_exp]
1 # func_resolve_sysroot_result
1 # func_resolve_sysroot PATH
1 # func_replace_sysroot PATH
1 # func_relative_path SRCDIR DSTDIR
1 # func_quote_for_expand arg
1 # func_quote_for_eval arg
1 # func_normal_abspath PATH
1 # func_mode_uninstall arg...
1 # func_mode_link because it depends on a number of variables
1 # func_mode_link arg...
1 # func_mode_install arg...
1 # func_mode_finish arg...
1 # func_mode_execute arg...
1 # func_mode_compile arg...
1 # func_mktempdir [string]
1 # func_mkdir_p directory-path
1 # func_missing_arg argname
1 # func_ltwrapper_scriptname file
1 # func_ltwrapper_script_p file
1 # func_ltwrapper_p file
1 # func_ltwrapper_executable_p file
1 # func_lo2o object
1 # func_len string
1 # func_lalib_unsafe_p file
1 # func_lalib_p file
1 # func_init_to_host_path_cmd
1 # func_infer_tag arg
1 # func_help [NOEXIT]
1 # func_grep expression filename
1 # func_generate_dlsyms outputname originator pic_p
1 # func_features
1 # func_fatal_help arg...
1 # func_fatal_error arg...
1 # func_fatal_configuration arg...
1 # func_extract_archives gentop oldlib ...
1 # func_extract_an_archive dir oldlib
1 # func_execute_cmds commands fail_cmd
1 # func_error arg...
1 # func_enable_tag tagname
1 # func_emit_wrapper [arg=no]
1 # func_emit_exe_manifest
1 # func_emit_cwrapperexe_src
1 # func_echo_all arg...
1 # func_echo arg...
1 # func_dirname_and_basename file append nondir_replacement
1 # func_dirname file append nondir_replacement
1 # func_cygpath ARGS...
1 # func_cygming_ms_implib_p ARG
1 # func_cygming_gnu_implib_p ARG
1 # func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs
1 # func_cygming_dll_for_implib_fallback ARG
1 # func_cygming_dll_for_implib ARG
1 # func_convert_path_noop ARG
1 # func_convert_path_nix_to_w32 ARG
1 # func_convert_path_nix_to_cygwin ARG
1 # func_convert_path_msys_to_w32 ARG
1 # func_convert_path_msys_to_cygwin ARG
1 # func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG
1 # func_convert_path_cygwin_to_w32 ARG
1 # func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH
1 # func_convert_file_noop ARG
1 # func_convert_file_nix_to_w32 ARG
1 # func_convert_file_nix_to_cygwin ARG
1 # func_convert_file_msys_to_w32 ARG
1 # func_convert_file_msys_to_cygwin ARG
1 # func_convert_file_cygwin_to_w32 ARG
1 # func_convert_file_check ARG1 ARG2
1 # func_convert_core_path_wine_to_w32 ARG
1 # func_convert_core_msys_to_w32 ARG
1 # func_convert_core_file_wine_to_w32 ARG
1 # func_config
1 # func_check_version_match
1 # func_basename file
1 # func_arith arithmetic-term...
1 # func_append_quoted var value
1 # func_append var value
1 # from $build's *nix or MSYS format). In case (3), returns the w32 file name
1 # four `\'s followed by two `\'s and then a '$'. `\' that '$'.
1 # format in TO_PATH. Otherwise, emit an error message, but continue, resetting
1 # format in ARG2. Otherwise, emit an error message, but continue (resetting
1 # fixup the dll searchpath if we need to.
1 # file name or path is assumed to be in w32 format, as previously converted
1 # fatal anyway. Works if `file' does not exist.
1 # exit_cmd.
1 # eventual linking with the app. that links it) if we
1 # environment variable; do not put it in $PATH.
1 # end: func_emit_cwrapperexe_src
1 # end: func_convert_core_path_wine_to_w32
1 # end: func_convert_core_file_wine_to_w32
1 # end func_to_tool_file
1 # end func_to_host_path
1 # end func_to_host_file
1 # end func_convert_path_noop
1 # end func_convert_path_nix_to_w32
1 # end func_convert_path_nix_to_cygwin
1 # end func_convert_path_msys_to_w32
1 # end func_convert_path_msys_to_cygwin
1 # end func_convert_path_front_back_pathsep
1 # end func_convert_path_cygwin_to_w32
1 # end func_convert_path_check
1 # end func_convert_file_noop
1 # end func_convert_file_nix_to_w32
1 # end func_convert_file_nix_to_cygwin
1 # end func_convert_file_msys_to_w32
1 # end func_convert_file_msys_to_cygwin
1 # end func_convert_file_cygwin_to_w32
1 # end func_convert_file_check
1 # enable the TAGNAME tag. We also add TAGNAME to the global $taglist
1 # emit the source code for a wrapper executable on stdout
1 # emit a Win32 UAC manifest for executable on stdout
1 # during linking. This must work even if $libdir does not exist.
1 # dot (in which case that matches only a dot).
1 # does not support the --identify-strict option.
1 # do not "continue". Instead, add this to base_compile
1 # didn't have a PIC flag, but the assumption that the effects
1 # didn't already link the preopened objects directly into
1 # define _O_BINARY 0
1 # define _CRT_SECURE_NO_DEPRECATE 1
1 # define S_IXUSR _S_IEXEC
1 # define S_IXOTH 0
1 # define S_IXGRP 0
1 # define PATH_SEPARATOR ':'
1 # define LT_PATHMAX PATH_MAX
1 # define LT_PATHMAX MAXPATHLEN
1 # define LT_PATHMAX 1024
1 # define LT_DLSYM_CONST const
1 # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
1 # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
1 # define IS_DIR_SEPARATOR(ch) \
1 # define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
1 # define HAVE_SETENV
1 # define HAVE_DOS_BASED_FILE_SYSTEM
1 # define FOPEN_WB "w"
1 # define DIR_SEPARATOR '/'
1 # correctly configured wine environment available, with the winepath program
1 # converts the file name ARG from $build format to toolchain format. Return
1 # converted to $host format) on output.
1 # convert absolute version numbers to libtool ages
1 # convert $build files to toolchain format.
1 # convert $build file names to $host format.
1 # configured wine environment available, with the winepath program in $build's
1 # configuration. But we'll never go from static-only to shared-only.
1 # command doesn't match the default compiler.
1 # closes it afterwards, without saving the original file descriptor.
1 # choices, we go for a static library, that is the most portable,
1 # characters, hashes, percent signs, but SUFFIX may contain a leading
1 # can be downloaded from http://www.gnu.org/licenses/gpl.html, or
1 # can be downloaded from http://www.gnu.org/licenses/gpl.html,
1 # by a space.
1 # but don't create it if we're doing a dry run.
1 # but do not quote variable references.
1 # but WITHOUT ANY WARRANTY; without even the implied warranty of
1 # behavior.
1 # behavior happens only for exec(3), not for open(2)! Also, sourcing
1 # because it is most likely a libtool script we actually want to
1 # be empty on error (or when ARG is empty)
1 # be converted.
1 # arg is usually of the form 'gcc ...'
1 # are convertible, then the result may be empty.
1 # appropriate value, based on the value of $to_host_file_cmd.
1 # and the sed script, to avoid splitting on whitespace, but
1 # and func_basename. For efficiency, we do not delegate to
1 # and cancel out any ".." path components in PATH after making
1 # and appending REPL if ORIG matches BACKPAT.
1 # and a working winepath. Returns result in func_to_host_file_result.
1 # and $host is mingw, cygwin, or some other w32 environment. Relies on a
1 # also don't use non-portable quotes within backquotes within
1 # against it.
1 # add it in twice. Is that correct?
1 # accidentally link it into a program.
1 # a working winepath. Returns result in func_to_host_file_result.
1 # a wine environment, working winepath, and LT_CYGPATH set. Returns result in
1 # a shared archive.
1 # a help hint, and exit.
1 # a dlpreopen symbol table.
1 # a configuration failure hint, and exit.
1 # a .exe suffix, so we strip it off here.
1 # `\'-ed in input to the same. If an odd number of `\' preceded a '$'
1 # `FILE.' does not work on cygwin managed mounts.
1 # `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that.
1 # Written by Gordon Matzigkeit <[email protected]>, 1996
1 # Wrapper around calling the cygpath program via LT_CYGPATH. This is used when
1 # Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
1 # Which release of libtool.m4 was used?
1 # Whether we should hardcode library paths into libraries.
1 # Whether we need soft or hard links.
1 # Whether we need a single "-rpath" flag with a separated argument.
1 # Whether we are building with GNU ld or not.
1 # Whether to use a lock for old archive extraction.
1 # Whether the compiler copes with passing no objects directly.
1 # Whether or not to optimize for fast installation.
1 # Whether or not to disallow shared libs when runtime libs are static.
1 # Whether or not to build static libraries.
1 # Whether or not to build shared libraries.
1 # Whether or not to add -lc for building shared libraries.
1 # Whether libtool must link a program against all its dependency libraries.
1 # Whether dlopen of statically linked programs is supported.
1 # Whether dlopen of programs is supported.
1 # Whether dlopen is supported.
1 # When reporting a bug, please describe a test case to reproduce it and
1 # What type of objects to build.
1 # What is the maximum length of a command?
1 # We used to do the same as -all-static on platforms that
1 # We have no uninstalled library dependencies, so finalize right now.
1 # We don't need to create a wrapper script.
1 # WITHOUT ANY WARRANTY; without even the implied warranty of
1 # Very basic option parsing. These options are (a) specific to
1 # Version information for $libname.
1 # Verify that TAGNAME is valid, and either flag an error and exit, or
1 # Verify that FROM_PATH (a path in $build format) was converted to $host
1 # Verify that ARG1 (a file name in $build format) was converted to $host
1 # Variables whose values should be saved in libtool wrapper scripts and
1 # Used when --lt-debug. Prints its arguments to stdout
1 # Used to examine libraries when file_magic_cmd begins with "file".
1 # Use standard objects if they are pic
1 # Usage: $progname [OPTION]... [MODE-ARG]...
1 # Unknown arguments in both finalize_command and compile_command need
1 # Unconvertible file (directory) names in ARG are skipped; if no directory names
1 # Turn $1 into a string suitable for a shell variable name.
1 # Try looking first in the location we're being installed to.
1 # Try `$progname --help --mode=MODE' for a more detailed description of MODE.
1 # True iff FILE is a libtool wrapper script or wrapper executable
1 # True iff FILE is a libtool wrapper script
1 # True iff FILE is a libtool wrapper executable
1 # True if ARG is an import lib, as indicated by $file_magic_cmd
1 # Transform the symbol file into the correct name.
1 # Transform the output of nm in a proper C declaration.
1 # Transform the output of nm in a C name address pair.
1 # Transform the output of nm in a C name address pair when lib prefix is needed.
1 # Transform deplibs into only deplibs that can be linked in shared.
1 # Transform all the library objects into standard objects.
1 # Transform .lo files to .o files.
1 # Tool to manipulate fat objects and archives on Mac OS X.
1 # Tool to manipulate archived DWARF debug symbol files on Mac OS X.
1 # Tool to change global to local symbols on Mac OS X.
1 # Time to change all our "foo.ltframework" stuff back to "-framework foo"
1 # This wrapper script should never be moved out of the build directory.
1 # This must work even if $libdir does not exist
1 # This library was specified with -dlpreopen.
1 # This library was specified with -dlopen.
1 # This is free software; see the source for copying conditions. There is NO
1 # This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT
1 # This function implements the same check as func_lalib_p without
1 # This fallback implementation is for use when $DLLTOOL
1 # This environment variable determines our operation mode.
1 # These SED scripts presuppose an absolute path with a trailing slash.
1 # There are only two supported options: --lt-debug and
1 # The root where to search for dependent libraries,and in which our libraries should be installed.
1 # The result will be available in $func_to_host_path_result.
1 # The names of the tagged configurations supported by this script.
1 # The name that we can dlopen(3).
1 # The name of this program:
1 # The name of the static archive.
1 # The name of the directory that contains temporary libtool files.
1 # The linker used to build libraries.
1 # The last name is the one that the linker finds with -lNAME
1 # The is the core of a fallback implementation of a
1 # The host system.
1 # The first argument to this parsing function should be the
1 # The effects of -static are defined in a previous loop.
1 # The effects of -shared are defined in a previous loop.
1 # The commands to list exported symbols.
1 # The commands to extract the exported symbol list from a shared archive.
1 # The command line is too long to execute in one step.
1 # The coded name of the library, if different from the real name.
1 # The build system.
1 # The archiver.
1 # The TAGs below are defined such that we never get into a situation
1 # The HP-UX ksh and POSIX shell print the target directory to stdout
1 # The $output program cannot be directly executed until all the libtool
1 # Take the output of nm and produce a listing of raw symbols and C names.
1 # Symbols that should not be listed in the preloaded symbols.
1 # Symbols that must always be exported.
1 # Strips options in the --lt-* namespace from \$@ and
1 # Standard options:
1 # Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH
1 # Specify filename containing input files.
1 # Specify filename containing input files for $NM.
1 # Source FILE, adding directory component if necessary.
1 # Skip this library if it cannot be dlopened.
1 # Since each input `\' is now two `\'s, look for any number of runs of
1 # Should we warn about portability when linking against -modules?
1 # Shorthand for --mode=foo, only valid as the first argument
1 # Shell to use when invoking shell scripts.
1 # Shared library suffix (normally ".so").
1 # Shared library runtime path variable.
1 # Shared library path variable.
1 # Set to yes if linker adds runtime paths of dependent libraries
1 # Set to "yes" if using the -LDIR flag during linking hardcodes DIR
1 # Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
1 # Set to "yes" if exported symbols are required.
1 # Set to "yes" if building a shared library automatically hardcodes DIR
1 # Set func_split_short_opt_name and func_split_short_opt_arg shell
1 # Set func_split_long_opt_name and func_split_long_opt_arg shell
1 # See the names of the shared library.
1 # Sed that helps us avoid accidentally triggering echo(1) options like -n.
1 # Sed substitution that turns a string into a regex matching for the
1 # Sed substitution that converts a w32 file name or path
1 # Same as above, but do not quote variable references.
1 # STRING may not start with a hyphen.
1 # SECTION_NAME is either .idata$6 or .idata$7, depending
1 # Run-time system search path for libraries.
1 # Result will be available in $func_to_host_file_result.
1 # Result is stored in $func_tr_sh_result. All characters
1 # Result is available in $func_convert_core_path_wine_to_w32_result.
1 # Result is available in $func_convert_core_file_wine_to_w32_result, and will
1 # Report bugs to <[email protected]>.
1 # Replace a leading = in PATH with a sysroot. Store the result into
1 # Remove version info from name if versioning should be avoided
1 # Remove our outputs, but don't remove object files since they
1 # Remove doubled-up and trailing slashes, "." path components,
1 # Read the libtool library.
1 # Read the .lo file
1 # Read the .la file
1 # Re-`\' parameter expansions in output of double_quote_subst that were
1 # Quote VALUE and append to the end of shell variable VAR, separated
1 # Provide generalized library-building support services.
1 # Preserve any variables that may affect compiler behavior
1 # Prepare the list of exported symbols
1 # Possibly a libtool object, so verify it.
1 # Possibly a libtool archive, so verify it.
1 # Place PIC objects in $objdir
1 # Permission mode override for installation of shared libraries.
1 # Path separators are also converted from $build format to $host format. If
1 # Parse the version information argument.
1 # Parse the name list into a source file.
1 # Parse options once, thoroughly. This comes as soon as possible in the
1 # PREFIX and SUFFIX must not contain globbing or regex special
1 # POSIX demands no paths to be encoded in archives. We have
1 # Otherwise fall back on heuristic.
1 # Option defaults:
1 # Only pass preopened files to the pseudo-archive (for
1 # Only do commands if we really have different PIC objects.
1 # Only attempt this if the compiler in the base compile
1 # Only an error if not doing a dry-run.
1 # On Rhapsody replace the C library is the System framework
1 # Old archive suffix (normally "a").
1 # Object file suffix (normally "o").
1 # Now that we've collected a possible --mode arg, show help if necessary
1 # Now compile the dynamic symbol file.
1 # Note that it is not necessary on cygwin/mingw to append a dot to
1 # Non-PIC object.
1 # Need a lot of goo to handle *both* DLLs and import libs
1 # Names of this library.
1 # Names of additional weak libraries provided by this library
1 # Name of the non-PIC object
1 # Name of the PIC object.
1 # NOTE: Changes made to this file will be lost: look at ltmain.sh.
1 # NLS nuisances: We save the old values to restore during execute mode.
1 # Must we lock files when doing compilation?
1 # Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT
1 # Method to check whether dependent libraries are shared objects.
1 # Maybe install the static library, too.
1 # Manifest tool.
1 # Make sure we have an absolute path for reexecution:
1 # Make sure we don't pick an alternate name that also
1 # Make sure the entire path to DIRECTORY-PATH is available.
1 # Make sure IFS has a sensible default
1 # Make a temporary directory that won't clash with other running
1 # Make a backup of the uninstalled library when relinking
1 # MODE-ARGS vary depending on the MODE. When passed as first option,
1 # MODE must be one of the following:
1 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
1 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
1 # Local Variables:
1 # List of archive names. First name is the real one, the rest are links.
1 # Linker flags that can not go in dependency_libs.
1 # Link the executable and exit
1 # Link the dlpreopened libraries before other libraries
1 # Libtool was configured on host gchirtoaca:
1 # Library versioning type.
1 # Libraries that this one depends upon.
1 # LTCC compiler flags.
1 # Just add the directory containing the .lo file.
1 # Is this an already installed library?
1 # Is the compiler the GNU compiler?
1 # Is shlibpath searched before the hard-coded library search path?
1 # Invoke $ECHO with all args, space-separated.
1 # Install the pseudo-library for information purposes.
1 # Install the old object if enabled.
1 # Install the libtool object if requested.
1 # Install (i.e. copy) a libtool object.
1 # Infer tagged configuration to use if any are available and
1 # Implementation must be kept synchronized with func_dirname
1 # If this variable is set in any of the actions, the command in it
1 # If the previous option needed an argument, then skip it.
1 # If the library was installed with an old release of libtool,
1 # If the file is missing, and there is a .exe on the end, strip it
1 # If libtool objects are unsupported, then we need to preload.
1 # If ld is used when linking, flag to hardcode $libdir into a binary
1 # If it is, it will not operate correctly.
1 # If a disable-shared tag is given, we'll fallback to a static-only
1 # If PATH begins with the sysroot, replace it with = and
1 # If FAIL_CMD is given, eval that upon failure.
1 # If -module or -export-dynamic was specified, set the dlname.
1 # If $tagname still isn't set, then no tagged configuration
1 # I'm not sure if I'm treating the release correctly. I think
1 # How to pass a linker flag through the compiler.
1 # How to hardcode a shared library path into an executable.
1 # How to find potential files when deplibs_check_method = "file_magic".
1 # How to feed a file listing to the archiver.
1 # How to create reloadable object files.
1 # Helper function used by path conversion functions when $build is *nix, and
1 # Helper function used by file name conversion functions when $build is *nix,
1 # Has to be a shell function in order to 'eat' the argument
1 # Global variables:
1 # Global variables.
1 # Get the real and link names of the library.
1 # Get the name of the library we link against.
1 # Generated automatically by config.status (libspectrum) 1.0.0
1 # General help using GNU software: <http://www.gnu.org/gethelp/>.
1 # General Public License for more details.
1 # GNU libtool home page: <http://www.gnu.org/software/libtool/>.
1 # GNU Libtool is free software; you can redistribute it and/or modify
1 # GNU Libtool is free software; you can redistribute it and/or
1 # GNU Libtool is distributed in the hope that it will be useful, but
1 # GNU Libtool is distributed in the hope that it will be useful,
1 # GNU General Public License for more details.
1 # Format of library name prefix.
1 # Flags to create an archive.
1 # Flag to hardcode $libdir into a binary during linking.
1 # Flag that enforces no undefined symbols.
1 # Flag that allows shared libraries with undefined symbols to be built.
1 # Fix the DLL searchpath if we need to. Do this before prepending
1 # Find the relevant object directory and library name.
1 # Find potential files using nocaseglob when deplibs_check_method = "file_magic".
1 # Files to dlopen/dlpreopen
1 # Fast installation is not supported
1 # FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters
1 # FIXME: remove this flag sometime in the future.
1 # FILE even if both FILE and FILE.exe exist: automatic-append-.exe
1 # FILE NAME AND PATH CONVERSION HELPER FUNCTIONS #
1 # FAIL_CMD may read-access the current command in variable CMD!
1 # Extract symbols from dlprefiles and create ${outputname}S.o with
1 # Extract subdirectory from the argument.
1 # Export the shlibpath_var.
1 # Export our shlibpath_var if we have one.
