Top 10k strings from README in <root> / bin / pc / Emulators / fuse-hc2000-hacks.7z / src / libspectrum /

Back to the directory listing

   1 which means that it is distributed in the hope that it will be useful,
   1 use on your system. If you want to install it somewhere other than
   1 to ensure that the linker can find libspectrum. Either read the
   1 the full license.
   1 running 'configure' for the first time.
   1 output of ZX Spectrum emulator files slightly easier than it would be
   1 otherwise. It should hopefully compile and run on Unix-based systems,
   1 of the released tarballs, you'll need to run `autogen.sh' before
   1 libspectrum is made available under the GNU General Public License,
   1 libspectrum is a library which is designed to make the input and
   1 libspectrum 1.0.0
   1 it under `DIR'. Once installed, some work will probably be necessary
   1 instructions printed when you do `make install' or ask your local
   1 http://fuse-emulator.sourceforge.net/libspectrum.php
   1 but WITHOUT ANY WARRANTY; without even the implied warranty of
   1 and then `make install' should install it in `/usr/local' ready for
   1 `/usr/local', give the `--prefix=DIR' option to `configure' to install
   1 Win32 and Mac OS X.
   1 Wii. At the time of writing, those haven't been ported yet.
   1 To compile for the Wii, first make sure the dev tools are in your path
   1 Then, type "make" and if everything went well, "make install".
   1 That is assuming you don't have gcrypt, glib and libaudiofile for the
   1 Philip Kendall <[email protected]>
   1 On Unix and Mac OS X, compiling libspectrum should just be as easy as
   1 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See `COPYING' for
   1 If you're using version of libspectrum from Subversion rather than one
   1 For updates for libspectrum, its homepage is at:
   1 For details on the functions available, see `doc/libspectrum.txt'.
   1 Currently supported are:
   1 Compiling from Subversion
   1 Compiling for the Wii
   1 =================
   1 16 December 2010
   1 ./configure --target=powerpc-gekko --host=powerpc-gekko \
   1 -------------------------
   1 ---------------------
   1 * Timex cartridges: .dck (read only).
   1 * Tape images: .tzx, .tap, .spc, .sta and .ltp (read/write) and
   1 * Snapshots: .z80, .szx, .sna (all read/write), .zxs, .sp., .snp and
   1 * Microdrive cartridge images: .mdr (read/write).
   1 * Input recordings: .rzx (read/write).
   1 * IDE hard disk images: .hdf (read/write).
   1 * Disk images: .dsk (both plain and extended), .fdi, .sad, .scl, .td0,
   1 (export PATH=$PATH:$DEVKITPPC/bin). Then, use this configure line:
   1 $ ./configure
   1   Warajevo .tap, Z80Em and CSW version 1 (read only).
   1   .trd and .udi (identification only).
   1   +D snapshots (read only).
   1     --without-gcrypt --without-glib --without-libaudiofile
   1     --prefix=$DEVKITPPC \