1 # Execute tilde-delimited COMMANDS.
1 # Executable file suffix (normally "").
1 # Evaluate the configuration. Be careful to quote the path
1 # Ensures that function "pointer" variable $to_host_path_cmd is set to the
1 # Ensure that we are using m4 macros, and libtool script from the same
1 # Emit a libtool wrapper script on stdout.
1 # Echos the name of the DLL associated with the
1 # Echo version message to standard output and exit.
1 # Echo short help message to standard output and exit.
1 # Echo program name prefixed warning message to standard error.
1 # Echo program name prefixed message, along with the current mode
1 # Echo program name prefixed message to standard error.
1 # Echo program name prefixed message to standard error, and exit.
1 # Echo program name prefixed message to standard error and set global
1 # Echo program name prefixed message in verbose mode only.
1 # Echo long help message to standard output and exit,
1 # Done checking deplibs!
1 # Don't directly open a file because we may want to
1 # Don't allow lazy linking, it breaks C++ global constructors
1 # Does compiler simultaneously support -c and -o options?
1 # Do we need the "lib" prefix for modules?
1 # Do we need a version for libraries?
1 # Do the static libraries later.
1 # Do not bother doing anything if just a dry run
1 # Do each of the archive commands.
1 # Display the features supported by this script.
1 # Display the configuration for all the tags in this script.
1 # Discover the nlist of each of the dlfiles.
1 # Directory that this library needs to be installed in:
1 # Digital Unix and AIX.
1 # Despite the name, also deal with 64 bit binaries.
1 # Delete the old output file.
1 # Delete the generated files.
1 # Deduce the name of the destination old-style object file.
1 # DLL creation program.
1 # DLL associated with the specified import library LIBNAME.
1 # DIR into the resulting binary.
1 # DIR into the resulting binary and the resulting library dependency is
1 # Cygwin format). Returns an empty string on error.
1 # Create the UAC manifests first if necessary (but the
1 # Create links to the real library.
1 # Create an old-style archive from a shared archive.
1 # Create an invalid libtool object if no PIC, so that we don't
1 # Create a temporary old-style archive to link instead of a shared archive.
1 # Create a libtool object file (analogous to a ".la" file),
1 # Core function for launching the target application
1 # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006,
1 # Copy ARG to func_to_host_path_result.
1 # Copy ARG to func_to_host_file_result.
1 # Converts the path ARG from $build format to $host format. Return result
1 # Converts the file name ARG from $build format to $host format. Return result
1 # Convert path ARG from MSYS to Cygwin format. Requires LT_CYGPATH set.
1 # Convert path ARG from Cygwin to w32 format. Returns result in
1 # Convert path ARG from *nix to w32 format. Requires a wine environment and
1 # Convert path ARG from *nix to Cygwin format. Requires Cygwin installed in a
1 # Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic
1 # Convert file name or path ARG from MSYS format to w32 format. Return
1 # Convert file name ARG from MSYS to Cygwin format. Requires LT_CYGPATH set.
1 # Convert file name ARG from Cygwin to w32 format. Returns result in
1 # Convert file name ARG from *nix to w32 format. Requires a wine environment
1 # Convert file name ARG from *nix to Cygwin format. Requires Cygwin installed
1 # Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic
1 # Convert "-framework foo" to "foo.ltframework"
1 # Compute the dirname of FILE. If nonempty, add APPEND to the result,
1 # Compiler flag to turn off builtin functions.
1 # Compiler flag to prevent dynamic linking.
1 # Compiler flag to generate shared objects directly from archives.
1 # Compiler flag to allow reflexive dlopens.
1 # Compile-time system search path for libraries.
1 # Commands used to install an old-style archive.
1 # Commands used to finish a libtool library installation in a directory.
1 # Commands used to build an old-style archive.
1 # Commands used to build a shared archive.
1 # Commands used to build a loadable module if different from building
1 # Commands to strip libraries.
1 # Commands necessary for linking programs (against libraries) with templates.
1 # Commands necessary for finishing linking programs.
1 # Command to use when deplibs_check_method = "file_magic".
1 # Command to use after uninstallation of a shared archive.
1 # Command to use after installation of a shared archive.
1 # Command to associate shared and link libraries.
1 # Collect dlpreopened libraries
1 # Collect and forward deplibs of preopened libtool libs
1 # Clear the version info if we defaulted, and they specified a release.
1 # Clean up the generated files.
1 # Check whether EXPRESSION matches any line of FILENAME, without output.
1 # Check to see that this really is a libtool object.
1 # Check to see if the archive will have undefined symbols.
1 # Check that each of the things are valid numbers.
1 # Calculate the version variables.
1 # But is supposedly fixed on 10.4 or later (yay!).
1 # Break out early, otherwise skipped_export may be
1 # Assumes file is an ltwrapper_executable
1 # As a safety measure, use it only where a negative result would be
1 # As "finish_cmds", except a single script fragment to be evaled but
1 # Append VALUE to the end of shell variable VAR.
1 # An object symbol dumper.
1 # An echo program that protects backslashes.
1 # An archive.
1 # An ERE matcher.
1 # All path conversion functions are named using the following convention:
1 # Aesthetically quote ARG to be evaled later; same as above,
1 # Aesthetically quote ARG to be evaled later.
1 # Additional compiler flags for building library objects.
1 # Add the libdir to current_libdirs if it is the destination.
1 # Accept any command-line options.
1 # ARGS are passed to cygpath, with the last one being the file name or path to
1 # ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
1 # ARG is the $build file name to be converted to w32 format.
1 # ARG is path to be converted from $build format to win32.
1 # ARG is an MS-style import library. Returns
1 # ARG is a GNU/binutils-style import library. Returns
1 # ARG begins or ends with a path separator character, it is preserved (but
1 # A symbol stripping program.
1 # A standard object.
1 # A sed program that does not truncate output.
1 # A literal string matcher.
1 # A libtool-controlled object.
1 # A libtool-controlled library.
1 # A language specific compiler.
1 # A grep program that handles long lines.
1 # A function to encapsulate launching the target application
1 # A C compiler.
1 # A BSD- or MS-compatible name lister.
1 # 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
1 # /script/ and the wrapper /executable/ which is used only on
1 # --lt-dump-script. There is, deliberately, no --lt-help.
1 # (redirection is the responsibility of the caller)
1 # (escaped) backslashes. A very naive implementation.
1 # (at your option) any later version.
1 # (application programs are unlikely to have options which match
1 # (2), returns the Cygwin file name or path in func_cygpath_result (input
1 # $write_libobj - a libtool object file
1 # $show "echo timestamp > $libobj"
1 # $outputname - a libtool library file
1 # $output - temporary wrapper script for $objdir/$outputname
1 # $opt_dry_run || eval "echo timestamp > $libobj" || exit $?
1 # $host is mingw, cygwin, or some other w32 environment. Relies on a correctly
1 # $build to $host PATH CONVERSION FUNCTIONS #
1 # $build to $host FILE NAME CONVERSION FUNCTIONS #
1 # $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or
1 # $PATH. Assumes ARG has no leading or trailing path separator characters.
1 # ### END LIBTOOL TAG CONFIG: disable-static
1 # ### END LIBTOOL TAG CONFIG: disable-shared
1 # ### END LIBTOOL CONFIG
1 # ### BEGIN LIBTOOL TAG CONFIG: disable-static
1 # ### BEGIN LIBTOOL TAG CONFIG: disable-shared
1 # ### BEGIN LIBTOOL CONFIG
1 # "absolute",i.e impossible to change by setting ${shlibpath_var} if the
1 # include <io.h>
1 # define intptr_t int
1 # define _INTPTR_T_DEFINED
1 # define PATH_SEPARATOR_2 ';'
1 # define DIR_SEPARATOR_2 '\\'
1 # path conversion function : func_convert_path_X_to_Y ()
1 # file name conversion function : func_convert_file_X_to_Y ()
1 # dirname: Compute the dirname of FILE. If nonempty,
1 # basename: Compute filename of FILE.
1 # Written by Gordon Matzigkeit, 1996
1 # This file is part of GNU Libtool.
1 # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
1 # -v, --verbose print more informational messages than default
1 # -n, --dry-run display commands without modifying any files
1 # -h, --help, --help-all print short, long, or detailed help message
1 # --version print version information
1 # --tag=TAG use configuration variables from tag TAG
1 # --quiet, --silent don't print informational messages
1 # --preserve-dup-deps don't remove duplicate dependency libraries
1 # --no-verbose don't print the extra informational messages
1 # --no-quiet, --no-silent
1 # --mode=MODE use operation mode MODE
1 # --features display basic configuration information and exit
1 # --debug enable verbose shell tracing
1 # --config show all configuration variables
1 # uninstall remove libraries from an installed directory
1 # shell:
1 # linker:
1 # link create a library or an executable
1 # install install libraries or executables
1 # host-triplet:
1 # finish complete the installation of libtool libraries
1 # execute automatically set library path, then run a program
1 # compiler:
1 # compiler flags:
1 # compile compile a source file into a libtool object
1 # clean remove files from the build directory
1 # automake:
1 # autoconf:
1 # $progname:
1 # value returned in "$func_relative_path_result"
1 # value returned in "$func_normal_abspath_result"
1 # value returned in "$func_dirname_result"
1 # value retuned in "$func_basename_result"
1 # to NONDIR_REPLACEMENT.
1 # add APPEND to the result, otherwise set result
1 # Inc.
1 # 2006, 2007, 2008, 2009, 2010 Free Software Foundation,
1 # print informational messages (default)
1 "could not follow symlinks for %s", pathspec);
1 "Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
1 "Usage: $progname [OPTION]... --mode=link LINK-COMMAND...
1 "Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND...
1 "Usage: $progname [OPTION]... --mode=finish [LIBDIR]...
1 "Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]...
1 "Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
1 "Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
1 { test -h "$file"; } >/dev/null 2>&1 ||
1 test -n "$library_names"; }; }; then
1 test -f "$inst_prefix_dir$libdir/$linklib" ; then
1 test -f "$file"; then
1 test "$linkmode,$pass" = "prog,scan"; then
1 test "$hardcode_shlibpath_var" = yes; then
1 test "$hardcode_minus_L" != yes &&
1 if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
1 case $host in
1 ]\\([ABCDGIRSTW][ABCDGIRSTW]*\\)[
1 ]*file format pe[i]\{,1\}-/d
1 ]*_\\([_A-Za-z][_A-Za-z0-9]*\\)\\{0,1\\}\$/\\1 _\\2 \\2/p' | sed '/ __gnu_lto/d'"
1 *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
1 &()|`$[]' \
1 && { test "$len" -lt "$max_cmd_len" \
1 $SED -e 10q |
1 $GREP ": [^:]* bundle" >/dev/null ; then
1 $GREP " -> " >/dev/null; then
1 $EGREP "$file_magic_regex" > /dev/null; then
1 || func_fatal_help "\`$lib' is not a valid libtool archive"
1 || func_fatal_help "\`$file' is not a valid libtool archive"
1 || func_fatal_error "\`$lib' is not a valid libtool archive"
1 {0, (void *) 0}
1 { \"$my_originator\", (void *) 0 },"
1 xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
1 win32_libid_type="unknown"
1 win32_fileres=`file -L $1 2>/dev/null`
1 while test -n \"\$file\"; do
1 while test $# -gt 0; do
1 while (strlen (tmp_pathspec) && !has_symlinks)
1 while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
1 weak_libs+=" $arg"
1 void *p = (void *) malloc (num);
1 void *address;
1 vfprintf (stderr, message, ap);
1 versuffix=".$current.$revision";
1 versuffix=".$current.$revision"
1 versuffix=".$current.$age.$revision"
1 versuffix="-$major"
1 versuffix="$major.$revision"
1 versuffix=
1 verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
1 verstring="$verstring_prefix$major.$revision"
1 verstring="$current.$age.$revision"
1 verstring=""
1 verstring+=":${current}.0"
1 vars="deplibs"
1 vars="compile_deplibs finalize_deplibs"
1 valid_a_lib=yes
1 va_start (ap, message);
1 va_list args;
1 va_list ap;
1 va_end (ap);
1 use_static_libs=no
1 unsigned int j;
1 unsigned int backslashes;
1 uninstall)
1 tstripme="$stripme"
1 try_normal_branch=yes
1 try_normal_branch=no
1 tmp_pathspec);
1 tmp_pathspec = xstrdup (newargz[0]);
1 tmp_pathspec = realpath (pathspec, buf);
1 tmp_pathspec = lt_extend_str (target_name, ".exe", 1);
1 tmp_pathspec = lt_extend_str (actual_cwrapper_name, ".exe", 1);
1 tmp_pathspec = find_executable (argv[0]);
1 tmp_pathspec = NULL;
1 tmp_libs+=" $i"
1 tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'`
1 tmp_export_symbols="$export_symbols"
1 tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'`
1 tmp_deplibs="$deplib $tmp_deplibs"
1 thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\`
1 testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'`
1 testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'`
1 test_cmds=
1 test \"x\$thisdir\" = \"x\$file\" && thisdir=.
1 test -z "$libdir" && \
1 test -z "$generated_by_libtool_version" && \
1 test -z "$absdir" && \
1 test -n \"\$absdir\" && thisdir=\"\$absdir\"
1 test -n "$relink_command" && srcname="$realname"T
1 test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
1 test -n "$old_library" && rmfiles+=" $odir/$old_library"
1 test -n "$library_names" && \
1 test -n "$libobj" && \
1 test -n "$func_cygming_ms_implib_tmp"
1 test -n "$func_cygming_gnu_implib_tmp"
1 test -n "$dlpreopen" && dlprefiles+=" $dlpreopen"
1 test -n "$dlopen" && dlfiles+=" $dlopen"
1 test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
1 test -f "$nlist" || : > "$nlist"
1 test -f "$arg" \
1 test "X$libobjs" = "X " && libobjs=
1 test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
1 test "$opt_mode" = compile && func_mode_compile ${1+"$@"}
1 test "$opt_mode" != relink && rpath="$compile_rpath$rpath"
1 test "$opt_debug" = : || preserve_args+=" --debug"
1 test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
1 test "$inst_prefix_dir" = "$destdir" && \
1 test "$absdir" != "$libdir" && \
1 temp_xrpath+=" -R$func_replace_sysroot_result"
1 tdlname=$dlname
1 target_name);
1 target_name = xstrdup (base_name (TARGET_PROGRAM_NAME));
1 target_name = tmp_pathspec;
1 tagname="$1"
1 suppress_opt=no
1 struct stat s;
1 string) : NULL;
1 strendzap (target_name, ".exe");
1 strendzap (actual_cwrapper_path, actual_cwrapper_name);
1 strendzap (actual_cwrapper_name, ".exe");
1 strcpy (newargz[0], actual_cwrapper_path);
1 strcpy (concat_name + p_len + 1, wrapper);
1 strcat (newargz[0], actual_cwrapper_name);
1 strcat (newargz[0], "/");
1 strcat (newargz[0], "$objdir");
1 staticobj=$func_lo2o_result
1 staticdest=$func_lo2o_result
1 staticdest="$destfile"
1 srcname="$realname"
1 srcfile="$arg"
1 soname="$realname"
1 size_t length;
1 size_t len, patlen;
1 size_t i;
1 size_t argc;
1 shrext_cmds="$arg"
1 shift; set dummy --mode uninstall ${1+"$@"}; shift
1 shift; set dummy --mode link ${1+"$@"}; shift
1 shift; set dummy --mode install ${1+"$@"}; shift
1 shift; set dummy --mode finish ${1+"$@"}; shift
1 shift; set dummy --mode execute ${1+"$@"}; shift
1 shift; set dummy --mode compile ${1+"$@"}; shift
1 shift; set dummy --mode clean ${1+"$@"}; shift
1 sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"`
1 set dummy $deplib_matches; shift
1 sed_extractcf="/$re_begincf/,/$re_endcf/p"
1 sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \
1 save_output=$output
1 save_ifs="$IFS"; IFS=','
1 save_RANLIB=$RANLIB
1 s/^$bs2$dollar/$bs&/
1 s/\n//g"
1 s/\n# / /
1 s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g
1 s/$bs4/&\\
1 rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
1 rpath="$finalize_rpath"
1 revision="$2"
1 return xstrdup (tmp_pathspec);
1 return xstrdup (pathspec);
1 return string ? strcpy ((char *) xmalloc (strlen (string) + 1),
1 return str;
1 return s ? s : "(null)";
1 return rval; /* =127, but avoids unused variable warning */
1 return p;
1 return new_value;
1 return new_argv;
1 return lt_${my_prefix}_LTX_preloaded_symbols;
1 return base;
1 return NULL;
1 return 0;
1 return (s && !*s) ? "(empty)" : nonnull (s);
1 reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'`
1 reload_conv_objs="$reload_objs $func_extract_archives_result"
1 relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
1 relink_command="$var=; export $var; $relink_command"
1 relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
1 relink_command="$finalize_var$finalize_command$finalize_rpath"
1 release="-$arg"
1 realname="$1"
1 re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
1 re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
1 quoted_string = XMALLOC (char, length + 1);
1 program_name = (char *) xstrdup (base_name (argv[0]));
1 program=lt-'$outputname'$exeext
1 program='$outputname'
1 progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP`
1 prev=expsyms_regex
1 prev=expsyms
1 prev=$arg
1 prefer_static_libs=built
1 precious_files_regex="$arg"
1 pre_post_deps+=" $pre_post_dep"
1 potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
1 pic_object=$xdir$objdir/$func_lo2o_result
1 pic_object="$xdir$pic_object"
1 pic_object=
1 patlen = strlen (pat);
1 path="-L$absdir/$objdir"
1 path="-L$absdir"
1 p = tmp_pathspec + strlen (tmp_pathspec) - 1;
1 p = quoted_string;
1 outputname=
1 output_la=$func_basename_result
1 output=$save_output
1 output=$output_objdir/$output_la-${k}.$objext
1 oldobjs=$objlist
1 oldobjs="$old_deplibs $non_pic_objects"
1 oldobjs="$libobjs_save"
1 oldobjs=" $archiver_list_spec$func_to_tool_file_result"
1 oldobjs+=" $func_extract_archives_result"
1 oldlibs="$output_objdir/$libname.$libext $oldlibs"
1 old_library=
1 objlist=" $obj"
1 objlist+=" $obj"
1 number_revision="$3"
1 number_minor="$2"
1 number_major="$1"
1 notinst_deplibs='$notinst_deplibs'
1 notinst_deplibs=
1 nonnull (lt_argv_zero));
1 non_pic_object=$xdir$func_lo2o_result
1 non_pic_object="$xdir$non_pic_object"
1 non_pic_object="$pic_object"
1 non_pic_object=
1 noexename=$name
1 newlib_search_path=
1 newlib_search_path+=" $ladir"
1 newlib_search_path+=" $absdir"
1 newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'`
1 newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
1 newdeplibs=$deplibs
1 newdeplibs=""
1 newargz[0] =
1 newargz[++newargc] = NULL;
1 newargz = prepare_spawn (newargz);
1 newargz = XMALLOC (char *, argc + 1);
1 newargc=0;
1 new_libs=
1 new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
1 new_argv[i] = quoted_string;
1 new_argv[argc] = NULL;
1 new_argv = XMALLOC (char *, argc + 1);
1 name="$func_basename_result"
1 my_xlib_u=lt$extracted_serial-$my_xlib ;;
1 mv -f $tmpdir/tmp-la $lib
1 minor_current=$func_arith_result
1 memcpy (concat_name, p, p_len);
1 match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"`
1 major=.$major
1 lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\"
1 lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
1 lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
1 lt_setenv ("DUALCASE", "1"); /* for MSK sh */
1 lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */
1 lt_script_arg0=\$0
1 lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
1 lt_fatal (__FILE__, __LINE__,
1 lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap);
1 lt_dump_script (stdout);
1 lt_dump_args_N=1;
1 lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\n");
1 lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n",
1 lt_debugprintf (__FILE__, __LINE__, "(main) program_name: %s\n", program_name);
1 lt_debugprintf (__FILE__, __LINE__, "(main) lt_argv_zero: %s\n",
1 lt_debugprintf (__FILE__, __LINE__, "(main) argv[0]: %s\n", argv[0]);
1 lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n",
1 lt_debugprintf (__FILE__, __LINE__, "(check_executable): %s\n",
1 lt_argv_zero = lt_extend_str (tmp_pathspec, target_name, 1);
1 loop=$revision
1 loop=$age
1 linknames+=" $link"
1 linklib=$old_library
1 linker_flags+=" $func_quote_for_eval_result"
1 linker_flags+=" $flag"
1 linkalldeplibs=no
1 link_command="$finalize_var$compile_command$finalize_rpath"
1 link_command="$compile_var$compile_command$compile_rpath"
1 libs+=" $opt"
1 library_names=
1 libobjs=$output
1 libobjs+=" $objs"
1 libobjs+=" $func_extract_archives_result"
1 libnameglob=`func_echo_all "$libname" | $SED -e $file_magic_glob`
1 libnameglob=$libname
1 libname=`eval "\\$ECHO \"$libname_spec\""`
1 libname=$func_stripname_result
1 lib_search_path=
1 lib_search_path+=" $dir"
1 lib=$func_resolve_sysroot_result
1 lib="$destdir/$realname"
1 length = 0;
1 len=$len0
1 len=$func_len_result
1 len=$func_arith_result
1 len0=$func_len_result
1 len = strlen (str);
1 ldd_output=`ldd conftest`
1 later+=" $arg"
1 lastarg=$func_stripname_result
1 lastarg="$srcfile"
1 lastarg=
1 last_robj=$output_objdir/$output_la-${k}.$objext
1 last_robj=
1 k=$func_arith_result
1 irix|nonstopux)
1 intptr_t rval = 127;
1 int tmp_len;
1 int rval = 0;
1 int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL);
1 int main() { return 0; }
1 int has_symlinks = 0;
1 int has_slash = 0;
1 int newargc;
1 inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"`
1 inst_prefix_dir="$arg"
1 if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
1 if test \"\$libtool_execute_magic\" != \"$magic\"; then
1 if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
1 if test -z "$to_host_path_cmd"; then
1 if test -z "$pic_object" || test "$pic_object" = none ; then
1 if test -z "$pic_object" ||
1 if test -z "$libdir" && test "$linkmode" = prog; then
1 if test -z "$export_symbols"; then
1 if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then
1 if test -z "$dlname" ||
1 if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
1 if test -z "$absdir"; then
1 if test -z "$abs_ladir"; then
1 if test -z "$4" && test -n "$3"; then
1 if test -z "$2" && test -n "$1" ; then
1 if test -n \"\$lt_option_debug\"; then
1 if test -n "$whole_archive_flag_spec"; then
1 if test -n "$whole_archive_flag_spec" &&
1 if test -n "$tstripme" && test -n "$striplib"; then
1 if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then
1 if test -n "$runpath_var" && test -n "$perm_rpath"; then
1 if test -n "$pic_object" &&
1 if test -n "$old_archive_from_expsyms_cmds"; then
1 if test -n "$non_pic_object" &&
1 if test -n "$link_static_flag"; then
1 if test -n "$library_names" &&
1 if test -n "$inst_prefix_dir"; then
1 if test -n "$i" ; then
1 if test -n "$hardcode_libdir_separator" &&
1 if test -n "$export_symbols_regex"; then
1 if test -n "$export_symbols" && test -z "$export_symbols_regex"; then
1 if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
1 if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
1 if test -n "$deplibrary_names" ; then
1 if test -n "$dependency_libs" &&
1 if test -n "$darwin_arches"; then
1 if test -n "$convenience"; then
1 if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
1 if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then
1 if test -f \"\$progdir/\$program\"; then"
1 if test -f "$output_objdir/$my_outputname.def"; then
1 if test -f "$nlist"S; then
1 if test -f "$arg"; then
1 if test "x$prev" = x-m && test -n "$install_override_mode"; then
1 if test "x$func_stripname_result" != x ; then
1 if test "X$oldobjs" = "X" ; then
1 if test "X$lt_irix_increment" = "Xno"; then
1 if test "X$ll" = "X$old_library" ; then # only static version available
1 if test "$want_nocaseglob" = yes; then
1 if test "$realname" != "$linkname"; then
1 if test "$prev" = rpath; then
1 if test "$prev" = dlprefiles; then
1 if test "$prev" = dlfiles; then
1 if test "$preload" = yes && test -f "$symfileobj"; then
1 if test "$preload" = no; then
1 if test "$pic_object" != none; then
1 if test "$pass" = link; then
1 if test "$package_revision" != "$macro_revision"; then
1 if test "$opt_help" = :; then
1 if test "$non_pic_object" != none; then
1 if test "$need_version" = no; then
1 if test "$module" = yes; then
1 if test "$module" = yes && test -n "$module_cmds" ; then
1 if test "$linkmode" = prog || test "$opt_mode" = relink; then
1 if test "$linkmode" = prog || test "$opt_mode" != relink; then
1 if test "$linkmode" = lib &&
1 if test "$linkmode" != lib && test "$linkmode" != prog; then
1 if test "$link_all_deplibs" != no; then
1 if test "$link_all_deplibs" != no || test -z "$library_names" ||
1 if test "$k" -eq 1 ; then
1 if test "$installed" = yes; then
1 if test "$installed" = no && test "$need_relink" = yes; then
1 if test "$hardcode_direct" != unsupported; then
1 if test "$found" != yes; then
1 if test "$fast_install" = yes; then
1 if test "$fast_install" = no && test -n "$relink_command"; then
1 if test "$deplibs_check_method" != pass_all; then
1 if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
1 if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
1 if test "$allow_undefined_flag" = unsupported; then
1 if test "$alldeplibs" = yes &&
1 if test ! -z "$func_relative_path_result"; then
1 if test ! -f \"\$progdir/\$program\" ||
1 if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
1 if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
1 if test ! -f "$dir/$dlname"; then
1 if func_ltwrapper_p "$file"; then
1 if func_cygming_gnu_implib_p "$1" ; then
1 if eval test -z \"\${$var+set}\"; then
1 if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \
1 if (tmp_pathspec == NULL)
1 if (tmp_pathspec == 0)
1 if (stat (path, &st) >= 0)
1 if (stale) { free ((void *) stale); stale = 0; } \
1 if (rval == -1)
1 if (patlen <= len)
1 if (orig_value && *orig_value)
1 if (lt_debug)
1 if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':')
1 if (isalpha ((unsigned char) name[0]) && name[1] == ':')
1 if (exit_status >= 0)
1 if (S_ISLNK (s.st_mode) != 0)
1 if ((wrapper == NULL) || (*wrapper == '\0'))
1 if ((stat (path, &st) >= 0)
1 if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
1 if (!has_symlinks)
1 if (!has_slash)
1 if $opt_dry_run; then
1 if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
1 if $GREP -v "^: " < "$nlist" |
1 if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
1 help="$generic_help"
1 hardcode_libdirs="$libdir"
1 hardcode_libdirs=
1 gentop="$output_objdir/${obj}x"
1 generated_by_libtool_version='$macro_version'
1 func_warning "relinking \`$file'"
1 func_warning "assuming \`-no-fast-install' instead"
1 func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support."
1 func_warning "\`-version-info/-version-number' is ignored for convenience libraries"
1 func_warning "\`-release' is ignored for convenience libraries"
1 func_warning "\`-no-install' is ignored for $host"
1 func_warning "\`$opt' is not a valid libtool archive"
1 func_verbose "using piecewise archive linking..."
1 func_verbose "using command file archive linking..."
1 func_verbose "using $tagname tagged configuration"
1 func_verbose "generating symbol list for \`$output'"
1 func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
1 func_verbose "extracting global C symbols from \`$dlprefile'"
1 func_to_tool_file "$output_objdir/$libname.libcmd"
1 func_to_tool_file "$obj"
1 func_stripname '=' '' "$dir"
1 func_stripname '/' '/' "$func_relative_path_tcancelled"
1 func_stripname '-l' '' "$deplib"
1 func_stripname '-Wc,' '' "$arg"
1 func_stripname '' '/' "$func_relative_path_result"
1 func_stripname ' ' '' "$lastarg"
1 func_source "$lib"
1 func_source "$func_ltwrapper_scriptname_result"
1 func_source "$file"
1 func_source "$arg"
1 func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"'
1 func_show_eval "${RM}r \$removelist"
1 func_show_eval "$relink_command" \
1 func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \
1 func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?'
1 func_show_eval "$install_prog $file $destfile" 'exit $?'
1 func_resolve_sysroot_result=$1
1 func_resolve_sysroot "$lib"
1 func_resolve_sysroot "$deplib"
1 func_replace_sysroot "$libdir"
1 func_relative_path_tlibdir=$func_normal_abspath_result
1 func_relative_path_tbindir=$func_normal_abspath_result
1 func_relative_path_result=$func_stripname_result
1 func_relative_path_result=
1 func_quote_for_expand "$cmd"
1 func_quote_for_eval "$var_value"
1 func_parse_lt_options \"\$0\" \${1+\"\$@\"}
1 func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
1 func_normal_abspath_tpath=$1
1 func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result
1 func_normal_abspath_result=
1 func_normal_abspath_altnamespace=
1 func_normal_abspath "$2"
1 func_normal_abspath "$1"
1 func_mkdir_p "$gentop"
1 func_ltwrapper_scriptname "$file"
1 func_lo2o "$file"
1 func_lo2o "$destfile"
1 func_lo2o "$arg"
1 func_len " $test_cmds"
1 func_len " $last_robj"
1 func_len " $cmd"
1 func_init_to_host_path_cmd
1 func_fatal_help "you must specify a MODE"
1 func_fatal_help "too many parameters to \`-version-info'"
1 func_fatal_help "libtool library \`$output' must begin with \`lib'"
1 func_fatal_help "invalid operation mode \`$opt_mode'"
1 func_fatal_help "cannot copy a libtool object to \`$destfile'"
1 func_fatal_help "\`$destdir' must be an absolute directory name"
1 func_fatal_error "specify a tag with \`--tag'"
1 func_fatal_error "only absolute run-paths are allowed"
1 func_fatal_error "more than one -exported-symbols argument is not allowed"
1 func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'"
1 func_fatal_error "cannot find name of object for \`$arg'"
1 func_fatal_error "cannot find name of link library for \`$lib'"
1 func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs"
1 func_fatal_error "cannot build library object \`$output' from non-libtool objects"
1 func_fatal_error "\`$deplib' is not a valid libtool archive"
1 func_fatal_error "\`$arg' is not a valid libtool object"
1 func_fatal_configuration "unknown library version type \`$version_type'"
1 func_extract_archives $gentop $convenience
1 func_execute_cmds "$postinstall_cmds" 'exit $?'
1 func_execute_cmds "$finish_cmds" 'admincmds="$admincmds
1 func_exec_program_core \${1+\"\$@\"}
1 func_error "error: relink \`$file' with the above command before installing it"
1 func_error "REVISION \`$revision' must be a nonnegative integer"
1 func_error "CURRENT \`$current' must be a nonnegative integer"
1 func_error "AGE \`$age' must be a nonnegative integer"
1 func_error "AGE \`$age' is greater than the current interface number \`$current'"
1 func_echo "unable to infer tagged configuration"
1 func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'`
1 func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'`
1 func_convert_core_path_wine_to_w32_result=""
1 func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null |
1 func_convert_core_file_wine_to_w32_result="$1"
1 func_basename "$output"
1 func_basename "$dlprefile"
1 func_arith $len0 + $func_len_result
1 func_arith $k + 1
1 func_arith $extracted_serial + 1
1 func_arith $current + 1
1 freebsd-aout|freebsd-elf|qnx|sunos)
1 fprintf (stderr, ".\n");
1 fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode);
1 found=yes
1 found=no
1 for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
1 for searchdir in $searchdirs; do
1 for progfile in $progfiles; do
1 for obj in $oldobjs
1 for n in $library_names; do
1 for lt_wr_arg
1 for lt_opt
1 for lt_arg
1 for libdir in $rpath; do
1 for lib in $notinst_deplibs; do
1 for dlpremoduletest in $dlprefiles; do
1 for dir in $perm_rpath; do
1 for dir in $newlib_search_path; do
1 for dir in $finalize_perm_rpath; do
1 for deplib in $tmp_libs; do
1 for deplib in $new_libs; do
1 for arg in $args; do
1 for (p = wrapper; *p; p++)
1 for (p = path; *p; p = p_next)
1 for (j = backslashes + 1; j > 0; j--)
1 for (i = 1; i < argc; i++)
1 for (i = 0; i < newargc; i++)
1 for (i = 0; i < argc; i++)
1 for (base = name; *name; name++)
1 for (argc = 0; argv[argc] != NULL; argc++)
1 finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
1 finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
1 finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
1 finalize_command+=" @OUTPUT@"
1 finalize_command+=" $wl$qarg"
1 finalize_command+=" $link_static_flag"
1 finalize_command+=" $arg"
1 finalize=yes
1 file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
1 file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\`
1 fi # test -n "$old_archive_from_expsyms_cmds"
1 fi # link_all_deplibs != no
1 fi # $linkmode,$pass = prog,link...
1 fi # $darwin_arches
1 fast_install=no
1 extracted_serial=$func_arith_result
1 export_symbols_regex="$arg"
1 export_symbols=$output_objdir/$libname.def
1 export_symbols="$output_objdir/$libname.uexp"
1 export_symbols="$arg"
1 export $lt_var
1 exit $EXIT_SUCCESS
1 exit $EXIT_FAILURE
1 execv (lt_argv_zero, newargz);
1 eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
1 eval tmp_libs=\"\$$var\"
1 eval test_cmds=\"$old_archive_cmds\"
1 eval soname=\"$soname_spec\"
1 eval shared_ext=\"$shrext_cmds\"
1 eval libname=\"$libname_spec\"
1 eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
1 eval flag=\"$thread_safe_flag_spec\"
1 eval exec "$exec_cmd"
1 eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
1 eval cmds=\"\$cmds~\$RM $delfiles\"
1 eval cmds=\"$finish_eval\"
1 eval cmd=\"$cmd\"
1 eval cmd=\"$cmd1\"
1 eval $var=\"$tmp_libs\"
1 eval "if test \"\${$lt_var+set}\" = set; then
1 eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
1 eval "$prev=\"\$arg\""
1 else # deplib is a libtool library
1 elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then
1 elif test "$linkmode,$pass" = "prog,link"; then
1 elif test "$linkmode" = prog; then
1 elif test "$linkmode" != prog && test "$linkmode" != lib; then
1 elif func_cygming_ms_implib_p "$1" ; then
1 elif eval var_value=\$$var; test -z "$var_value"; then
1 echo EXPORTS > \$output_objdir/\$soname.def;
1 echo "pages."
1 echo "more information, such as the ld(1), crle(1) and ld.so(8) manual"
1 echo "more information, such as the ld(1) and ld.so(8) manual pages."
1 echo "copying selected object files to avoid basename conflicts..."
1 echo "*** make it link in! You will probably need to install it or some"
1 echo "*** library that it depends on before this library will be fully"
1 echo "*** functional. Installing it before continuing would be even better."
1 echo "*** The link will probably fail, sorry"
1 echo "*** And there doesn't seem to be a static archive available"
1 droppeddeps=yes
1 done > $output_objdir/$libname.libcmd
1 done # for deplib
1 dlprefiles+=" $func_resolve_sysroot_result"
1 dlopenmodule=""
1 dlname=$soname
1 dlname="$soname"
1 dlfiles+=" $func_resolve_sysroot_result"
1 dir=$lt_sysroot$func_stripname_result
1 dir="$absdir"
1 dir+="/$objdir"
1 destfile=
1 dest=$arg
1 deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
1 deplibs+=" $func_resolve_sysroot_result"
1 deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
1 deplib_match=$1
1 dependency_libs="$temp_xrpath $dependency_libs"
1 dependency_libs=
1 depdepl=
1 dep_rpath=
1 delfiles+=" $export_symbols"
1 delfiles+=" $export_symbols $output_objdir/$libname.filter"
1 defined (__OS2__)
1 darwin|linux|osf|windows|none)
1 darwin_orig_dir=`pwd`
1 darwin_curdir=`pwd`
1 darwin_base_archive=`basename "$darwin_archive"`
1 darwin_archive=$my_xabs
1 darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
1 cygwin* | mingw* | pw32* | cegcc*)
1 current="$1"
1 cp \$export_symbols \$output_objdir/\$soname.def;
1 counter=1
1 continue # The current "srcfile" will either be retained or
1 const char *s;
1 const char *p_next;
1 const char *p;
1 const char *name;
1 const char *base;
1 concat_name[p_len] = '/';
1 concat_name = xstrdup (wrapper);
1 concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
1 compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
1 compiler_flags+=" $wl$qarg"
1 compiler_flags+=" $wl$func_quote_for_eval_result"
1 compiler_flags+=" $func_quote_for_eval_result"
1 compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
1 compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
1 compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
1 compile_command+=" @OUTPUT@"
1 compile_command+=" $wl$qarg"
1 compile_command+=" $link_static_flag"
1 compile_command+=" $arg"
1 clean|compile|execute|finish|install|link|relink|uninstall) ;;
1 char tmp[LT_PATHMAX + 1];
1 char buf[LT_PATHMAX];
1 char *tmp_pathspec;
1 char *tmp_pathspec = xstrdup (pathspec);
1 char *target_name;
1 char *quoted_string;
1 char *new_value;
1 char *lt_argv_zero;
1 char *concat_name;
1 char *actual_cwrapper_path;
1 char *actual_cwrapper_name;
1 char **newargz;
1 char **new_argv;
1 cd $my_xdir || exit $?
1 cat \$export_symbols >> \$output_objdir/\$soname.def;
1 cat > conftest.c <<EOF
1 case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
1 case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
1 case ,$2, in
1 case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
1 case $win32_fileres in
1 case $tmp_deplibs in
1 case $p in
1 case $need_lib_prefix in
1 case $libdir in
1 case $lib in
1 case $host_os in
1 case $host,$output,$installed,$module,$dlname in
1 case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
1 case $func_resolve_sysroot_result in
1 case $func_normal_abspath_tpath in
1 case $file:$destfile in
1 case $dir in
1 case $1 in
1 case "$pre_post_deps " in
1 case "$perm_rpath " in
1 case "$opt_mode" in
1 case "$lt_sysroot:$1" in
1 case "$host" in
1 case "$future_libdirs " in
1 case "$finalize_perm_rpath " in
1 case "$current_libdirs " in
1 case " $predeps $postdeps " in
1 case " $deplibs " in
1 case " $convenience " in
1 case " $compile_deplibs " in
1 build_old_libs=yes
1 build_libtool_libs=no
1 build_libtool_libs=convenience
1 bindir="$arg"
1 base_compile+=" $lastarg"
1 assert (str != NULL);
1 assert (pat != NULL);
1 args=$func_stripname_result
1 arg_mode=target
1 arg_mode=arg # the next one goes into the "base_compile" arg list
1 arg=$save_arg
1 arg="$pic_object"
1 arg+=" $wl$func_quote_for_eval_result"
1 arg+=" $func_quote_for_eval_result"
1 allow_undefined_flag="$no_undefined_flag"
1 alldeplibs=yes
1 alias -g '\${1+\"\$@\"}'='\"\$@\"'
1 alias -g '${1+"$@"}'='"$@"'
1 age="$3"
1 add="$dir/$old_library"
1 actual_cwrapper_path);
1 actual_cwrapper_path = chase_symlinks (tmp_pathspec);
1 actual_cwrapper_name = xstrdup (base_name (actual_cwrapper_path));
1 actual_cwrapper_name = tmp_pathspec;
1 absdir=\`cd \"\$thisdir\" && pwd\`
1 abs_ladir=`cd "$ladir" && pwd`
1 [\\/]*|[A-Za-z]:\\*) ;;
1 [\\/]* | [A-Za-z]:[\\/]*) ;;
1 [0-9]* | *[!a-zA-Z0-9_]*)
1 XFREE (actual_cwrapper_path);
1 WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1
1 RANLIB=:
1 RANLIB=$save_RANLIB
1 ?*:"$lt_sysroot"*)
1 <trustInfo xmlns="urn:schemas-microsoft-com:asm.v3">
1 <assemblyIdentity version="1.0.0.0"
1 </trustInfo>
1 <!-- Identify the application security requirements. -->
1 ;; # *.$libext
1 ;; # replaced later. I would guess that would be a bug.
1 ::) dllsearchpath=$libdir;;
1 ::) dllsearchpath=$dir;;
1 /* wrapper name transforms */
1 /* very simple arg parsing; don't want to rely on getopt
1 /* target_name transforms -- use actual target program name; might have lt- prefix */
1 /* stop here, and copy so we don't have to do this twice */
1 /* static buffer for getcwd */
1 /* search backwards for last DIR_SEPARATOR */
1 /* execv doesn't actually work on mingw as expected on unix */
1 /* empty path: current directory */
1 /* do NOT want the lt- prefix here, so use actual_cwrapper_name */
1 /* Update the DLL searchpath. EXE_PATH_VALUE ($dllsearchpath) must
1 /* The GNU banner must be the first non-error debug message */
1 /* Skip over the disk name in MSDOS pathnames. */
1 /* Relative path | not found in path: prepend cwd */
1 /* Put quoted arguments into the new argument vector. */
1 /* DO want the lt- prefix here if it exists, so use target_name */
1 /* Count number of arguments. */
1 /* Allocate new argument vector. */
1 /* Absolute path? */
1 -weak LIBNAME declare that the target provides the LIBNAME interface
1 -version-info CURRENT[:REVISION[:AGE]]
1 -static-libtool-libs
1 -static only build a \`.o' file suitable for static linking
1 -static do not do any dynamic linking of uninstalled libtool libraries
1 -shrext SUFFIX override the standard shared library file extension
1 -shared only do dynamic linking of libtool libraries
1 -shared do not build a \`.o' file suitable for static linking
1 -rpath LIBDIR the created library will eventually be installed in LIBDIR
1 -release RELEASE specify package release information
1 -prefer-pic try to build PIC objects only
1 -prefer-non-pic try to build non-PIC objects only
1 -precious-files-regex REGEX
1 -pie | -fpie | -fPIE) ;;
1 -objectlist FILE Use a list of object files found in FILE to specify objects
1 -o OUTPUT-FILE set the output file name to OUTPUT-FILE
1 -o OUTPUT-FILE create OUTPUT-FILE from the specified objects
1 -no-undefined declare that a library does not refer to external symbols
1 -no-suppress do not suppress compiler output for multiple passes
1 -no-install link a not-installable executable
1 -no-fast-install disable the fast-install mode
1 -module build a library that can dlopened
1 -lNAME OUTPUT-FILE requires the installed library libNAME
1 -inst-prefix-dir PREFIX-DIR Use PREFIX-DIR as a staging area for installation
1 -export-symbols-regex REGEX
1 -export-symbols SYMFILE
1 -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
1 -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols
1 -dlopen FILE add the directory containing FILE to the library path
1 -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime
1 -bindir BINDIR specify path to binaries directory (for systems where
1 -avoid-version do not add a version suffix if possible
1 -all-static do not do any dynamic linking at all
1 -Xlinker FLAG pass linker-specific FLAG directly to the linker
1 -Xcompiler FLAG pass linker-specific FLAG directly to the compiler
1 -XCClinker FLAG pass link-specific FLAG to the compiler driver (CC)
1 -Wl,FLAG
1 -Wc,FLAG pass FLAG directly to the compiler
1 -Wc,FLAG
1 -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries
1 -LLIBDIR search LIBDIR for required installed libraries
1 *instal*|*patch*|*setup*|*update*)
1 *executable*) # but shell scripts are "executable" too...
1 *cygwin*)
1 *cygwin* | *mingw* | *cegcc*)
1 *cygwin* | *mingw* )
1 *ar\ archive\ import\ library*) # definitely import
1 *ar\ archive*) # could be an import, or static
1 *[\\/]*)
1 *:*.exe)
1 *.la) ;;
1 *.la | *.lo) ;; # We handle these cases below.
1 *.exe:*.exe)
1 *.exe:*)
1 *.exe) func_stripname '' '.exe' "$output"
1 *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
1 *-*-sysv4*uw2*) add_dir="-L$dir" ;;
1 *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
1 *-*-os2*)
1 *-*-netbsd*)
1 *-*-mingw | *-*-os2* | *-cegcc*)
1 *-*-hpux*)
1 *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
1 *-*-darwin* )
1 *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*)
1 *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*)
1 *) symtab_cflags+=" $arg" ;;
1 *) rmdirs+=" $odir" ;;
1 *) perm_rpath+=" $libdir" ;;
1 *) future_libdirs+=" $libdir" ;;
1 *) func_error "invalid argument for $opt"
1 *) finalize_perm_rpath+=" $libdir" ;;
1 *) exeext= ;;
1 *) dllsearchpath+=":$libdir";;
1 *) dllsearchpath+=":$dir";;
1 *) current_libdirs+=" $libdir" ;;
1 *":$libdir:"*) ;;
1 *":$dir:"*) ;;
1 *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
1 *" $test_deplib "*) ;;
1 *" $pre_post_dep "*) specialdeplibs+=" $pre_post_deps" ;;
1 *" $odir "*) ;;
1 *" $i "*)
1 ( cd "$output_objdir" && \
1 ${RM}r "$tmpdir"
1 $to_host_path_cmd "$1"
1 $to_host_file_cmd "$1"
1 $opt_silent || {
1 $opt_help || {
1 $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
1 $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
1 $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
1 $opt_dry_run || eval "$cmds" || admincmds+="
1 $opt_dry_run || eval "$cmd" || {
1 $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
1 $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
1 $opt_dry_run || ${RM}r "$tmpdir"
1 $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
1 $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
1 $opt_dry_run || $RM conftest.c
1 $opt_dry_run || $RM conftest
1 $exit_cmd $EXIT_FAILURE
1 $RM $output
1 $OBJDUMP -s --section "$1" "$2" 2>/dev/null |
1 $ECHO > $output "\
1 $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
1 $ECHO "*** with $libname but no candidates were found. (...for file magic test)"
1 $ECHO "*** using a regex pattern. Last file checked: $potlib"
1 $ECHO "*** using a file magic. Last file checked: $potlib"
1 $ECHO "*** objects $objs is not portable!"
1 $ECHO "*** Warning: Linking the shared library $output against the non-libtool"
1 $ECHO "*** Warning! Library $i is needed by this library but I was not able to"
1 $ECHO "$win32_libid_type"
1 $ECHO "$func_to_tool_file_result"
1 $2 ) func_to_host_path_result+="$3"
1 $1 ) func_to_host_path_result="$3$func_to_host_path_result"
1 # whole_archive_flag_spec was expanded, because we can't
1 # which has an extra 1 added just for fun
1 # whether they linked in statically or dynamically with ldd.
1 # whether the library exists or not. But this is on
1 # want to use save_libobjs as it was before
1 # verstring for coding it into the library header
1 # value of $libobjs for piecewise linking.
1 # use them later. If we have whole_archive_flag_spec, we
1 # use the current revision as the major version
1 # unfortunately, winepath doesn't convert paths, only file names
1 # though. Also, the filter scales superlinearly with the number of
1 # this just eases exit handling
1 # there is one (and only one) here.
1 # there but not specially marked.
1 # the spec.
1 # the path to end with a slash for ease of parsing, so make sure
1 # the cwrapper.
1 # the command line is too long to link in one step, link in parts
1 # tests/bindir.at for full details.
1 # systems that can't hard-code library paths into their executables
1 # systems (darwin). Don't bleat about dlopened modules though!
1 # shared platforms.
1 # script.
1 # save first non-option argument
1 # preserve --debug
1 # place dlname in correct position for cygwin
1 # pic_flag when linking with -static. The problem exists in
1 # osf3 & osf4 and I'm not really sure... Just
1 # or, if using GNU ld and skipped_export is not :, use a linker
1 # object format with DLL files. See the long comment at the top of
1 # location b/c this prevents finding dependent libraries that
1 # linked before any other PIC object. But we must not use
1 # limits. Maybe even breaks it. We compile a program, linking it
1 # libtool variables, so we have to hard-code the OSs to which it
1 # isn't a blessed tool.
1 # is not unsupported. This is valid on all known static and
1 # install mode needs the following variables:
1 # initialize k to one.
1 # implementing what was already the behavior.
1 # has declared as weak libs
1 # global variables. join(1) would be nice here, but unfortunately
1 # file name can be directly appended.
1 # extension on DOS 8.3 filesystems.
1 # else relative path ending with a slash; either way, target
1 # convenience libraries should have the same extension an
1 # convenience libraries get linked in and end up exceeding
1 # compiling the symbol table file with pic_flag works around
1 # command to the queue.
1 # but it's something to keep an eye on.
1 # but it turns out we can't easily determine that from inspecting
1 # awkward: cmd appends spaces to result
1 # assume the linker understands whole_archive_flag_spec.
1 # are installed to the same prefix.
1 # are installed into $libdir/../bin (currently, that works fine)
1 # archive normally would.
1 # applies here; at the moment, that means platforms that use the PE
1 # and those that subtract age and use age as
1 # and that have no shared library path variable independent of PATH,
1 # and Darwin in order for the loader to find any dlls it needs.
1 # against the deplibs as a proxy for the library. Then we can check
1 # a minor version. But, then there is irix
1 # a FreeBSD bug that causes programs to crash when -lm is
1 # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
1 # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
1 # Will only happen for absolute or sysroot arguments
1 # When we are sourced in execute mode, \$file and \$ECHO are already set.
1 # We need an absolute path.
1 # Warn if it was a shared library.
1 # Warn about portability, can't link against -module's on some
1 # Validate tagname.
1 # Validate options:
1 # Valid mode arguments:
1 # Usually 'no', except on cygwin/mingw when embedded into
1 # Use '-' rather than '.', since we only want one
1 # Try to get the absolute directory name.
1 # Try sorting and uniquifying the output.
1 # This might be a little naive. We might want to check
1 # This may have to be revisited, in case too many
1 # This library was specified with -dlopen.
1 # This is the magic to use -rpath.
1 # This is a shared library
1 # This code stresses the "libraries are programs" paradigm to its
1 # There are really only two kinds -- those that
1 # The previous "srcfile" becomes the current argument.
1 # The library was specified with -dlpreopen.
1 # The given exports_symbols file has to be filtered, so filter it.
1 # The command line is too long to link in one step, link piecewise
1 # The command $test_cmds is almost too long, add a
1 # The PATH hackery in wrapper scripts is required on Windows
1 # Substitute the hardcoded libdirs into the rpath.
1 # Start from root dir and reassemble the path.
1 # Some compilers have problems with a `.al' extension so
1 # See comment for -static flag below, for more details.
1 # Save the value of $output and $libobjs because we want to
1 # Restore the value of output.
1 # Restore leading double-slash if one was found on entry.
1 # Print the debug banner immediately:
1 # Preserve sysroot, but never include relative directories
1 # Prepare the list of exported symbols
1 # Parse options
1 # Only check for convenience libraries
1 # Only an error if not doing a dry-run.
1 # On all known operating systems, these are identical.
1 # On Rhapsody replace the C library with the System framework
1 # Now calculate path; take care to avoid doubling-up slashes.
1 # Note the libdir as a future libdir.
1 # Not a shared library
1 # Normalisation. If bindir is libdir, return empty string,
1 # Non-PIC object.
1 # Make sure we have at least an empty file.
1 # Make sure lib_search_path contains only unique directories.
1 # Make executables depend on our current version.
1 # Link the convenience library
1 # Link against this library
1 # Like Linux, but with the current version available in
1 # Just accumulate the unique libdirs.
1 # Is there a better way of finding the last object in the list?
1 # Install the shared library and build the symlinks.
1 # In fact, it would be nice if we could use this code for all target
1 # Ignore non-libtool-libs
1 # If the PIC object exists, use it instead.
1 # Here we assume that one of hardcode_direct or hardcode_minus_L
1 # Hardcode the library paths
1 # Global variable:
1 # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
1 # Follow symbolic links until we get to the real thisdir.
1 # Find the directory that this script lives in.
1 # FIXME: $output_objdir/$libname.filter potentially contains lots of
1 # Expand the library linking commands again to reset the
1 # Don't test for the "default" C tag, as we know it's
1 # Don't check for shared/static. Everything works.
1 # Don't allow undefined symbols.
1 # Don't allow the user to place us outside of our expected
1 # Do the single finish_eval.
1 # Do each of the archive commands.
1 # Do each command in the postinstall commands.
1 # Do each command in the finish commands.
1 # Do a test to see if this is a libtool program.
1 # Determine the prefix the user has applied to our future dir.
1 # Delete the libtool libraries and symlinks.
1 # Deduce the name of the old-style object file.
1 # Darwin ld doesn't like 0 for these options...
1 # Collect preopened libtool deplibs, except any this library
1 # Clear the reloadable object creation command queue and
1 # Check the variables that should have been set.
1 # Catch anything else as an error
1 # Cancel out all the simple stuff to save iterations. We also want
1 # CHECK ME: I think I busted this. -Ossama
1 # Building a libtool convenience library.
1 # Before this point, $major must not contain `.'.
1 # Bail if the options were screwed
1 # Backslashes separate directories on plain windows
1 # At present, this check doesn't affect windows .dll's that
1 # Ascend the tree starting from libdir
1 # Append the command to remove temporary files to $cmds.
1 # Add the arguments to base_compile.
1 # Add the "lib" prefix for modules if required
1 # Add our own program objects to the symbol list.
1 # Add non-PIC object to the list of files to remove.
1 # Add libraries to $var in reverse order
1 # Add PIC object to the list of files to remove.
1 # Accept the current argument as the source file.
1 # A standard non-PIC object
1 # A PIC object.
1 # ... and its dependency_libs
1 # 's' commands which not all seds can handle. GNU sed should be fine
1 # $xdir was prepended to $pic_object above.
1 # $? = 77 is used to indicate a skipped test to automake.
1 "(main) libtool target name: %s\n",
1 "(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
1 "(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
1 "(lt_setenv) setting '%s' to '%s'\n",
1 { test "$use_static_libs" = no || test -z "$old_library"; }; then
1 { test "$prefer_static_libs" = yes ||
1 { test "$linkmode" != prog && test "$linkmode" != lib; }; then
1 test -z "$non_pic_object" ||
1 test "$pic_object" = none &&
1 test "$non_pic_object" = none; then
1 test "$linkmode,$pass" = "prog,scan" ||
1 test "$len" -lt "$max_cmd_len"; then
1 test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
1 special way:
1 relocations are performed -- see ld's documentation on pseudo-relocs. */
1 newly allocated full path name if found, NULL otherwise
1 libraries that it depends on are installed.
1 len=$func_len_result &&
1 interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a
1 func_len " $test_cmds" &&
1 case " $xrpath " in
1 This wrapper executable should never be moved out of the build directory.
1 The $output program cannot be directly executed until all the libtool
1 Note that spawn() does not by itself call the command interpreter
1 Instead it simply concatenates the arguments, separated by ' ', and calls
1 If it is, it will not operate correctly.
1 Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
1 Does not chase symlinks, even on platforms that support them.
1 CreateProcess(). We must quote the arguments since Win32 CreateProcess()
1 - Unescaped double quotes are removed from the input. Their only effect is
1 - Space and tab are interpreted as delimiters. They are not treated as
1 - But 2*n+1 backslashes followed by a double quote become
1 - Backslashes not followed by double quotes are not special.
1 *) xrpath+=" $temp_xrpath";;
1 *" $temp_xrpath "*) ;;
1 * argz[0], which is handled differently
1 * also, copy all non cwrapper options to newargz, except
1 'stat=$?; rm -f "$lockfile"; exit $stat'
1 # Do not include libc_r directly, use -pthread flag.
1 }' < "$progpath"
1 } | sed -n '1p; 2,$s/^Usage:/ or: /p'
1 || func_fatal_error "symbol file \`$arg' does not exist"
1 | $EGREP "$match_pattern_regex" > /dev/null; then
1 { $RM \"\$progdir/\$program\";
1 xrpath=
1 x86_64-*-* ) echo ' processorArchitecture="amd64"' ;;
1 write_libobj=${1}
1 wrapper=$file
1 win32_libid_type="x86 archive import"
1 win32_libid_type="x86 DLL"
1 whole_archive_flag_spec=
1 while test "$#" -gt 0; do
1 while ((p = strchr (newargz[0], '\\')) != NULL)
1 while ((p = strchr (lt_argv_zero, '\\')) != NULL)
1 weak_libs=
1 vinfo_number=no
1 vinfo=
1 versuffix=".0.0"
1 versuffix=
1 verstring="0.0"
1 verstring="$verstring_prefix$major.$iface:$verstring"
1 verstring="$verstring:${iface}.0"
1 verstring=
1 valid_a_lib=yes
1 trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15
1 trap "$RM $output; exit $EXIT_FAILURE" 1 2 15
1 trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15
1 trap "$RM $cwrappersource $cwrapper $cwrapper.manifest; exit $EXIT_FAILURE" 1 2 15
1 tool_output_objdir=$func_to_tool_file_result
1 to_host_path_cmd="func_convert_path_${func_stripname_result}"
1 tmp_pathspec, nonnull (strerror (errno)));
1 tmp_libs+=" $func_resolve_sysroot_result"
1 tmp_deplibs+=" $test_deplib"
1 thread_safe=no
1 test -z "$libobjs"; then
1 test -z "$install_prog" && \
1 test -z "$cmd" && \
1 test -z "$base_compile" && \
1 test -z "$RM" && \
1 test -n "$save_libobjs" &&
1 test -n "$old_library" && linklib="$old_library"
1 test -n "$old_archive_from_new_cmds" && build_old_libs=yes
1 test -n "$libdir" && rmfiles+=" $odir/$name $odir/${name}i"
1 test -n "$generated" && \
1 test -n "$future_libdirs" && \
1 test -f "$1" &&
1 test -d "$dest" && isdir=yes
1 test "X$libobj" != "X$func_quote_for_eval_result" \
1 test "$pass" = conv && continue
1 test "$lalib_p" = yes
1 test "$compiler_needs_object" = yes &&
1 temp_rpath=
1 temp_deplibs=
1 target)
1 suppress_output=
1 suppress_opt=yes
1 strlen ("$objdir") + 1 + strlen (actual_cwrapper_name) + 1));
1 stripme=
1 staticlibs=
1 srcfile=$func_to_tool_file_result
1 srcfile="$nonopt" # always keep a non-empty value in "srcfile"
1 sprintf (str, "%s=%s", name, value);
1 specialdeplibs=
1 soroot="$soname"
1 soname="$func_basename_result"
1 single_module="${wl}-single_module"
1 shopt -s nocaseglob
1 sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"`
1 sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"`
1 sharedlib_from_linklib_result=""
1 setenv (name, str, 1);
1 set x $save_libobjs
1 set dummy $library_names
1 set dummy $deplib_matches; shift
1 sed '1d
1 searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path"
1 searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
1 save_ifs=$IFS; IFS='~'
1 save_arg=$arg
1 s/^.\{43\}//' |
1 s,.*,import,
1 rmforce=
1 rmfiles+=" ${name}.manifest $objdir/${name}.manifest"
1 rmfiles+=" $odir/$name $odir/${name}S.${objext}"
1 rmfiles+=" $odir/$n"
1 rmfiles+=" $file"
1 rmfiles+=" $dir/$pic_object"
1 rmfiles+=" $dir/$non_pic_object"
1 rmdirs=
1 revision="$number_revision"
1 return NULL;
1 return 1;
1 ret=$?
1 removelist+=" $lockfile"
1 reload_objs=$objlist
1 reload_objs="$objlist $last_robj"
1 relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
1 relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
1 relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'`
1 relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
1 relink_command="$var=; export $var; $relink_command"
1 relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
1 relink_command=
1 relink)
1 release=
1 realname="$1"
1 read lalib_p_line
1 re_endcf='^# ### END LIBTOOL'
1 re_begincf='^# ### BEGIN LIBTOOL'
1 qsrcfile=$func_quote_for_eval_result
1 qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"`
1 prevarg=
1 preload=yes
1 preload=no
1 prefer_static_libs=no
1 precious_files_regex=
1 potlib="$potent_lib" # see symlink-check above in file_magic test
1 pie_flag=
1 pic_object=$xdir$objdir/$func_lo2o_result
1 pic_object="$xdir$pic_object"
1 pic_flag_for_symtable=" $pic_flag" ;;
1 pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;;
1 perm_rpath=
1 outputname=$func_stripname_result ;;
1 outputname="$func_basename_result"
1 output_path=$func_dirname_result
1 output_objdir="$func_dirname_result$objdir"
1 output_name=$func_basename_result
1 output=${output_objdir}/${output_la}.lnkscript
1 output=${output_objdir}/${output_la}.lnk
1 output=$func_to_tool_file_result
1 output=$firstobj\"$file_list_spec$func_to_tool_file_result\"
1 output="$output_objdir/$outputname"i
1 opt="$1"
1 oldobjs+=" $symfileobj"
1 oldlibs=
1 oldlib)
1 old_deplibs=
1 old_convenience=
1 old_convenience+=" $ladir/$objdir/$old_library"
1 oldIFS=$IFS
1 objname="$func_basename_result"
1 objlist+=" $obj"
1 objbase="$func_basename_result"
1 notinst_path= # paths that contain not-installed libtool libraries
1 notinst_deplibs= # not-installed libtool libraries
1 nonstopux) verstring_prefix=nonstopux ;;
1 nonopt="$opt"
1 non_pic_objects=
1 non_pic_object=$xdir$func_lo2o_result
1 non_pic_object="$xdir$non_pic_object"
1 non_pic_object="$pic_object"
1 noexename=$func_stripname_result
1 no_mode=false
1 no_mode=:
1 no_install=no
1 newlib_search_path=
1 newlib=libimp-$func_stripname_result.a
1 newdlfiles+=" $lib"
1 new_inherited_linker_flags=
1 need_relink=no # whether we're linking any uninstalled libtool libraries
1 name += 2;
1 my_xlib=""
1 my_xdir=""
1 my_xabs=""
1 my_template="${TMPDIR-/tmp}/${1-$progname}"
1 my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'`
1 my_pic_p="${3-no}"
1 my_outputname="$1"
1 my_originator="$2"
1 my_oldobjs=""
1 my_oldlibs=${1+"$@"}
1 my_gentop="$1"; shift
1 my_dlsyms=
1 my_directory_path="$1"
1 my_dir_list=
1 moreargs=
1 module=no
1 ltlibs=
1 lt_irix_increment=no
1 lt_fatal (__FILE__, __LINE__, "memory exhausted");
1 lt_fatal (__FILE__, __LINE__, "couldn't find %s", argv[0]);
1 lt_exit=$?
1 lt_dump_args_N=\`expr \$lt_dump_args_N + 1\`
1 lobj=${xdir}$objdir/$objname
1 ll="$l"
1 linklib=$newlib
1 linklib="$l"
1 linker_flags=
1 linkalldeplibs=yes
1 link_static=yes
1 libtool_execute_magic="$magic"
1 libtool_args=$nonopt
1 libobjs_save="$libobjs"
1 libobjs=
1 libobjs+=" $func_extract_archives_result"
1 libobj=
1 libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test
1 libdirs=
1 libdir="$hardcode_libdirs"
1 libdir="$abs_ladir"
1 libdir=
1 lib_search_path=`pwd`
1 lib_linked=yes
1 lib=$ladir/$old_library
1 length++;
1 length += backslashes + 1;
1 len=$func_arith_result
1 ldd_output=`ldd conftest`
1 later=
1 last_oldobj=$obj
1 lalib_p=no
1 ladir="$func_dirname_result"
1 isdir=no
1 int len = strlen (name) + 1 + strlen (value) + 1;
1 install_type=
1 install_shared_prog=$install_prog
1 install_prog+="$func_quote_for_eval_result"
1 inst_prefix_dir=
1 immediate | unsupported)
1 if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
1 if test \"x\$destdir\" != \"x\$file\"; then
1 if test \"\$thisdir\" = \".\"; then
1 if test \"\$libtool_execute_magic\" != \"$magic\"; then
1 if test -z "$whole_archive_flag_spec"; then
1 if test -z "$pic_object" || test "$pic_object" = none ; then
1 if test -z "$old_library"; then
1 if test -z "$install_libdir"; then
1 if test -z "$global_symbol_pipe"; then
1 if test -z "$files"; then
1 if test -z "$1"; then
1 if test -n \"\$relink_command\"; then
1 if test -n "$shlibpath_var"; then
1 if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
1 if test -n "$save_libobjs"; then
1 if test -n "$orig_export_symbols"; then
1 if test -n "$opt_dlopen" && test "$opt_mode" != execute; then
1 if test -n "$old_library"; then
1 if test -n "$my_dlsyms"; then
1 if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then
1 if test -n "$libs"; then
1 if test -n "$library_names"; then
1 if test -n "$libdir" && test ! -f "$libfile"; then
1 if test -n "$install_override_mode" && $no_mode; then
1 if test -n "$hardcode_libdir_flag_spec_ld"; then
1 if test -n "$hardcode_libdir_flag_spec"; then
1 if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then
1 if test -n "$export_symbols_regex" && ${skipped_export-false}; then
1 if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
1 if test -n "$export_symbols" && test -n "$include_expsyms"; then
1 if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
1 if test -n "$dlname"; then
1 if test -n "$dllsearchpath"; then
1 if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
1 if test -n "$current_libdirs"; then
1 if test -n "$available_tags" && test -z "$tagname"; then
1 if test -n "$add_shlibpath"; then
1 if test -f "$output_objdir/$soname-def"; then :
1 if test -f "$output_objdir/$newlib"; then :; else
1 if test -f "$lib"; then
1 if test -f "$absdir/$objdir/$depdepl" ; then
1 if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then
1 if test "x`$SED 1q $export_symbols`" != xEXPORTS; then
1 if test "x$1" != "x$2"; then
1 if test "X$opt_dry_run" = Xfalse; then
1 if test "X$noexename" != "X$name" ; then
1 if test "X$my_pic_p" != Xno; then
1 if test "X$dlpremoduletest" = "X$lib"; then
1 if test "X$deplibs_check_method" = "Xnone"; then
1 if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
1 if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
1 if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
1 if test "$pass" = scan; then
1 if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
1 if test "$pass" = conv; then
1 if test "$pass" != link; then
1 if test "$opt_mode" = relink; then
1 if test "$opt_dry_run" = ":"; then
1 if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
1 if test "$need_locks" = yes; then
1 if test "$module" = yes; then
1 if test "$linkmode" = prog || test "$linkmode" = lib; then
1 if test "$linkmode" = lib; then
1 if test "$linkalldeplibs" = yes; then
1 if test "$lib_linked" != yes; then
1 if test "$len" -lt "$max_cmd_len"; then
1 if test "$isdir" = yes; then
1 if test "$installed" = no; then
1 if test "$hardcode_direct" = yes &&
1 if test "$func_normal_abspath_tpath" = / ; then
1 if test "$fast_install" = yes; then
1 if test "$fast_install" = yes && test -n "$relink_command"; then
1 if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
1 if test "$dlself" = no; then
1 if test "$compiler_needs_object" = yes; then
1 if test "$compiler_c_o" = no; then
1 if test "$build_old_libs" = no; then
1 if test "$build_libtool_need_lc" = "yes"; then
1 if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
1 if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
1 if test "$allow_undefined" = no; then
1 if test "$VERSION" != "$macro_version"; then
1 if test "$?" -ne 0; then
1 if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then
1 if test ! -f "$file"; then
1 if test ! -d \"\$progdir\"; then
1 if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
1 if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \
1 if /usr/bin/file -L $add 2> /dev/null |
1 if (putenv (str) != EXIT_SUCCESS)
1 if (IS_DIR_SEPARATOR (*name))
1 if (*p == '/')
1 if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
1 if ${skipped_export-false}; then
1 ia64-*-* ) echo ' processorArchitecture="ia64"' ;;
1 i?86-*-* ) echo ' processorArchitecture="x86"' ;;
1 help="Try \`$progname --help --mode=$opt_mode' for more information."
1 hardcode_libdirs+="$hardcode_libdir_separator$libdir"
1 gentop="$output_objdir/${outputname}x"
1 generic_help="$help"
1 generated=
1 generated+=" $gentop"
1 future_libdirs=
1 func_xform_result=${1%.*}.lo
1 func_warning "undefined symbols not allowed in $host shared libraries"
1 func_warning "passing it literally to the linker, although it might fail"
1 func_warning "library \`$lib' was moved."
1 func_warning "complete static linking is impossible in this configuration"
1 func_warning "cannot determine absolute directory name of \`$ladir'"
1 func_warning "cannot determine absolute directory name of \`$dir'"
1 func_warning "\`-l' is ignored for archives/objects"
1 func_warning "\`-L' is ignored for archives/objects"
1 func_warning "\`$file' was not linked with \`-export-dynamic'"
1 func_warning "\`$deplib' seems to be moved"
1 func_verbose "generating symbol list for \`$libname.la'"
1 func_verbose "extracting global C symbols from \`$func_to_tool_file_result'"
1 func_verbose "creating linker input file list: $output"
1 func_verbose "creating GNU ld script: $output"
1 func_verbose "$darwin_base_archive has multiple architectures $darwin_arches"
1 func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'`
1 func_tr_sh_result=$1
1 func_to_tool_file "$srcfile" func_convert_file_msys_to_w32
1 func_to_tool_file "$progfile" func_convert_file_msys_to_w32
1 func_to_tool_file "$output_objdir/"
1 func_to_tool_file "$obj"
1 func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"`
1 func_to_host_path_result="$func_convert_core_path_wine_to_w32_result"
1 func_to_host_path_result="$func_convert_core_msys_to_w32_result"
1 func_to_host_file_result=`cygpath -m "$1"`
1 func_to_host_file_result="$func_convert_core_msys_to_w32_result"
1 func_to_host_file_result="$func_convert_core_file_wine_to_w32_result"
1 func_to_host_file_result="$1"
1 func_stripname_result=${func_stripname_result%"${2}"}
1 func_stripname_result=${func_stripname_result#"${1}"}
1 func_stripname_result=${3}
1 func_stripname 'lib' '.dll' "$soname"
1 func_stripname 'func_convert_file_' '' "$to_host_file_cmd"
1 func_stripname '=' '' "$func_resolve_sysroot_result"
1 func_stripname './' '' "$func_relative_path_result/"
1 func_stripname '-R' '' "$deplib"
1 func_stripname '' '/' "$dest"
1 func_stripname '' '.exe' "$outputname"
1 func_stripname '' '.exe' "$name"
1 func_stripname '' '.exe' "$func_basename_result"
1 func_stripname '' '.exe' "$file"
1 func_stripname '' '.exe' "$destfile"
1 func_stripname "$lt_sysroot" '' "$1"
1 func_split_short_opt_name=${1%"$func_split_short_opt_arg"}
1 func_split_short_opt_arg=${1#??}
1 func_split_long_opt_name=${1%%=*}
1 func_split_long_opt_arg=${1#*=}
1 func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?'
1 func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \
1 func_show_eval "$striplib $destdir/$realname" 'exit $?'
1 func_resolve_sysroot_result=$lt_sysroot$func_stripname_result
1 func_replace_sysroot_result=$1
1 func_replace_sysroot_result="=$func_stripname_result"
1 func_relative_path_result=${func_relative_path_result}/${func_stripname_result}
1 func_relative_path_result=$func_stripname_result
1 func_quote_for_expand_result="$my_arg"
1 func_quote_for_expand "$cmd"
1 func_quote_for_eval "${2}"
1 func_quote_for_eval "$var_value"
1 func_quote_for_eval "$srcfile"
1 func_quote_for_eval "$libobj"
1 func_quote_for_eval "$arg"
1 func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
1 func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \
1 func_mode_uninstall ${1+"$@"}
1 func_mode_link ${1+"$@"}
1 func_mode_help
1 func_mkdir_p "$output_objdir"
1 func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
1 func_ltwrapper_scriptname $cwrapper
1 func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1"
1 func_ltwrapper_exec_suffix=
1 func_lo2o "$arg"
1 func_len_result=${#1}
1 func_len " $obj"
1 func_lalib_p "$1"
1 func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file"
1 func_fatal_error "you cannot specify \`-o' more than once"
1 func_fatal_error "require no space between \`-L' and \`$1'"
1 func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'"
1 func_fatal_error "only absolute run-paths are allowed"
1 func_fatal_error "need path for \`-L' option"
1 func_fatal_error "link input file \`$arg' does not exist"
1 func_fatal_error "invalid libtool wrapper script \`$wrapper'"
1 func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir"
1 func_fatal_error "cannot find name of object for \`$arg'"
1 func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
1 func_fatal_error "cannot determine absolute directory name of \`$dir'"
1 func_fatal_error "cannot -dlopen a convenience library: \`$lib'"
1 func_fatal_error "\`$lib' is not a convenience library"
1 func_fatal_error "\`$deplib' is not a valid libtool archive"
1 func_fatal_error "\`$arg' is not a valid libtool object"
1 func_fatal_error "Fatal configuration error."
1 func_fatal_error "$help"
1 func_extract_archives_result="$my_oldobjs"
1 func_extract_archives $gentop $convenience
1 func_extract_an_archive "$my_xdir" "$my_xabs"
1 func_error "missing argument for $1."
1 func_error "See the $PACKAGE documentation for more information."
1 func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'"
1 func_error "Could not determine the host path corresponding to"
1 func_error "Could not determine host file name corresponding to"
1 func_error " \`$3'"
1 func_error " \`$1'"
1 func_emit_wrapper yes |
1 func_emit_wrapper no > $output
1 func_emit_exe_manifest > $output_path/$objdir/$output_name.exe.manifest
1 func_emit_exe_manifest > $cwrapper.manifest
1 func_emit_cwrapperexe_src > $cwrappersource
1 func_dirname_and_basename "$output" "" "."
1 func_dirname_and_basename "$obj" "/" ""
1 func_dirname_and_basename "$1" "" "."
1 func_dirname "$output" "/" ""
1 func_dirname "$lib" "" "."
1 func_dirname "$arg" "/" ""
1 func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null`
1 func_cygpath_result=
1 func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result"
1 func_cygpath -u -p "$func_convert_core_msys_to_w32_result"
1 func_cygpath -u "$func_convert_core_msys_to_w32_result"
1 func_cygpath -u "$func_convert_core_file_wine_to_w32_result"
1 func_convert_core_file_wine_to_w32_tmp=`winepath -w "$1" 2>/dev/null`
1 func_check_version_match
1 func_basename "$soroot"
1 func_basename "$output"
1 func_basename "$obj"
1 func_basename "$deplib"
1 func_arith_result=$(( $* ))
1 func_arith $revision - $loop
1 func_arith $len + $func_len_result
1 func_arith $current - $loop
1 func_arith $current - $age + 1
1 func_arith $current - $age
1 func_append_quoted lastarg "$arg"
1 found=no
1 for tmp in $deplibrary_names ; do
1 for tagname in $taglist; do
1 for search_ext in .la $std_shrext .so .a; do
1 for pass in $passes; do
1 for opt in "$nonopt" ${1+"$@"}
1 for oldlib in $oldlibs; do
1 for obj in $save_libobjs
1 for obj
1 for my_xlib in $my_oldlibs; do
1 for linkname
1 for libdir in $dependency_libs; do
1 for i in $predeps $postdeps ; do
1 for func_convert_core_path_wine_to_w32_f in $1; do
1 for file in $staticlibs; do
1 for file in $opt_dlopen; do
1 for file
1 for fil in `cat "$save_arg"`
1 for dir in $rmdirs; do
1 for dir in $perm_rpath; do
1 for deplib in $deplibs; do
1 for darwin_file in $darwin_filelist; do
1 for darwin_arch in $darwin_arches ; do
1 for cmd1 in $cmds; do
1 for cmd in $concat_cmds; do
1 for cmd in $1; do
1 for arg in $later; do
1 for arg in $CC; do
1 firstobj=
1 finalize_shlibpath=
1 finalize_rpath=
1 finalize_deplibs="-l$name -L$dir $finalize_deplibs"
1 finalize_deplibs="$dir/$old_library $finalize_deplibs"
1 finalize_deplibs="$dir/$linklib $finalize_deplibs"
1 finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
1 finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
1 finalize_command=$nonopt
1 finalize_command+=" @SYMFILE@"
1 file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"`
1 file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\`
1 file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\`
1 file=\"\$\$-\$program\"
1 file=\"\$0\""
1 file=$func_stripname_result
1 f_ex_an_ar_oldlib="$1"
1 f_ex_an_ar_dir="$1"; shift
1 export_symbols_regex=
1 export_symbols="$output_objdir/$outputname.exp"
1 export_symbols="$output_objdir/$libname.exp"
1 export_symbols=
1 export_dynamic=no
1 export $shlibpath_var
1 exit_status=0
1 exit_cmd=exit
1 exit 1
1 exit (exit_status);
1 exit $lt_exit
1 exit $exit_status
1 exit $EXIT_MISMATCH
1 exit $EXIT_FAILURE
1 exeext=.exe
1 eval test_cmds=\"$module_expsym_cmds\"
1 eval test_cmds=\"$module_cmds\"
1 eval test_cmds=\"$archive_expsym_cmds\"
1 eval test_cmds=\"$archive_cmds\"
1 eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
1 eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
1 eval std_shrext=\"$shrext_cmds\"
1 eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\"
1 eval concat_cmds=\"$reload_cmds\"
1 eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
1 eval cmds=\"\$concat_cmds\"
1 eval "func_echo $func_quote_for_expand_result"
1 eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
1 eval "${1}+=\\ \$func_quote_for_eval_result"
1 eval "${1}+=\${2}"
1 eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
1 eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
1 eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"
1 eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms"
1 elif test -n "$soname_spec"; then
1 elif test -n "$runpath_var"; then
1 elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
1 elif test "$need_locks" = warn; then
1 elif test "$hardcode_shlibpath_var" = yes; then
1 elif test "$hardcode_minus_L" = yes; then
1 elif test "$hardcode_automatic" = yes; then
1 echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2
1 echo 'INPUT (' > $output
1 echo '/* NONE */' >> "$output_objdir/$my_dlsyms"
1 echo ')' >> $output
1 echo "host: $host"
1 echo "*** shared version of the library, which you do not appear to have."
1 echo "*** shared version of the library, which I believe you do not have"
1 echo "*** or is declared to -dlopen it."
1 echo "*** its dynamic dependency list that programs get resolved with at runtime."
1 echo "*** because a test_compile did reveal that the linker did not use it for"
1 echo "*** automatically added whenever a program is linked with this library"
1 echo "*** application is linked with the -dlopen flag."
1 echo "*** a static module, that should work as long as the dlopening"
1 echo "*** Warning: libtool could not satisfy all declared inter-library"
1 echo "*** The inter-library dependencies that have been dropped here will be"
1 echo "*** All declared inter-library dependencies are being dropped."
1 done | sort | sort -uc >/dev/null 2>&1); then
1 done # for pass
1 done # for arg
1 done # argument parsing loop
1 done # $darwin_filelist
1 done # $darwin_arches
1 dlself=no
1 dlprefiles=
1 dlprefiles+=" $pic_object"
1 dlprefiles+=" $lib $dependency_libs"
1 dllsearchpath=
1 dlfiles=
1 dir=$output_objdir
1 dir=$func_resolve_sysroot_result
1 dir="$lt_sysroot$libdir"
1 dir="$ladir/$objdir"
1 destfile=$func_stripname_result
1 destfile=$destfile.exe
1 destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\`
1 dest=$func_stripname_result
1 deplibs="$lib $deplibs" # used for prog,scan pass
1 deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
1 deplib_match=$1
1 dependency_libs="$temp_deplibs"
1 dependency_libs="$newdependency_libs"
1 darwin_files=
1 darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u`
1 darwin_file=
1 darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
1 darwin_arch=
1 cygwin* | mingw* | pw32* | os2* | cegcc*)
1 cwrappersource="$output_path/$objdir/lt-$output_name.c"
1 cwrapper="$output_path/$output_name.exe"
1 current_libdirs=
1 current="$number_major"
1 convenience=
1 convenience+=" $ladir/$objdir/$old_library"
1 compiler_flags=
1 compiler_flags+=" $deplib"
1 compile_shlibpath=
1 compile_rpath=
1 compile_deplibs="-l$name -L$dir $compile_deplibs"
1 compile_deplibs="$dir/$old_library $compile_deplibs"
1 compile_deplibs="$dir/$linklib $compile_deplibs"
1 compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
1 compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
1 compile_command=$nonopt
1 compile_command+=" @SYMFILE@"
1 cmds=$module_expsym_cmds
1 cmds=$module_cmds
1 cmds=$export_symbols_cmds
1 cmds=$archive_expsym_cmds
1 cmds=$archive_cmds
1 cmd="$nonopt"
1 chmod +x $output_path/$objdir/$output_name.exe.manifest
1 chmod +x $output
1 chmod +x $cwrapper.manifest
1 char* p;
1 char *str = xstrdup (value);
1 char *str = XMALLOC (char, len);
1 cd $darwin_orig_dir
1 cd "$darwin_orig_dir"
1 case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in
1 case \$lt_wr_arg in
1 case \"\$thisdir\" in
1 case \"\$lt_opt\" in
1 case $win32_fileres in
1 case $realname in
1 case $opt_mode in
1 case $opt in
1 case $my_arg in
1 case $hardcode_action in
1 case $func_relative_path_tbindir in
1 case $func_quote_for_eval_unquoted_result in
1 case $func_normal_abspath_tcomponent in
1 case $destdir in
1 case $arg_mode in
1 case "$rpath " in
1 case "$lib_search_path " in
1 case "$lalib_p_line" in
1 case "$host" in
1 case "$@ " in
1 case " $weak_libs " in
1 case " $predeps $postdeps " in
1 case " $oldobjs " in
1 case " $new_inherited_linker_flags " in
1 case " $library_names " in
1 case " $install_prog " in
1 case " $dlpreconveniencelibs " in
1 build_old_libs=yes
1 build_libtool_libs=no
1 bindir=
1 base_compile="$nonopt $@"
1 base_compile=
1 avoid_version=no
1 arg_mode=normal
1 arg="$pic_object"
1 arg="$non_pic_object"
1 arg2=$install_override_mode
1 age="0"
1 admincmds=
1 add_dir+=" -L$inst_prefix_dir$libdir"
1 absdir="$lt_sysroot$libdir"
1 absdir="$dir"
1 absdir="$abs_ladir/$objdir"
1 abs_ladir="$ladir"
1 \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
1 \$ECHO \"This script is just a wrapper for \$program.\" 1>&2
1 \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
1 \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\"
1 [\\/]*)
1 [\\/]* | [A-Za-z]:[\\/]*) ;;
1 [\\/]* | [A-Za-z]:[\\/]* | =*) deplibs+=" $arg" ;;
1 XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
1 XMALLOC (char, p_len + 1 + strlen (wrapper) + 1);
1 XMALLOC (char, (strlen (actual_cwrapper_path) +
1 RM="$nonopt"
1 PATH=$dllsearchpath:\$PATH
1 IFS=$save_ifs
1 IFS=$oldIFS
1 ECHO=\"$qECHO\"
1 CC_quoted_expanded=`func_echo_all $CC_quoted`
1 CC_quoted=
1 CC_expanded=`func_echo_all $CC`
1 CC) ;;
1 > $tmpdir/tmp-la
1 <security>
1 </security>
1 : > $output
1 10.[0123])
1 1,100{
1 /^In archive [^:]*:/d
1 /^====MARK====/p
1 /^.\{43\}/!d
1 /* always make a copy, for consistency with !HAVE_SETENV */
1 -e "$double_quote_subst" -e "$sed_double_backslash"` ;;
1 -R*) ;;
1 -L*) new_libs="$deplib $new_libs" ;;
1 -L*) func_stripname '-L' '' "$deplib"
1 --lt-dump-script)
1 --lt-debug) lt_option_debug=1 ;;
1 --lt-*) ;;
1 --lt-*)
1 *p++ = '\\';
1 *p++ = '"';
1 *import*) : ;;
1 *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll)
1 *cygwin* | *mingw* | *pw32* | *cegcc*)
1 *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;;
1 *[\ /]"$objbase "*)
1 *[!-_A-Za-z0-9,/]*)
1 *MS\ Windows\ PE\ Intel*)
1 */* | *\\*)
1 *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;
1 *.lo | *.$objext) linkmode=obj ;;
1 *.la) linkmode=lib ;;
1 *.exe) ;;
1 *.dll.a)
1 *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
1 *.ada | *.adb | *.ads | *.asm | \
1 *.[fF][09]? | *.for | *.java | *.obj | *.sx | *.cu | *.cup)
1 *.[cCFSifmso] | \
1 *.$objext | *.gcno)
1 *.$libext) linkmode=oldlib ;;
1 *-*-unixware7*) add_dir="-L$dir" ;;
1 *-*-darwin*)
1 *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
1 *,"$to_tool_file_cmd",*)
1 *) xrpath+=" $dir" ;;
1 *) xrpath+=" $arg" ;;
1 *) tmp_libs+=" $deplib" ;;
1 *) test -n "$dlname" && rmfiles+=" $odir/$dlname" ;;
1 *) set x \"\$@\" \"\$lt_wr_arg\"; shift;;
1 *) rpath+=" $arg" ;;
1 *) oldobjs+=" $obj" ;;
1 *) linkmode=prog ;; # Anything else should be a program.
1 *) lib_search_path+=" $dir" ;;
1 *) lib_linked=no ;;
1 *) func_ltwrapper_exec_suffix=.exe ;;
1 *) false ;;
1 *) deplibs+=" -L$dir" ;;
1 *) deplibs+=" $deplib" ;;
1 *) passes="conv"
1 *) verstring_prefix=sgi ;;
1 *) echo ' processorArchitecture="*"' ;;
1 *" $i "*)
1 *" $dlname "*) ;;
1 *" $deplib_base "*) ;;
1 * ) new_inherited_linker_flags+=" $arg" ;;
1 'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"'
1 $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\`
1 $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
1 $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
1 $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2
1 $opt_verbose && func_echo ${1+"$@"}
1 $opt_silent && exit $EXIT_SUCCESS
1 $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'"
1 $opt_dry_run || $RM $removelist
1 $opt_dry_run || $RM $export_symbols
1 $objdir ) thisdir=. ;;
1 $nocaseglob
1 $my_cmd"
1 $SED -n '/^# Usage:/,/^# *.*--help/ {
1 $SED -n '/^# Usage:/,/# Report bugs to/ {
1 $SED -n '/(C)/!b go
1 $SED -n '
1 $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"`
1 $SED -e '/^\./d;/^.\./d;q'
1 $SED '/^Contents of section '"$match_literal"':/{
1 $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath"
1 $RM \"\$progdir/\$file\"
1 $RM -rf unfat-$$
1 $RM $output
1 $RM $func_ltwrapper_scriptname_result
1 $RM $cwrappersource $cwrapper
1 $RM "${realname}T" && \
1 $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
1 $MV "${realname}U" "$realname" )
1 $MV "$nlist"T "$nlist"
1 $GREP -v "^: " < "$nlist" > "$nlist"S
1 $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1
1 $GREP "$1" "$2" >/dev/null 2>&1
1 $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
1 $ECHO >> $output "\
1 $ECHO "run \`$progname --help | more' for full usage"
1 $ECHO "Try \`$progname --help' for more information about other modes."
1 $ECHO "*** dependencies of module $libname. Therefore, libtool will create"
1 $ECHO "*** Warning: dynamic linker does not accept needed library $i."
1 $ECHO "*** Warning: This system can not link to static lib archive $lib."
1 $ECHO "*** $linklib is not portable!"
1 $ECHO "$progname: ${opt_mode+$opt_mode: }$*"
1 $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2
1 $ECHO "$my_tmpdir"
1 $ECHO "$func_to_tool_file_result"
1 $ECHO "$*"
1 #new_libs="$deplib $new_libs"
1 # zero AND non-empty stdout, which explains the odd construction:
1 # work around that:
1 # we take advantage of case's first-match behaviour.
1 # we now have a list, one entry per line, of the stringified
1 # we can't check for "0.0" in archive_cmds due to quoting
1 # use dlname if we got it. it's perfectly good, no?
1 # unknown
1 # two leading slashes without using negated character classes;
1 # this is ok
1 # these systems don't actually have a c library (as such)!
1 # the symlink we replace! Solaris /bin/ln does not understand -f,
1 # the situation: Compile a separate program for each library.
1 # the last one created.
1 # that the program can be linked against the static library.
1 # that are linked more than once (e.g. -la -lb -la)
1 # statically, we need to preload. We also need to preload any
1 # special handling for platforms with PE-DLLs.
1 # special case for '.'
1 # so we also need to try rm && ln -s.
1 # should not be "improved". See libtool.info.
1 # remove .libs from thisdir
1 # relink executable if necessary
1 # rather than running their programs.
1 # problems, so we reset it completely
1 # practice:
1 # positional parameters, so assign one to ordinary parameter first.
1 # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
1 # note $name still contains .exe if it was in $file originally
1 # not support -o with -c
1 # ms-generated import library
1 # make sure the library variables are pointing to the new library
1 # link against it, someone is ignoring the earlier warnings
1 # into '.;' and ';.', and winepath ignores them completely.
1 # install_prog (especially on Windows NT).
1 # if the lib is a (non-dlopened) module then we can not
1 # figure out the soname
1 # fast_install is set to needless
1 # fails when set -e is in force, so we need another command to
1 # extract the archives, so we have objects to list.
1 # exporting using user supplied symfile
1 # executed on the $host or under an emulation environment.
1 # deplib doesn't seem to be a libtool library
1 # dependent libraries so libltdl's deplib preloader doesn't
1 # convert from *nix to w32, then use cygpath to convert from w32 to cygwin.
1 # contents of the appropriate section of all members of the
1 # compiling, it, like the target executable, must be
1 # command is not found, the shell will set an exit code of 127 and print
1 # check if we have found a prefix of bindir
1 # character.) This should work for all archives with less than
1 # calculate the name of the file, without its directory
1 # but the system doesn't support it.
1 # but linking other static libraries is non-portable.
1 # bomb out in the load deplibs phase.
1 # binutils import library
1 # behavior is inconsistent here; cygpath turns them into '.;' and ';.';
1 # begins with a literal '.' or a single character followed by
1 # because it contains $host paths and files. If cross-
1 # because $build is cygwin, we call "the" cygpath in $PATH; no need to use
1 # bash bug again:
1 # as does the version of $file that was added into $rmfiles
1 # are forced to check the contents of stdout. On the other hand, if the
1 # are always uninteresting
1 # archive which possess that section. Heuristic: eliminate
1 # and winepath ignores them completely.
1 # all those which have a first or second character that is
1 # add $file without .exe
1 # a '.'.
1 # a '.' (that is, objdump's representation of an unprintable
1 # We're trying link a shared library against a static one
1 # We use this script file to make the link, it avoids creating a new file
1 # We should set the runpath_var.
1 # We only need to search for static libraries
1 # We need to know -static, to get the right output filenames.
1 # We need to hardcode the library path
1 # We need to do some special things here, and not later.
1 # We need to display help for each of the modes.
1 # We need to accept at least all the BSD install flags.
1 # Unfortunately, winepath does not exit with a non-zero error code, so we
1 # Try to remove the ${objdir}s in the directories where we deleted files
1 # Try `ln -sf' first, because the `ln' binary might depend on
1 # This variable tells wrapper scripts just to set shlibpath_var
1 # These systems don't actually have a C or math library (as such)
1 # These systems don't actually have a C library (as such)
1 # These lines can sometimes be longer than 43 characters, but
1 # There may be an optional sh(1) argument at the beginning of
1 # The wrapper executable is built using the $host compiler,
1 # The second colon is a workaround for a bug in BeOS R4 sed
1 # The real first argument should be the name of the installation program.
1 # The program doesn't exist.
1 # The next three entries are used to spot a run of precisely
1 # The first file doesn't have a previous command to add.
1 # The first argument is the command name.
1 # TODO: could optimize this to just extract one archive.
1 # Strip any trailing slash from the destination.
1 # Stick the inst_prefix_dir data into the link command.
1 # Some systems cannot cope with colon-terminated $shlibpath_var
1 # See if we need to build an old-fashioned archive.
1 # See if our shared archives depend on static archives.
1 # Sanity checks first:
1 # Rhapsody C library is in the System framework
1 # Rhapsody C and math libraries are in the System framework
1 # Restore the uninstalled library and exit
1 # Replace all uninstalled libtool libraries with the installed ones
1 # Remove leading and trailing path separator characters from ARG. MSYS
1 # Remove leading and trailing path separator characters from
1 # Remove all lines with less than 43 characters
1 # Recognize several different file suffixes.
1 # Processed it all yet?
1 # Preload the old-style object.
1 # Pragmatically, this seems to cause very few problems in
1 # Only execute mode is allowed to have -dlopen flags.
1 # Only build a position-dependent object if we build old libraries.
1 # Only build a PIC object if we are building libtool libraries.
1 # On Cygwin there's no "real" PIC flag so we must build both object types
1 # Of those that remain, print the first one.
1 # Now, create the wrapper script for func_source use:
1 # Now print the configurations for the tags.
1 # Now create the libtool archive.
1 # Need to link against all dependency_libs?
1 # Make sure the xrpath contains only unique directories.
1 # Make a new name for the extract_expsyms_cmds to use
1 # Loop through the commands generated above and execute them.
1 # Lock this critical section if it is needed
1 # Linking convenience modules into shared libraries is allowed,
1 # LT_CYGPATH in this case.
1 # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD.
1 # Just print a warning and add the library to dependency_libs so
1 # It is a libtool convenience library, so add in its objects.
1 # Install the binary that we compiled earlier.
1 # Including no sysroot.
1 # If there was a directory component, then change thisdir.
1 # If there is no dlname, no dlopen support or we're linking
1 # If the user specifies -o file.o, it is replaced with file.lo
1 # If the library has no export list, then create one now
1 # If the PIC object exists, use it instead.
1 # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
1 # Handle -dlopen flags immediately.
1 # Go through the arguments, transforming them on the way.
1 # Get the compilation command and the source file.
1 # From remaining lines, remove first 43 characters
1 # Find all interdependent deplibs by searching for libraries
1 # Finalize command for both is simple: just hardcode it.
1 # Figure out what to do with it
1 # Fallback:
1 # Fallback. This is a deliberately simplistic "conversion" and
1 # FIXME: should reinstall the best remaining shared library.
1 # FIXME: Pedantically, this is the right thing to do, so
1 # Extract subdirectory from the argument.
1 # Extract -R from dependency_libs
1 # Exit here if they wanted silent mode.
1 # Evaluate the configuration.
1 # Error occurred in the first compile. Let's try to salvage
1 # Ensure marker is printed
1 # Don't link with libc until the a.out ld.so is fixed.
1 # Determine the type of output
1 # Delete the old symlinks, and create new ones.
1 # Delete any leftover library objects.
1 # Default configuration.
1 # Darwin sucks
1 # Create the object directory.
1 # Create $newlib
1 # Check to see that the destination is a directory.
1 # Check to see that each library is installed.
1 # Check if any of the arguments is a wrapper script.
1 # Change the help message to a mode-specific one.
1 # Calculate the filename of the output object if compiler does
1 # CHECK ME: I think I busted this. -Ossama
1 # All subsequent reloadable object files will link in
1 # Aesthetically quote it.
1 # Add the symbol object into the linking commands.
1 # Add the search paths of all dependency libraries
1 # Add the dll search path components to the executable PATH
1 # Add our own library path to $shlibpath_var
1 # Add libc to deplibs on all other systems if necessary.
1 # ARG. msys behavior is inconsistent here, cygpath turns them
1 # A standard non-PIC object
1 # A bug in bash halts the script if the last line of a function
1 # A PIC object.
1 # 0x302f exports -- but will fail for DLLs whose name actually
1 # *an error message* to stdout. So we must check for both error code of
1 # $xdir was prepended to $pic_object above.
1 # $file with .exe has already been added to rmfiles,
1 # that some nasty dependency loop isn't accidentally
1 # broken:
1 "unrecognized %s option: '%s'",
1 "error accessing file \"%s\": %s",
1 " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*)
1 " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
1 " ") oldobjs=$obj ;;
1 }' < "$progpath"
1 { { test "$prefer_static_libs" = no ||
1 { test "$hardcode_into_libs" != yes ||
1 { test "$deplibs_check_method" = pass_all ||
1 { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
1 type="win32"/>
1 that within double quotes, space and tab are treated like normal
1 test -z "$non_pic_object" ||
1 test -n "$progdir" || progdir=`pwd`
1 test -n "$hardcode_libdirs"; then
1 test "$prefer_static_libs,$installed" = "built,no"; }; then
1 test "$pic_object" = none &&
1 test "$pic_object" != none; then
1 test "$non_pic_object" = none; then
1 test "$non_pic_object" != none; then
1 test "$hardcode_into_libs" = yes; then
1 test "$dlopen_support" != yes ||
1 save_IFS="$IFS"
1 progdir=`cd "$progdir" && pwd`
1 progdir=$func_dirname_result
1 name="$host_os.$PROGRAM.$outputname"
1 n backslashes followed by a double quote (n >= 0):
1 libraries must come first. */
1 for progdir in $PATH; do
1 exit_cmd=exit
1 exit $?
1 delimiters if they are surrounded by double quotes: "...".
1 characters.
1 break
1 because on Windows, both *_VARNAMEs are PATH but uninstalled
1 be prepended before (that is, appear after) LIB_PATH_VALUE ($temp_rpath)
1 IFS=:
1 IFS="$save_IFS"
1 /^# General help using/b print
1 /^# .* home page:/b print
1 (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") :
1 ' < "$progpath"
1 }) ? "cmd.exe" : "command.com").
1 || test "$max_cmd_len" -le -1; }
1 write_oldobj=none
1 write_oldobj=\'${3}\'
1 write_lobj=none
1 write_lobj=\'${2}\'
1 wrappers_required=yes
1 wrapper=$func_stripname_result
1 wrapper=$func_ltwrapper_scriptname_result
1 win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" |
1 win32_libid_type="x86 DLL"
1 while test -h "$potlib" 2>/dev/null; do
1 while test ! -d "$my_directory_path"; do
1 while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
1 valid_a_lib=no
1 va_start (args, fmt);
1 va_end (args);
1 unsigned int j;
1 uniq > "$nlist"S; then
1 uninstall)
1 tstripme=""
1 tmp_pathspec);
1 tmp_libs=
1 tmp_export_symbols="$export_symbols"
1 tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"`
1 thisdir=\`pwd\`
1 test -z "$libobj" && {
1 test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
1 test -n "$export_symbols$export_symbols_regex" && \
1 test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
1 test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
1 test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
1 test -n "$add" && compile_deplibs="$add $compile_deplibs"
1 test -n "$absdir" && dir="$absdir"
1 test -f "$file" \
1 test -d \\\$dldir || mkdir -p \\\$dldir~
1 test -d "$my_tmpdir" || \
1 test -d "$my_directory_path" || \
1 test "X$libobjs" = "X " && libobjs=
1 test "$preload" = yes \
1 test "$opt_mode" = uninstall && odir="$dir"
1 test "$linkname" != "$realname" \
1 test "$dlself" != no && \
1 test "$build_old_libs" = yes && old_library="$libname.$libext"
1 test "$build_libtool_libs" != yes && libobjs="$non_pic_objects"
1 target )
1 tagname=$z
1 stripped_ext=".exe"
1 str += len - patlen;
1 soname="$realname"
1 soname="$dlname"
1 size_t p_len;
1 shlib_search_path=
1 set dummy $rpath
1 set dummy $files; shift
1 save_mkdir_p_IFS="$IFS"; IFS=':'
1 s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/'
1 s/^====MARK====//
1 s/\n//g
1 s/[\. \t]*$//
1 s/.*/====MARK====/
1 rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR);
1 rpath+="$dir:"
1 rmfiles="$file"
1 rmfiles+=" $odir/lt-${noexename}.c"
1 rmfiles+=" $odir/lt-$name $objdir/lt-${name}.manifest"
1 rmfiles+=" $func_ltwrapper_scriptname_result"
1 return xstrdup (pathspec);
1 return 127;
1 return
1 removelist="$obj $lobj $libobj ${libobj}T"
1 removelist="$lobj $libobj ${libobj}T"
1 removelist+=" $output_obj"
1 reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
1 reload_objs="$objlist $last_robj"
1 reload_conv_objs=
1 relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
1 relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
1 qarg=$func_quote_for_eval_unquoted_result
1 prevarg="$arg"
1 prev=dlprefiles
1 potlib="$potent_lib"
1 pic_flag_for_symtable=" $pic_flag"
1 p_next = (*q == '\0' ? q : q + 1);
1 p_len = q - p;
1 output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext}
1 output_obj=
1 output=$output_objdir/$output_la-${k}.$objext
1 output="$obj"
1 output=
1 orig_export_symbols="$export_symbols"
1 opt_duplicate_compiler_generated_deps=:
1 opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps
1 oldobjs=$objlist
1 oldobjs+=" $gentop/$newobj"
1 oldlibs="$output_objdir/$libname.$libext"
1 oldlibs="$output"
1 oldlibs=
1 oldlib="$destdir/$name"
1 old_dlprefiles="$dlprefiles"
1 old_dlfiles="$dlfiles"
1 objs+="$old_deplibs"
1 objlist=
1 normal )
1 newdlprefiles+=" $deplib"
1 newdlprefiles+=" $abs"
1 newdlfiles+=" $deplib"
1 newdlfiles+=" $abs"
1 newdependency_libs="$deplib $newdependency_libs"
1 newargz[++newargc] = xstrdup (argv[i]);
1 new_value = xstrdup (add);
1 new_value = XMALLOC (char, add_len + orig_value_len + 1);
1 need_relink=yes
1 need_relink=no
1 need_locks=no
1 my_xlib_u=$my_xlib
1 my_xlib="$func_basename_result"
1 my_xdir="$my_gentop/$my_xlib_u"
1 my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
1 my_tmpdir="${my_template}-$$"
1 my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP`
1 my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'`
1 moreargs+=" $fil"
1 lt_replace_pathsep_chars="s|$1|$2|g"
1 lt_fatal (__FILE__, __LINE__,
1 lt_debugprintf (__FILE__, __LINE__, "(main) newargz[%d]: %s\n",
1 lt_argv_zero, nonnull (strerror (errno)));
1 lockfile=$f_ex_an_ar_oldlib.lock
1 lockfile="$output_obj.lock"
1 lockfile=
1 linker_flags+=" -dylib_file ${darwin_install_name}:${depdepl}"
1 link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
1 link)
1 libtool_args+=" $func_quote_for_eval_result"
1 libs="$predeps $libs $compiler_lib_search_path $postdeps"
1 libs+=" $deplib"
1 library_names=
1 libobjs=$output
1 libobjs+=" $symfileobj"
1 libobj=$func_xform_result
1 lib="$searchdir/lib${name}${search_ext}"
1 lib*)
1 length++;
1 len0=$func_len_result
1 int orig_value_len = strlen (orig_value);
1 int len = strlen (new_value);
1 int add_len = strlen (add);
1 install_shared_prog+=" $func_quote_for_eval_result"
1 install_prog="$func_quote_for_eval_result "
1 install_prog=
1 install_prog+=" $func_quote_for_eval_result"
1 install_libdir="$1"
1 install)
1 import*) win32_libid_type="x86 archive import";;
1 if { test -L "$file"; } >/dev/null 2>&1 ||
1 if test -z "$rpath"; then
1 if test -z "$output_obj"; then
1 if test -z "$macro_version"; then
1 if test -z "$libobj"; then
1 if test -z "$global_symbol_pipe"; then
1 if test -z "$func_normal_abspath_result" ; then
1 if test -z "$dest"; then
1 if test -n '\$stripme' && test -n '\$striplib'; then
1 if test -n "$xrpath"; then
1 if test -n "$stripme" && test -n "$old_striplib"; then
1 if test -n "$rpath$xrpath"; then
1 if test -n "$relink_command"; then
1 if test -n "$prev"; then
1 if test -n "$prelink_cmds"; then
1 if test -n "$postlink_cmds"; then
1 if test -n "$pic_flag" || test "$pic_mode" != default; then
1 if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
1 if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
1 if test -n "$old_library"; then
1 if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
1 if test -n "$objs"; then
1 if test -n "$lt_sysroot"; then
1 if test -n "$libobjs" && test "$build_old_libs" = yes; then
1 if test -n "$inst_prefix_dir"; then
1 if test -n "$inst_prefix_dir" &&
1 if test -n "$hardcode_libdir_separator"; then
1 if test -n "$hardcode_libdir_flag_spec"; then
1 if test -n "$gentop"; then
1 if test -n "$func_convert_core_file_wine_to_w32_result" ; then
1 if test -n "$finalize_shlibpath"; then
1 if test -n "$dlname"; then
1 if test -n "$dest"; then
1 if test -n "$convenience"; then
1 if test -n "$compile_shlibpath$finalize_shlibpath"; then
1 if test -n "$arg2"; then
1 if test -n "$arg"; then
1 if test -n "$admincmds"; then
1 if test -n "$addlibs"; then
1 if test -n "$NM" && test -n "$global_symbol_pipe"; then
1 if test -f /etc/ld.so.conf; then
1 if test -f "$lockfile"; then
1 if test -f "$lib"; then
1 if test -d "$opt"; then
1 if test -d "$dir"; then
1 if test "x$build" = "x$host" ; then
1 if test "x$bindir" != x ;
1 if test "X$dlopenmodule" != "X$lib"; then
1 if test "X$dir" = X.; then
1 if test "$wrappers_required" = no; then
1 if test "$valid_a_lib" != yes; then
1 if test "$try_normal_branch" = yes \
1 if test "$suppress_opt" = yes; then
1 if test "$pic_mode" != yes; then
1 if test "$pic_mode" != no; then
1 if test "$pass" = link; then
1 if test "$pass" = dlpreopen; then
1 if test "$pass" = dlopen; then
1 if test "$pass" != dlopen; then
1 if test "$opt_mode" = clean; then
1 if test "$opt_mode" != relink; then
1 if test "$obj" = "$last_oldobj" ; then
1 if test "$no_install" = yes; then
1 if test "$need_locks" != no; then
1 if test "$linkmode,$pass" = "lib,link"; then
1 if test "$linkmode,$pass" = "lib,link" ||
1 if test "$linkmode,$pass" = "lib,dlpreopen"; then
1 if test "$linkmode" = prog; then
1 if test "$hardcode_direct" = yes &&
1 if test "$hardcode_direct" = no; then
1 if test "$hardcode_direct" != yes &&
1 if test "$hardcode_automatic" = yes ; then
1 if test "$hardcode_action" = relink; then
1 if test "$finalize" = yes; then
1 if test "$compiler_c_o" = yes; then
1 if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
1 if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
1 if test "$build_libtool_libs" = convenience; then
1 if test "$build_libtool_libs" != yes; then
1 if test ! -d "$my_tmpdir"; then
1 if sort -k 3 </dev/null >/dev/null 2>&1; then
1 if relink_command_output=\`eval \$relink_command 2>&1\`; then :
1 if ls -lLd "$potent_lib" 2>/dev/null |
1 if func_win32_import_lib_p "$dlprefile"; then
1 if func_lalib_unsafe_p "$arg"; then
1 if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
1 if eval "test -z \"\$$shlibpath_var\""; then
1 if (to_end)
1 if (string[0] == '\0')
1 if (strcmp (str, pat) == 0)
1 if (strcmp (argv[i], ltwrapper_option_prefix) == 0)
1 if (strcmp (argv[i], dumpscript_opt) == 0)
1 if (strcmp (argv[i], debug_opt) == 0)
1 if (path != NULL)
1 if (p_len == 0)
1 if (lstat (tmp_pathspec, &s) == 0)
1 if (IS_DIR_SEPARATOR (wrapper[0]))
1 if $opt_preserve_dup_deps ; then
1 if $opt_duplicate_compiler_generated_deps; then
1 if $opt_dry_run; then
1 if $install_cp; then :; else
1 if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
1 i=""
1 i, nonnull (newargz[i]));
1 has_symlinks = 1;
1 gentop=
1 func_xform "$libobj"
1 func_write_libtool_object "$libobj" "$objdir/$objname" "$objname"
1 func_warning "remember to run \`$progname --finish$future_libdirs'"
1 func_warning "\`$lib' has not been installed in \`$libdir'"
1 func_verbose "generating symbol list for \`$libname.la'"
1 func_verbose "generating import library for \`$soname'"
1 func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
1 func_verbose "extracting exported symbol list from \`$soname'"
1 func_verbose "creating reloadable object files..."
1 func_verbose "creating a temporary reloadable object file: $output"
1 func_to_tool_file_result=$func_to_host_file_result
1 func_to_tool_file_result=$1
1 func_to_tool_file "$1" func_convert_file_msys_to_w32
1 func_to_host_path_result=`echo "$3" |
1 func_to_host_path_result="$3"
1 func_stripname '' '/' "`pwd`"
1 func_source $func_ltwrapper_scriptname_result
1 func_source $dir/$noexename
1 func_source "$lib"
1 func_show_eval_locale "$command" \
1 func_show_eval_locale "$command"
1 func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?'
1 func_show_eval '${RM}r "$gentop"'
1 func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
1 func_show_eval "${RM}r$generated"
1 func_show_eval "$link_command" 'exit $?'
1 func_show_eval "$install_prog \$file \$oldlib" 'exit $?'
1 func_show_eval "$cmd" "${2-:}"
1 func_show_eval "$RM $rmfiles" 'exit_status=1'
1 func_quote_for_eval "$nonopt"
1 func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
1 func_normal_abspath_result=$func_stripname_result
1 func_normal_abspath_altnamespace=/
1 func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
1 func_mkdir_p "$xdir$objdir"
1 func_mkdir_p "$my_xdir"
1 func_len " $test_cmds"
1 func_generate_dlsyms "$outputname" "@PROGRAM@" "no"
1 func_generate_dlsyms "$libname" "$libname" "yes"
1 func_fatal_help "you must specify an output file"
1 func_fatal_help "you must specify an install program"
1 func_fatal_help "you must specify an RM program"
1 func_fatal_help "you must specify a compilation command"
1 func_fatal_help "you must specify a COMMAND"
1 func_fatal_help "the \`$prevarg' option requires an argument"
1 func_fatal_help "the \`$prev' option requires an argument"
1 func_fatal_error "you must specify an argument for -Xcompile"
1 func_fatal_error "you must specify a target with \`-o'"
1 func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib"
1 func_fatal_error "invalid tag name: $tagname"
1 func_fatal_error "cannot find name of link library for \`$lib'"
1 func_fatal_error "cannot determine name of library object from \`$libobj'"
1 func_fatal_configuration "unsupported hardcode properties"
1 func_fatal_configuration "not configured to build any kind of library"
1 func_extract_an_archive "`pwd`" "${darwin_base_archive}"
1 func_execute_cmds "$reload_cmds" 'exit $?'
1 func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
1 func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
1 func_execute_cmds "$old_postinstall_cmds" 'exit $?'
1 func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?'
1 func_execute_cmds "$extract_expsyms_cmds" 'exit $?'
1 func_execute_cmds "$cmds" 'exit $?'
1 func_exec_program \${1+\"\$@\"}
1 func_error "unrecognized option \`-dlopen'"
1 func_dirname_and_basename "$dest" "" "."
1 func_dirname "$file" "" "."
1 func_cygpath_result=
1 func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" |
1 func_convert_core_file_wine_to_w32_result=
1 func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f"
1 func_basename "$obj"
1 func_basename "$my_xlib"
1 func_append_quoted base_compile "$lastarg"
1 func_append_quoted args "$file"
1 func_append_quoted CC_quoted "$arg"
1 for var in $variables_saved_for_relink; do
1 for obj in $save_libobjs
1 for my_dir in $my_dir_list; do
1 for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
1 for libdir in $finalize_rpath; do
1 for libdir in $compile_rpath $finalize_rpath; do
1 for lib in $old_dlprefiles; do
1 for lib in $old_dlfiles; do
1 for i in $dependency_libs ; do
1 for file in $files; do
1 for deplib in $libs; do
1 for deplib in $deplibs; do
1 for deplib in $compile_deplibs; do
1 for arg in $CC; do
1 for (q = p; *q; q++)
1 for (j = backslashes; j > 0; j--)
1 firstobj="$1 "
1 finish)
1 finalize_var=
1 finalize_rpath="$rpath"
1 finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"`
1 finalize_command+=" ${wl}-bind_at_load"
1 finalize_command+=" $finalize_deplibs"
1 finalize_command+=" $arg"
1 finalize=no
1 file=$func_stripname_result
1 fi |
1 fi # test -n "$prev"
1 fbsd_hideous_sh_bug=$base_compile
1 extracted_archives="$extracted_archives $my_xlib_u"
1 export_symbols=$output_objdir/$libname.def
1 export_symbols="$output_objdir/$libname.exp"
1 export_symbols=
1 exit 1
1 exit $ret
1 exit $EXIT_FAILURE
1 execute)
1 exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
1 exec_cmd="\$cmd$args"
1 exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
1 exec \"\$progdir/\$program\" \${1+\"\$@\"}
1 eval test_cmds=\"$reload_cmds\"
1 eval soname=\"$soname_spec\"
1 eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\`
1 eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\"
1 eval dep_rpath=\"$hardcode_libdir_flag_spec\"
1 eval concat_cmds=\"\${concat_cmds}$reload_cmds\"
1 eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
1 eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\"
1 eval cmd=\"$cmd\"
1 eval arg=\"$export_dynamic_flag_spec\"
1 eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
1 eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
1 eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
1 eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
1 eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
1 eval "$my_cmd"
1 eval "$lt_user_locale
1 eval "$lt_safe_locale"
1 esac # arg
1 esac # case $arg_mode
1 else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL)
1 else # not an import lib
1 elif test -n "$old_library"; then
1 elif test -n "$nm_file_list_spec"; then
1 elif test -n "$dlname"; then
1 elif test -f "$opt"; then
1 elif test -d "$file"; then
1 elif test "$rmforce" = yes; then
1 elif test "$hardcode_shlibpath_var" = yes; then
1 elif test "$hardcode_shlibpath_var" = no; then
1 elif test "$hardcode_minus_L" = yes; then
1 elif test "$hardcode_minus_L" = no; then
1 echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
1 echo "in a given directory, LIBDIR, you must either use libtool, and"
1 echo "flag during linking and do at least one of the following:"
1 echo "enable static libraries"
1 echo "enable shared libraries"
1 echo "disable static libraries"
1 echo "disable shared libraries"
1 echo "See any operating system documentation about shared libraries for"
1 echo "Libraries have been installed in:"
1 echo "If you ever happen to want to link against installed libraries"
1 echo "*** you link to this library. But I can only do this if you have a"
1 echo "*** shared version of the library, which you do not appear to have"
1 echo "*** not find such a program. So, this module is probably useless."
1 echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
1 echo "*** libtool will only create a static version of it."
1 echo "*** it was explicitly requested with -no-undefined,"
1 echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
1 echo "*** because either the platform does not support them or"
1 echo "*** because a test_compile did reveal that the linker did not use this one"
1 echo "*** as a dynamic dependency that programs can get resolved with at runtime."
1 echo "*** a static module, that should work as long as the dlopening application"
1 echo "*** \`nm' from GNU binutils and a full rebuild may help."
1 echo "*** Warning: inter-library dependencies are not supported in this platform."
1 echo "*** Warning: inter-library dependencies are not known to be supported."
1 echo "*** Since this library must not contain undefined symbols,"
1 echo "*** I have the capability to make that library automatically link in when"
1 echo "*** However, this would only work if libtool was able to extract symbol"
1 echo "*** But as you try to build a module library, libtool will still create "
1 droppeddeps=yes
1 done # for deplib in $libs
1 dlprefiles="$newdlprefiles"
1 dlprefiles=
1 dlprefiles+=" $pic_object"
1 dlprefiles+=" $arg"
1 dlpath=\\\`\$SHELL 2>&1 -c '. \$dir/'\\\${base_file}'i; echo \\\$dlname'\\\`~
1 dlpath=\$dir/\\\$dldll~
1 dlopenmodule="$dlpremoduletest"
1 dlname=
1 dlfiles="$newdlfiles"
1 dlfiles=
1 dlfiles+=" $pic_object"
1 dlfiles+=" $arg"
1 dldir=\$destdir/\\\`dirname \\\$dlpath\\\`~
1 dir="$func_dirname_result"
1 dir=
1 destname="$func_basename_result"
1 destname=
1 destdir="$func_dirname_result"
1 destdir="$dest"
1 deplibs="$new_libs"
1 deplibs+=" -lc"
1 dependency_libs=$tmp_libs
1 dependency_libs="$newdependency_libs"
1 depdepl=$tmp
1 depdepl="$absdir/$objdir/$depdepl"
1 delfiles+=" $output"
1 delfiles+=" $export_symbols $output_objdir/$libname.filter"
1 darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
1 darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP`
1 const char *string = argv[i];
1 const char *q;
1 const char *path = getenv ("PATH");
1 concat_name = xstrdup (wrapper);
1 compiler_flags+=" ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
1 compile_var=
1 compile_rpath="$rpath"
1 compile_deplibs="$new_libs"
1 compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"`
1 compile_command+=" ${wl}-bind_at_load"
1 compile_command+=" $compile_deplibs"
1 compile_command+=" $arg"
1 compile)
1 command+="$suppress_output"
1 cmds=$module_expsym_cmds
1 cmds=$module_cmds
1 cmds=$archive_expsym_cmds
1 cmds=$archive_cmds
1 clean)
1 chmod a+x \\\$dldir/\$dlname~
1 cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
1 cd "$darwin_curdir"
1 cat >&2 <<_LT_EOF
1 cat >${write_libobj}T <<EOF
1 case \"\$destdir\" in
1 case :$finalize_shlibpath: in
1 case :$compile_shlibpath: in
1 case $win32_nmres in
1 case $outputname in
1 case $output in
1 case $nm_file_list_spec~$to_tool_file_cmd in
1 case $name in
1 case $my_xlib in
1 case $my_dlsyms in
1 case $my_directory_path in
1 case $libdir in
1 case $deplibs_check_method in
1 case $arg_mode in
1 case $@ in
1 case "$temp_rpath:" in
1 case "$perm_rpath " in
1 case "$deplibs " in
1 case " $tmp_libs " in
1 case " $specialdeplibs " in
1 case " $predeps $postdeps " in
1 case " $deplibs " in
1 build_old_libs=yes
1 build_libtool_libs=module
1 break 2
1 base = name + 1;
1 arg=$nonopt
1 arg=$fil
1 arg=$1
1 arg="$non_pic_object"
1 arg="$1"
1 arg2=
1 arg )
1 always_export_symbols=yes
1 add_dir+=" -L$inst_prefix_dir$libdir"
1 add="$libdir/$linklib"
1 absdir=`cd "$dir" && pwd`
1 a_deplib=""
1 \$install_prog \$dir/\$dlname \\\$dldir/\$dlname~
1 \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
1 [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
1 IFS=$save_ifs
1 IFS=$oldIFS
1 IFS="$save_mkdir_p_IFS"
1 CC_quoted_expanded=`func_echo_all $CC_quoted`
1 CC_quoted=
1 CC_expanded=`func_echo_all $CC`
1 <requestedPrivileges>
1 </requestedPrivileges>
1 :para
1 /more detailed .*MODE/d
1 /information about other modes/d
1 /^When reporting/,/^Report/{
1 /^====MARK====/ b para
1 /./p' |
1 /* some systems can't cope with a ':'-terminated path #' */
1 /* otherwise ... */
1 /* not found in PATH; assume curdir */
1 /* no slashes; search PATH */
1 /* no more DIR_SEPARATORS left */
1 /* failed to start process */
1 -weak)
1 -version-number)
1 -version-info)
1 -thread-safe)
1 -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \
1 -static)
1 -static | -static-libtool-libs)
1 -shrext)
1 -shared-libgcc|-static-libgcc|-static-libgfortran|-static-libstdc++| \
1 -rpath)
1 -release)
1 -prefer-pic)
1 -prefer-non-pic)
1 -precious-files-regex)
1 -objectlist)
1 -o) prev=output ;;
1 -no-undefined)
1 -no-install)
1 -no-fast-install)
1 -multi_module)
1 -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
1 -msg_*)
1 -module)
1 -model|-arch|-isysroot|--sysroot)
1 -inst-prefix-dir)
1 -g | -m | -o)
1 -fstack-protector*)
1 -framework)
1 -f) RM+=" $arg"; rmforce=yes ;;
1 -export-symbols | -export-symbols-regex)
1 -export-dynamic)
1 -dlpreopen)
1 -dlopen)
1 -d) isdir=yes ;;
1 -bindir)
1 -avoid-version)
1 -allow-undefined)
1 -all-static)
1 -all-static | -static | -static-libtool-libs)
1 -\?|-h)
1 -\?*|-h*|-n*|-v*)
1 -Xlinker)
1 -Xcompiler)
1 -XCClinker)
1 -Wl,*)
1 -Wc,*)
1 -R*) func_stripname '-R' '' "$libdir"
1 -O*|-flto*|-fwhopr*|-fuse-linker-plugin| \
1 -L[A-Z][A-Z]*:*)
1 -L*) path="$deplib" ;;
1 -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
1 --version)
1 --verbose|-v)
1 --tag)
1 --silent|--quiet)
1 --preserve-dup-deps)
1 --no-verbose)
1 --no-silent|--no-quiet)
1 --mode)
1 --help-all)
1 --finish)
1 --features)
1 --dry-run|--dryrun|-n)
1 --dlopen|-dlopen)
1 --debug|-x)
1 --config)
1 --*=*)
1 -*) RM+=" $arg" ;;
1 -* | +*)
1 -* | *.la | *.lo ) ;;
1 *p++ = c;
1 *p++ = '"';
1 *mingw* | *cygwin* )
1 *cygwin* | mingw* | *cegcc*)
1 *cygwin* | *mingw* | *cegcc* )
1 *cygwin* | *mingw* )
1 *cegcc* | *mingw32ce*)
1 *[\\\`\"]*)
1 *[\\\`\"\$]*)
1 *[\\\ /]cp\ *) install_cp=: ;;
1 *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
1 *.c)
1 *.$objext)
1 *-darwin*)
1 *-*-rhapsody* | *-*-darwin1.[012])
1 *-*-darwin*)
1 *) tmp_libs+=" $deplib" ;;
1 *) thisdir=\"\$thisdir/\$destdir\" ;;
1 *) temp_rpath+="$absdir:" ;;
1 *) temp_deplibs+=" $libdir";;
1 *) newdlfiles+=" $lib" ;;
1 *) newdependency_libs+=" $deplib" ;;
1 *) new_inherited_linker_flags+=" $tmp_inherited_linker_flag";;
1 *) install_cp=false ;;
1 *) func_apped perm_rpath " $libdir" ;;
1 *) finalize_shlibpath+="$libdir:" ;;
1 *) files+=" $arg" ;;
1 *) deplibs="$path $deplibs" ;;
1 *) compile_shlibpath+="$add_shlibpath:" ;;
1 *) ;;
1 *) func_lo2o_result=${1} ;;
1 *) win32_libid_type="x86 archive static";;
1 *":$libdir:"*) ;;
1 *":$add_shlibpath:"*) ;;
1 *"$absdir:"*) ;;
1 *" $tmp_inherited_linker_flag "*) ;;
1 *" $path "*) ;;
1 *" $func_resolve_sysroot_result "*)
1 *" $deplib "*) new_libs="$deplib $new_libs" ;;
1 *" $deplib "*) ;;
1 *" $deplib "*)
1 ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO);
1 (void) vfprintf (stderr, fmt, args);
1 (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line);
1 ( cd "$output_objdir" && \
1 'exit $?'
1 && func_warning "libobj name \`$libobj' may not contain shell special characters."
1 && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH)))
1 && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"'
1 $to_tool_file_cmd "$1"
1 $opt_silent || {
1 $opt_dry_run || rm -f "$lockfile"
1 $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
1 $opt_dry_run || eval "$cmd" || {
1 $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
1 $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
1 $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname
1 $opt_dry_run || $RM $obj $libobj
1 $opt_dry_run || $RM $export_symbols
1 $opt_dry_run && current_libdirs=" -n$current_libdirs"
1 $func_relative_path_tlibdir*)
1 $func_relative_path_tlibdir)
1 $STRIP $cwrapper
1 $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath"
1 $SED -e 4q "$1" 2>/dev/null \
1 $RM \"\$progdir/\$file\"
1 $RM $export_symbols
1 $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
1 $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; }
1 $MV "${write_libobj}T" "${write_libobj}"
1 $MKDIR \"\$progdir\"
1 $LTCC $LTCFLAGS -o $cwrapper $cwrappersource
1 $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
1 $LIPO -create -output "$darwin_file" $darwin_files
1 $ECHO \
1 $ECHO "*** Warning: dynamic linker does not accept needed library $i."
1 $ECHO "*** Warning: Linking the shared library $output against the loadable module"
1 $ECHO "*** Warning: Linking the executable $output against the loadable module"
1 $ECHO "$srcfile" > "$lockfile"
1 $ECHO "$help" 1>&2
1 $ECHO "$func_basename_result"
1 $ECHO "$cmd$args"
1 $ b para
1 #for path in $notinst_path; do
1 #done
1 # word splitting, command substitution and and variable
1 # word splitting and command substitution for a subsequent eval.
1 # with having the same library being listed as a
1 # which system we are compiling for in order to pass an extra
1 # which of the given symbols are data symbols and tag
1 # we shouldn't force the makefile maintainer to figure out
1 # we need to preload.
1 # we know (pedantically, we assume) the library does not
1 # using -Wl,-lname, so that libtool does not consider it
1 # turning comma into space..
1 # to make a dll which has undefined symbols, in which case not
1 # though. Also, the filter scales superlinearly with the number of
1 # this by putting the import library name into $newdlprefiles.
1 # them as such. So, trigger use of export_symbols_cmds.
1 # the one in the tagged configuration.
1 # the list of exported symbols" if statement, so the
1 # the extraction.
1 # the above command should be used before it gets too long
1 # that all symbols are satisfied, otherwise we get a static library.
1 # than once as an explicit dependence of a library, or
1 # template prelinking step
1 # symbols from the import library if a shared library is present
1 # such unportable linking tricks to link the library
1 # static and shared are present. Therefore, ensure we extract
1 # so, if we see these flags be careful not to treat them like -L
1 # so that -L comes before libs that need it for instance...
1 # single-version convenience libraries. Whenever we create
1 # reloadable object file. All subsequent reloadable object
1 # reload_cmds runs $LD directly, so let us get rid of
1 # really was required.
1 # over CIFS/SMB, so we conserve a leading double slash if found.
1 # or/and link against static libraries
1 # on failure, ensure result is empty
1 # occurrences thereof are not removed. Compare this
1 # note: this script will not be executed, so do not chmod.
1 # not to be eliminated).
1 # non-PIC code in shared libraries is not supported
1 # need to be listed more than once, so we keep only the
1 # name in a special purpose variable, and (later) extracting the
1 # lt_preloaded_symbols. The linker will fail if global_symbol_pipe
1 # loop can be closed while we follow links,
1 # last copy. This is not always right, but it is rare
1 # isn't a blessed tool.
1 # is implicitly linked in more than once by the
1 # include_expsyms logic still works.
1 # if we don't check for them as well.
1 # if an import library, we need to obtain dlname
1 # global variables. join(1) would be nice here, but unfortunately
1 # get the directories listed in $shlibpath_var
1 # for duplicate removal.
1 # flag for every libtool invocation.
1 # files will link in the last one created.
1 # export_symbols gets reassigned inside the "prepare
1 # expansion for a subsequent eval.
1 # even a static library is built. For now, we need to specify
1 # enough that we require users that really mean to play
1 # endless loop below, in case of cyclic links.
1 # don't eliminate duplications in $postdeps and $predeps
1 # doesn't work or if tool conversion is not needed.
1 # dlname from the la file.
1 # different ones for PIC/non-PIC, this we'll have to duplicate
1 # dependency of multiple other libraries: in this case,
1 # compiler, it is considered special, and multiple
1 # classes, name mangling, and exception handling.
1 # can't use Xsed below, because $i might contain '/'
1 # but so what?
1 # but not from the CC environment variable when configure was run.
1 # bleh windows
1 # are required to link).
1 # and it's NOT already a .def file. Must figure out
1 # and for example Cygwin uses it to access remote file shares
1 # allow_undefined=no
1 # Without this assignment, base_compile gets emptied.
1 # While some portion of DIR does not yet exist...
1 # We recover the dlopen module name by 'saving' the la file
1 # We might still enter an endless loop, since a link
1 # We keep going just in case the user didn't refer to
1 # We cannot seem to hardcode it, guess we'll fake it.
1 # Unusual form of absolute path, do nothing.
1 # Unlock the critical section if it was locked
1 # Try looking first in the location we're being installed to.
1 # Tru64 UNIX uses -model [arg] to determine the layout of C++
1 # Time to change all our "foo.ltframework" stuff back to "-framework foo"
1 # The statement above tries to avoid entering an
1 # The preopen pass in lib mode reverses $deplibs; put it back here
1 # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
1 # The given exports_symbols file has to be filtered, so filter it.
1 # The compiler in the base compile command matches
1 # Test again, we may have decided not to build it any more
1 # Take the normal branch if the nm_file_list_spec branch
1 # Suppress compiler output if we already did a PIC compilation.
1 # Some other compiler flag.
1 # Some other compiler argument.
1 # Set up the ranlib parameters.
1 # Separate optargs to long options:
1 # Separate non-argument short options:
1 # Search the libtool library
1 # Run the actual program with our arguments.
1 # Return a directory name, but don't create it in dry-run mode
1 # Restore saved environment variables
1 # Replace the output file specification.
1 # Remove trailing dots and whitespace
1 # Remove the marker
1 # Remove sysroot references
1 # Remember odir for removal later, being careful to avoid duplicates
1 # Relative path, prepend $cwd.
1 # Quote the relink command for shipping.
1 # Quote the link command for shipping.
1 # Quote arguments (to preserve shell metacharacters).
1 # Protect directory names starting with `-'
1 # Print
1 # Preserve any variables that may affect compiler behavior
1 # Preload the old-style object.
1 # Prefer using a static library (so that no silly _DYNAMIC symbols
1 # Place marker at beginning of archive member dllname section
1 # Otherwise, use the dlname, so that lt_dlopen finds it.
1 # Only create the output if not a dry run.
1 # Only actually do things if not in dry run mode.
1 # Objects from convenience libraries. This assumes
1 # Nullify the symbol file.
1 # Now prepare to actually exec the command.
1 # Now hardcode the library paths
1 # Now create the wrapper script.
1 # Now add the directory to shlibpath_var.
1 # Now actually substitute the argument into the commands.
1 # Not necessarily an ordinary path; POSIX reserves leading '//'
1 # Not a directory, so check to see that there is only one file specified.
1 # No point in relinking DLLs because paths are not encoded
1 # Need to hardcode shared library paths
1 # Maybe just do a dry run.
1 # Make sure we only generate libraries of the form `libNAME.la'.
1 # Make sure the rpath contains only unique directories.
1 # Make sure dlprefiles contains only unique files
1 # Make sure dlfiles contains only unique files that won't be dlpreopened
1 # Loop over the list of objects to be linked.
1 # Linker will automatically link against shared library if both
1 # Last step: remove runtime libs from dependency_libs
1 # LD_LIBRARY_PATH before the program is installed.
1 # Just move the object if needed, then go on to compile the next one
1 # Just move the object if needed
1 # Join marker and all lines until next marker into a single line
1 # It is impossible to link a dll without this setting, and
1 # If we're not in dry-run mode, bomb out on failure
1 # If we're not building shared, we need to use non_pic_objs
1 # If we ascended to the root using ".." the result may be empty now.
1 # If there is no dlopen support or we're linking statically,
1 # If the previous option needs an argument, assign it.
1 # If mktemp works, use that first and foremost
1 # If libtool objects are unsupported, then we need to preload.
1 # If a -bindir argument was supplied, place the dll there.
1 # Handle the remaining objects by creating one last
1 # Get the name of the library object.
1 # Get the absolute pathname.
1 # Follow soft links.
1 # Flags to be passed through unchanged, with rationale:
1 # FIXME: Unfortunately, there are problems with the above when trying
1 # FIXME: $output_objdir/$libname.filter potentially contains lots of
1 # Extract the objects.
1 # Exit if we aren't doing a library object file.
1 # Empty path, that just means $cwd.
1 # Eliminate all temporary directories.
1 # Double-quote args containing other shell metacharacters.
1 # Don't error if the file doesn't exist and rm -f was used.
1 # Do each installation.
1 # Do each command in the postuninstall commands.
1 # Do each command in the postinstall commands.
1 # Do each command in the old_postuninstall commands.
1 # Do each command in the archive commands.
1 # Do a symbolic link so that the libtool archive can be found in
1 # Display what would be done.
1 # Delete the old output files.
1 # Delete the old objects.
1 # Darwin uses the -arch flag to determine output architecture.
1 # Create the old-style object.
1 # Compute libraries that are listed more than once in $predeps
1 # Check to see that this really is a libtool object.
1 # Blanks in the command may have been stripped by the calling shell,
1 # Blanks at the start of $base_compile will cause this to fail
1 # Bail out if we (or some other process) failed to create a directory.
1 # Assume this is the tagged configuration we want.
1 # Append the command to create the export file.
1 # And here is the reason: when a library appears more
1 # Allow error messages only from the first compilation.
1 # All the library-specific variables (install_libdir is set above).
1 # Aesthetically quote the previous argument.
1 # Aesthetically quote the argument.
1 # Aesthetically quote it.
1 # Absolute path, do nothing.
1 # A libtool-controlled object.
1 # @file GCC response files
1 # -{shared,static}-libgcc, -static-{libgfortran|libstdc++}
1 # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler
1 # -tp=* Portland pgcc target processor selection
1 # -r[0-9][0-9]* specify processor for the SGI compiler
1 # -q* compiler args for the IBM compiler
1 # -p, -pg, --coverage, -fprofile-* profiling flags for GCC
1 # -no-undefined on the libtool link line when we can be certain
1 # -msg_* for osf cc
1 # -m*, -t[45]*, -txscale* architecture-specific flags for GCC
1 # -fstack-protector* stack protector flags for GCC
1 # -Wl from whole_archive_flag_spec and hope we can get by with
1 # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization
1 # -F/path path to uninstalled frameworks, gcc on darwin
1 # -64, -mips[0-9] enable 64-bit mode for the SGI compiler
1 # --sysroot=* for sysroot support
1 # +DA*, +DD* enable 64-bit mode for the HP compiler
1 # (they stay in deplibs)
1 # (otherwise, the dlopen module name will be incorrect). We do
1 # 's' commands which not all seds can handle. GNU sed should be fine
1 # $postdeps and mark them as special (i.e., whose duplicates are
1 # link against specified runtime library
1 "checking path component for symlinks: %s\n",
1 "(main) failed to launch target \"%s\": %s\n",
1 "") ;;
1 " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;;
1 " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
1 { test "$build_libtool_libs" = yes &&
1 test \"X\$file\" != \"X\$progdir/\$program\"; }; then
1 test -z "$old_library"; }; then
1 test -x "$progdir/$progname" && break
1 test "$link_static" = yes; }; then
1 test "$hardcode_direct_absolute" = no; then
1 test "$build_old_libs" = yes ||
1 removelist+=" $p"
1 int line, const char *mode,
1 if test "X$precious_files_regex" != "X"; then
1 const char *message, va_list ap)
1 case $nonopt in *shtool*) :;; *) false;; esac; then
1 \\\\\" -> \\"
1 \\\" -> \"
1 \$RM \\\$dlpath"
1 \" -> "
1 IFS="$save_IFS"
1 $cmds"
1 $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then
1 $EGREP "$match_pattern_regex" > /dev/null; then
1 # Allow the use of GNU shtool's install command.
1 | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
1 wrappers_required=no
1 umask 0077
1 umask $save_mktempdir_umask
1 tmp_deplibs=
1 test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=.
1 sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"`
1 sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;"
1 sysroot_cmd=
1 save_mktempdir_umask=`umask`
1 s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
1 relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'`
1 prev=weak
1 outputname="$tmpdir/$file"
1 opt_verbose=false
1 newdlprefiles+=" $dir/$dlname"
1 my_tmpdir="${my_template}-${RANDOM-0}$$"
1 my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"`
1 my_dir_list="$my_directory_path:$my_dir_list"
1 my_arg="\"$my_arg\""
1 my_arg="$1" ;;
1 lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\`
1 lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\`
1 if test -z "$func_relative_path_result"; then
1 if test -z "$func_convert_core_path_wine_to_w32_result"; then
1 if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then
1 if test "x$func_relative_path_tlibdir" = x ; then
1 if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
1 if test "$build_libtool_libs" != yes; then
1 if eval "$relink_command"; then :
1 func_warning "cannot relink \`$file'"
1 func_tr_sh "$dlprefile"
1 func_tr_sh "$dir/$linklib"
1 func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
1 func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir"
1 func_resolve_sysroot "$deplib"
1 func_relative_path_tlibdir=${func_dirname_result}
1 func_relative_path_tcancelled=$func_stripname_result
1 func_relative_path_tcancelled=
1 func_relative_path_result=../$func_relative_path_result
1 func_quote_for_eval_unquoted_result="$1" ;;
1 func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\""
1 func_quote_for_eval_result="$func_quote_for_eval_unquoted_result"
1 func_normal_abspath_result=/
1 func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent
1 func_normal_abspath_result=$func_dirname_result
1 func_help
1 func_fatal_help "invalid operation mode \`$opt_mode'"
1 func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
1 func_fatal_error "Failed to create \`$1'"
1 func_extract_an_archive "$my_xdir" "$my_xabs"
1 func_dirname $func_relative_path_tlibdir
1 func_dirname "$func_normal_abspath_result"
1 func_dirname "$deplib" "" "."
1 func_basename "$lib"
1 func_arith $current - $age
1 finalize_command+=" $arg"
1 file="$outputname"
1 exit 1
1 exit 0
1 eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\"
1 eval '\$striplib \\\$dldir/\$dlname' || exit \\\$?;
1 eval '$ECHO ": $name " >> "$nlist"'
1 eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname"
1 eval "curr_lafile=\$libfile_$func_tr_sh_result"
1 eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
1 done
1 dlprefile_dlbasename=""
1 deplib=$func_resolve_sysroot_result
1 continue
1 compiler_flags+=" $arg"
1 compile_command+=" $arg"
1 cat \"\$lt_dump_D/\$lt_dump_F\"
1 case $my_directory_path in */*) ;; *) break ;; esac
1 case " $extracted_archives " in
1 \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2
1 \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2
1 \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2
1 XFREE (str);
1 <requestedExecutionLevel level="asInvoker" uiAccess="false"/>
1 -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"`
1 -e "$pathcdr"`
1 -e "$pathcar"`
1 -*) my_directory_path="./$my_directory_path" ;;
1 *cygwin* | *mingw* | *cegcc* )
1 '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
1 && test "$dlopen_support" = unknown \
1 ${RM}r "$tmpdir"
1 $opt_silent || {
1 $SED -e "$lt_sed_naive_backslashify"`
1 $SED -e "$lt_replace_pathsep_chars"`
1 $RM "${realname}T" && \
1 $RM "$lockfile"
1 $MKDIR "$my_tmpdir"
1 $MKDIR "$my_dir" 2>/dev/null || :
1 # try to create one of the directories concurrently. Don't
1 # stop in that case!
1 # mkdir can fail with a `File exist' error if two processes
1 # found an exact match
1 # found a matching prefix
1 # at the start of this file.
1 # Trailing empty path component, ignore it.
1 # Replace the output file specification.
1 # Parent dir; strip last assembled component from result.
1 # If the last portion added has no slash in it, the list is done
1 # Generic help is extracted from the usage comments
1 # Failing that, at least try and use $RANDOM to avoid a race
1 # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway.
1 # Actual path component, append it.
1 # ...otherwise throw away the child directory and loop
1 # ...make a list in topmost first order. Use a colon delimited
1 v.dwPlatformId == VER_PLATFORM_WIN32_NT;
1 test "$prefer_static_libs,$installed" = "built,yes"; } ||
1 test "$hardcode_direct_absolute" = no; then
1 output=$func_stripname_result ;;
1 newlib_search_path+=" $func_resolve_sysroot_result"
1 func_resolve_sysroot "$func_stripname_result"
1 GetVersionEx(&v);
1 strcpy (new_value, orig_value);
1 strcpy (new_value, add);
1 strcpy (new_value + orig_value_len, add);
1 strcpy (new_value + add_len, orig_value);
1 save_$lt_var=\$$lt_var
1 pie_flag+=" $arg"
1 output=$func_stripname_result.exe;;
1 new_value[len-1] = '\0';
1 lt_fatal (__FILE__, __LINE__,
1 lt_debug = 1;
1 if test -n "$dlprefile_dlname" ; then
1 if test -n "$dlprefile_dlbasename" ; then
1 if ${skipped_export-false}; then
1 func_relative_path_tcancelled=$func_relative_path_tbindir
1 func_relative_path_result=../$func_relative_path_result
1 func_relative_path_result=.
1 func_quote_for_expand "$relink_command"
1 func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result"
1 func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result"
1 eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
1 eval '$ECHO ": $name " >> "$nlist"'
1 eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
1 eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe |
1 eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
1 esac
1 echo "removing references to $lt_sysroot and \`=' prefixes from $lib"
1 dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"`
1 continue;
1 case $host in
1 break
1 ;;
1 /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
1 'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'
1 $lt_var=C
1 # Use subshell, to avoid clobbering current variable values
1 # Have to descend all the way to the root!
1 temp_xrpath=$func_stripname_result
1 -e 's/^/ fputs ("/' -e 's/$/\\n", f);/'
1 */
1 func_warning "Could not compute DLL name from $name"
1 func_basename "$dlprefile_dlname"
1 eval '$ECHO ": $name " >> "$nlist"'
1 eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"'
1 esac
1 dlprefile_dlbasename=$sharedlib_from_linklib_result
1 dlprefile_dlbasename="$func_basename_result"
1 deplib_base=$func_basename_result
1 $sharedlib_from_linklib_cmd "$dlprefile"
1 $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'"
1 ## Okay now we've a bunch of thin objects, gotta fatten them up :)
1 # no lafile. user explicitly requested -dlpreopen <import library>.
1 they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
1 report an error. Otherwise, targets might begin to believe
1 or a configure.ac-settable value.
1 need to make LTWRAPPER_OPTION_PREFIX a configure-time option
1 namespace. The first time any user complains about this, we'll
1 namespace, but it is not one of the ones we know about and
1 have already dealt with, above (inluding dump-script), then
1 nonnull (strerror (errno)));
1 func_to_host_path "$temp_rpath"
1 func_to_host_path "$dllsearchpath:"
1 -L*) func_stripname '-L' '' "$deplib"
1 *) func_resolve_sysroot "$deplib" ;;
1 $SED -e 's/\([\\"]\)/\\\1/g' \
1 specialdeplibs+=" $func_resolve_sysroot_result" ;;
1 eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
1 eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
1 $lt_var=\$save_$lt_var; export $lt_var
1 nonempty (wrapper));
1 "(main) found exe (before symlink chase) at: %s\n",
1 "(main) found exe (after symlink chase) at: %s\n",
1 func_resolve_sysroot "$func_stripname_result";;
1 try to export only the symbols matching REGEX
1 try to export only the symbols listed in SYMFILE
1 specify library version info [each variable defaults to 0]
1 ltwrapper_option_prefix, argv[i]);
1 libraries must be found in the PATH setting at runtime)
1 don't remove output files matching REGEX
1 do not do any dynamic linking of libtool libraries
1 if test -z "$darwin_install_name"; then
1 fi
1 darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
1 nonnull (strerror (errno)));